![](https://assets.aseannow.com/forum/uploads/set_resources_40/84c1e40ea0e759e3f1505eb1788ddf3c_pattern.png)
Slimdawg
-
Posts
18 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Posts posted by Slimdawg
-
-
I found a company that is willing to lend money.
Not sure if I will use them or not? Or if they are legit? Not recommending them only Posting this incase anyone else is looking for info.
https://fastloaninternational.com
3.75% annual interest rate
-
On 2/4/2020 at 4:07 PM, Isaanbiker said:
My bike has a vary unusual rear tire size and it's impossible to find a 150/90-15
Two things matter the rim size 15" and how much room you have.
Change the tire size. Except the 15 and this opens up for more options.
-
16 hours ago, Isaanbiker said:
A new valve for tubeless tires from a car shop should fit into a motorcycle rim, does it? Does anybody have an idea?
If you are asking questions like this you need to let your boyfriend take care of this!
Valve stems come in different sizes, you either buy the correct size or drill it out to fit. It isn't that complicated.
Honestly, get a man to fix this.
-
1
-
-
5 hours ago, ChouDoufu said:
what does it matter how long it takes to stop?
Swift
-
11 hours ago, josephbloggs said:
I literally received my loan money today, and I have only had a work permit for less than a year. It wasn't easy but it was possible. As mentioned when I replied at the beginning I think with no earnings or WP in Thailand it would be next to impossible but no harm in trying. UOB came good for me.Glad to see that worked out for you, there is another company I am in contact with called MBK Finance. I'll see were it goes with them.
11 hours ago, observer90210 said:Assuming you are from the EU, I would take the loan back in Europe where banks are lending at 0% or close, depending on the relationship established with the customer. If from elsewhere, cannot say ....
Ya my home country will not help as I'm a non resident. A low interest loan like that would be nice though.
-
There is definitely a lot of people that dont need to reply to this thread.
Bottom line is I would like to take a personal loan and it seems difficult.
I understand the replies that you have given.
I'll just save the money and wait.
I dont see the need to make personal attacks over a question about getting a personal loan.
21 hours ago, dinsdale said:Guess you should have bought a 5 million baht villa but as you're struggling for money there's always the Chinese money lenders. Maybe sell the Harley or the trailblazer. 2.5 mil over 18 months. Must be tough going in you need a loan.
I never said I was struggling, i was only hoping to get all of the renovations done at once. The reply of the vehicle was just to state from a previous question about other assets
18 hours ago, mike787 said:22 hours ago, Isaanbiker said:YEP!! Too much time on their hands. Unbelievable..no other options for these troll morons....
<deleted>? I'm a troll Moron? Your the one that is replying to my post with fk all for any bit of valuable info. Trolling
People take personal loans all the time where I'm from, I'm sorry if this triggers you. Douche bag
15 hours ago, Iron Tongue said:If the home needs 2.5 million baht of rennovations, then wouldn't your home only be worth 4.5 million?
Are you serious? I cant believe I am even replying to this, but I would like to add additions on to the home.
-
1
-
-
My gf does not work, so they will not lend the money to her as they have no way to see how she can pay back.
I understand about the house losing value but I only want the loan for over 18 months.im willing to have the gf sign off the land or in other words cosign so the bank could technically take everything if I didnt pay, no?
To me a car should depreciate more than a house. But that's irrelevant as I dont make the rules.
I do have a 2020 Harley motorcycle and a 2017 chevy trailblazer both paid in full.
-
CharliH
They offer loans without a work permit?
I'm honestly not concerned about interest rate as much as the simple fact they will lend the cash.
Thanks for the replys
-
Hi,
Looking to borrow 2.5 million baht,to do some home renovations.
I'm a expat that owns a villa worth roughly 7 million baht, the land is in my Gf name.
I make good money but the income is not made in thailand.
My gf does not work.
Is there anyway to borrow money?
Most banks will only do this if it's a condo
-
1
-
-
Thanks gents
id like to get to the track soon and yes its good for finding the right companies.
I had HKS in my favorites already,, NRB shop looks like it would be worth checking out.
As for the ECM and dyno, I do my own tuning and have a fairly local dyno to play on.
-
ok thanks!
-
basically id like to find a shop that does numerous machining too, valve work, cylinder honing.
-
Im in Hua Hin, a shop in Bangkok would be fine. The pistons and rods are substantially lighter than OEM, hence why I would get it balanced.
Its internally balanced, but I am ok with externally doing just the crank and rods/slugs.
-
1
-
-
Hello
Im trying to find a engine shop that can balance my engine rotating assembly.
I have bought some rods and pistons from a American company and in need of balancing the Crank with the new connecting rods/pistons.
-
As previously mentioned i would run a air kill on a solenoid. Actually be quite simple.
You can even spend a little more and use a bluetooth actuated solenoid, and control it by your phone.
Also,its much better to kill the air on a diesel than kill the fuel.
-
I raced prostreet diesel in North america for 5 years and have been tuning diesel motors since 2005. took a stock 6.6L Duramax and made it into a 1420 RWHP fuel only machine.
if your diesel is blowing black smoke its not running efficiantly, its simply over fueld and you EGTs suffer, inturn you will burn up valve train and scorch your pistons. If it rattles like a tractor you have to much timing and well have to much cyl pressure. it will burn it up.
I tune the ECM/TCM of 2.5L Chevys here as a hobby of mine, I own a 2017 trailblazer with a twin turbo setup that i built. I personally dont worry about warranty as i can fix what ever i break myself. My friends vehicles i tune, i only add around 40 RWHP. They get better fuel mileage due to the TCM tuning and more efficiant ECM i do and have more passing power. My Blazer is running 100hp over for over 60 000 km now, i can raise it but i love the way it drives as is and still have stock everything except for the intercooler that i blew when i first installed the second turbo.
If you are buying a tuner, chip, programmer here are things to consider:
- Can you read clear DTCs
- how many things does it adjust Eg: fuel pressure, pulse width, timing, boost, vane posistion of turbo, EGR funtions, TCM tables. Obviously the more the better.
-Is your tuning switable on the fly.
- Can you upgrade for free.
- Is it a CANNED tune or is it actually custom tuned your vehicle.
- Can you log it while driving,monoitor your timing, boost, pulse width and temps.
I guess in closing, i dont like stock anything, is it worth it to tune it? Depends on the tuning. but 99% of men love horse power. so ya its worth it!
Expat looking to borrow money for home renos
in Jobs, Economy, Banking, Business, Investments
Posted
Very possible. They havnt asked for my bank details or cash up front....Yet.
I've decided to just do the old fashion method and save my money and build when I have enough money extra.
It's nice not having any payments other than regular utilities.