professor21

Thanks! So the cheapest way to get a 1 month visa is to go to Savannakhet Laos and come back to BKK for a visa on arrival or Phnom Penh by bus?

Thanks!!! So I would need to take a bus to Laos and I could get a 6month for 2000BHT?

thanks what is the cheapest 3month or 6month visa? I could get a teaching job here in English or music or maybe mathematics

I think one unit is 330W/hour so 660W for 2 units the business electric is lower 0.03/KWH but I don't have the capital to start a business here

well yes I may have been robbed by this austrian IT guy, they are saying the s3+ costs 330w an hour, but he seemed to be running them for several days from his Leaf condo on Sukhumvit

I'm showing a profit of 21.73/month he was claiming a profit of 70-80USD a month but that is before electric fees of 0.1USD/Kwh

this guy who sold me his bit coin miners were running them it seems 24 hours a day from his Leaf condo, I don't know how he was turning a profit with the electric costs?

if I go to poipet then can I get a cheap visa? I can't afford 1900bht and I just got a US visa on arrival, I noticed there are buses to Phnom Penh but I don't know if there is a direct bus to poipet

I have a US visa on arrival, where is the best place to get a renewal?

do any rentals offer free electric? I'm trying to run computer hardware at 750W or 1500W for 2 units 24/7 or I could try to do it from a hostel?

and it was just a waste to go to zeer to pay 1700BHT for a messed up screen. I could have gotten the same price at Pantip, but the guy at Zeer was the last one open and said to call him for issues but he didn't reply yet

I really don't like the long term quality of the hp dm4, the touchpad has failed too and the speed even with 6gb is slow for internet, the screen mounts also are damaged and aren't durable. and it runs really hot, I think I might need to get thermal paste or a cooling pad to lengthen the life of the machine??? where do I apply the thermal paste

What is the config panel to change startup programs?

bitmain is telling me just to do a factory reset with the usb-serial and putty. by the way how much is electricity, can I find a place with free electricity? I'm paying about 6750BHT right now.

it could be true, the s5 is supposed to be lower in power consumption. I think the price of bitcoins seems to be stable at the moment

thanks!!! well I don't want to starve and need to pay rent so how do I do it myself with the raspberry serial/USB connector? this is kind of great that you can do this since many people are abandoning their antminers instead of resetting/flashing firmware.

I think I just need to figure out which pin on the serial/USB is tx, rx, and ground and then I can use Solarwinds TFTP. I have taken some courses in theoretical physics and math but mainly calculated theoretical Gaussian surfaces. I can send you the code from bitmain, I think they are selling these for much lower than I bought

I'm not sure about the paperclip everyone is telling me on the forums how fragile these machines are and not to even mess with the firmware.

there are 4 pins on the raspberry pi serial-USB cable, TX, RX, ground and I'm not sure what #4 is. Can I do the firmware restore without soldering? Or where would I get a solderer and the parts for this at a computer shop maybe?

I'm not sure what the paperclip fix does? I'm concerned it might cause a problem or electrical damage

anyways, then I'm supposed to USB to laptop and run TTFP with solarwinds and input the commands to restore the factory settings or reinstall new firmware. You have to be careful even with the units overheating and destroying itself with some sort of glitch, I also noticed when you insert the 4 4pin power connectors you have to be careful the units are powered off or you will spark and you have to be careful to insert to the 2 separate motherboards.

I'm not sure if I can get them mining off of a house wifi to router to ethernet to the s3 antminers?

I payed thaieasyelec with paypal and they had a great price on the serial-USB connector and fast delivery tomorrow hopefully....

www.ThaiEasyElec.com

so a philips amara mask might cost 7500baht?? my amara has already torn now for the 2nd time, I should have washed it every day in tap water. I'm really suffering without my oxygen and the asv I have isn't that effective.

I would not go with the s9 resmed, I'm on a philips asv, the s9 seemed to malfunction and was blasting air too quickly at a high rate of speed and I couldn't sleep on it

is there anywhere you can buy a really cheap portable oxygen concentrator like Laos, Burma, Cambodia, Vietnam?

by the way if I go to the Sukhumvit soi 33 branch of K bank or Bangkok Bank I don't need to pay the $50 fee to the US Embassy?

I think they are telling me that you insert the serial connectors into the 3 debug holes and one of the 4 connectors might be a ground. I don't want to mess it up though and then I need to USB to my laptop and enter commands through a TTFP like solarwinds or putty. They gave me 2 lines of code from bitmain to restore to factory settings and to reinstall new firmware.

yeah I got a really nice reply from bitmain. I'm not sure how to connect the raspberry USB to the controller board though? And then I need to enter some commands from my laptop to reboot or reinstall the firmware from an ip address

yeah the machine failed because I powered it off during firmware upgrade. I spent all day at Pantip and couldn't find the cable which Thaieasyelec has for a great price. I'm supposed to somehow connect to the controller board and program in the firmware reset with the 4 pin connector/serial interface

yeah it was terrible I accidentally powered off during the firmware update so the fans on the antminer won't even start now and the factory reset button didn't work. Thanks very much, I feel really sick these days!!!! I'm looking at some pools now. Thaieasyelec is a great company with great prices on the raspberry cables.

I am also looking for a router to get the miner connected to the internet, I tried to connect the miner directly through WIFI but it wasn't mining for some reason, no hashing on the GUI

yes it has a special USB to serial chip to connect to the antminer controller board and do firmware flash reset. I tried a manual reset with the button in the front but it didn't work.

I'm not sure if this was a good investment, I didn't really have the money and it feels like the bitcoin price is going to drop? it has gone down a lot in the last year...

http://www.adafruit.com/product/954

where can I get a cable please like this I need to fix the firmware in my antminer?

I was upgrading the firmware on my s3 antminer and it powered off and now the red light on the box blinks and I am getting no received info on the LAN to the s3. I can't see it on ipscanner and can't even access the control panel. I tried a push button factory reset but it didn't work?

Is there anything that could restore the software/firmware maybe a router connection with my laptop?

I don't know the right leg mount for the screen is damaged too and shows a wire. Yeah it seems like you can't really fix laptops easily like desktops which seem to last longer.

http://ark.intel.com/products/43560

By the way so the i7 620 with 6GB ram is going to be faster than buying a core 2 duo or centrino, intel M or pentium 4? I don't know I'm having speed problems on the laptop for study videos. anyway terribly exhausting trip to Rangsit and I couldn't even get a good screen there.

they were telling me prices for used computers are at least 3000BHT? is it true?