Mr_Happy
-
Posts
106 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Posts posted by Mr_Happy
-
-
Jacked up my connection to Chiang Mai no way to travel from airport to airport to make the connection...
-
Think most 3G phones will fallback to GSM and work... mine does anyways...
-
One might google "kb905474-enu-x86" to find a solution
-
Pentium M is based on a PIII which is alot better than p4 design but does not hold a candle to the A64 dual cores... 27,000 sandra cpu scores
-
-
Same Same I have 50 invites...
-
100 @1300 Baht... seem to be ok
4.7 X4 -r's
-
Thinking it was somthing like that, been doing backups which have files the size of the dvd
-
I believe DVD data disks must use the UDF packet format, too large for the other formats I believe. Anyways nero makes you use it...
-
I put a NEC-6500 internal dual layer burner in my laptop, newer laptops have universal drive bays....
-
More a contention issue than packet shaping 100K people on 1.5Gbps is horrible...
-
Never hook a Laser printer to a UPS either because it basicly has a heater in it which pulls scary power instantly...
-
Best way is to use norton ghost... it will transfer partition to the new drive...
-
Pentum-m much better than the P4 core based celeron
-
get a ADSL Modem/Router box from pantip.... then you can choose which port goes to which computer through the nat on the router...
-
Portable redneck entertainment center...
-
Or get the Ace mega codec pack... has every known codec included...
-
Hi Uncle,
The two Router/Hubs will only work if your modem has a LAN interface not a USB interface as most modems are. You do not necessarily need a uplink port to cascade hubs you just need a crossover cable which swaps the TX and RX pairs same cable if you were connecting two computers directly together. If you already have a Hub and your modem is USB based I suggest you get a SMC7901BRA if you do not have a hub you should get the SMC7904BRA. The SMC's have wizards that configure the router for just about any location. I've been running the 7901 with True with no problems. Can't remeber exact the price but the 7901 is around 3K at pantip. If your modem does have a lan port the SMC7004VBR will do the job.
Happy
Good Luck
-
Nforce4 Motherboards have a hardware firewall built into the Network Interface...
-
POP3 works for me... sometimes very slow..
-
Does that with me at home but not at work... strange...
-
I have Gmail invites if you want to go that route, it supports POP directly...
-
1997 Camaro SS 30th Annv 6 Spd Ram AIr
1966 Chevelle L78 396 4 Spd
-
I would use at least 6 AWG as this also could be conducting lightning surges which can be quite alot of current...
Best alternative to iPad?
in IT and Computers
Posted
We have about 30 LG Gpad 8.3's at work... not sure what's available in LOS but most 1st tier brands should work good...