TommyL727

Okay so it was my own stupid fault. I managed not get the serial number copied correct. Working now!!! 😵

Hi again! I have tried everything but just cant get it to work. Copied the serial number, but it wont make a connection. Do you think you need to be in bridge mode before this is possible? Did you do it yourself or did 3BB had to do it? Is it as simple as switching mode from use vlan to not use vlan in the menus? I use VLAN 10 as stated on the router info page. This is correct right? I read somewhere they use VLAN 33...idk I see there is some parameters like ONT ID and ONT Reg status. Do they have to match, or will they auto match when connected you think? I managed to get the PPPOE details from 3BB, and following the opnsense guides and filled all in. But its just not working. Anything I might have missed? Here is all my info from the router (i replaced the ip adresses with x): 1_TR069_INTERNET_R_VID_10 Connected X:X:X:X 10/0 Always On MAC Address: xx:xx:xx:xx:xx VLAN: 10 Policy: Use the specified value Priority: 0 NAT: Enable IP Acquisition Mode: PPPoE IP Address/Subnet Mask: x.x.x.x/255.255.255.255 Gateway: x.x.x.x DNS Servers: 110.164.252.222,110.164.252.223 BRAS Name: CBIBS07 Device Type: HG8045X6-12 Description: OptiXstar HG8045X6-12 GPON Terminal (CLASS B+/PRODUCT ID:2150088941HYR5039987) Hardware Version: 381D.D Software Version: V5R022C00S148 Software sub-version: 1.0 Manufacture Info: 2150088941HYR5039987.C402 ONT Registration Status: O5(Operation state) ONT ID: 35 Tommy

Im not following…wpa? The user end doesnt need any setup. If it supports the wpa type it just uses that automatically…ive never had to setup both ends. Maybe Im misunderstanding.

Are you talking about wpa2 vs wpa3? I needed to change it myself to wpa3 because the installer had it set to wpa2… you can have wifi 6 or wifi 7 with both…so security doesnt really have anything to do with wifi version. It has to do with what wpa type you use. If you log in to your router you can probably change it there.

I guess you are right. Probably not gonna use it as long as I have a public IPv4 anyway. Case closed for now 😃

I called them and asked if they could remove me from CG-NAT because apparently I have some cameras that needed access from the outside…which I may or may not have 😬 I didnt mention anything about my servers as i have no clue about their policies regarding that. Its not fixed, only dynamic public. I use dyndns in opnsense so it doesnt matter that much to me. They did not say anything about extra payment.

So today i made 3BB remove me from behind CG-NAT, and I got a public IPv4. So far so good. But in the process they removed my IPv6 allocation, it’s not there in the router anymore, empty. 🤔 Can I not have both? Anyone experienced this?

If other people in the village wants internet over that cable, they should split the cost with you, right? 🤔

Ah, I couldn’t read the pdf due to not being logged in before. Great stuff, thanks a lot!! 👍 I will give it a go. Just moved here, and I need my OpnSense….🙂 rgds Tommy

I’m trying to replace my HG8145x6 router from 3BB with a converter…just wondering if it was plug and play? No serial number transfer needed? How about pppoe…did you need to set a user / passwd in the Asus router? Any help would be appreciated. regards Tommy