Dreambox 7020si Set Up

[soidog2]

Help setting up

I used to have a two-dish “Dynasat” moving system.

Was crap, I bought a 7020Si Dreambox , now I am trying it to set it up with only marginal success.

Flashed the Pli Jade image, set it up on my Lan updated & set up the viewable satellites.

Where I get stuck, is trying to lock & store signals with the positioner.

I must have some wrong settings somewhere.

If I connect the box with the fixed dish , set it up with a single LNB , I can acquire the satellite immediately , so the box is good .

If you are familiar with the setup, please point me in the right direction.

Thanks

[joncl]

Help setting up

I used to have a two-dish "Dynasat" moving system.

Was crap, I bought a 7020Si Dreambox , now I am trying it to set it up with only marginal success.

Flashed the Pli Jade image, set it up on my Lan updated & set up the viewable satellites.

Where I get stuck, is trying to lock & store signals with the positioner.

I must have some wrong settings somewhere.

If I connect the box with the fixed dish , set it up with a single LNB , I can acquire the satellite immediately , so the box is good .

If you are familiar with the setup, please point me in the right direction.

Thanks

So ask you dealer for help mate, the quickest and easiest way to do it and no fuss.

[NHJ]

do you mean dual feed on the same dish with an engine moving the dish position?

if so you need to say to your box you're using disecq or toneburst with engine, you might also need to say the box wich feed is receiving wich satellite to start the scan.