NamH2O
-
Posts
114 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Posts posted by NamH2O
-
-
Check this out on Hull Consulates web site
Latest News
Important Information about Non-Immigrant Visas
16 September 2016
With the introduction of new rules for Non-Immigrant visas, The Royal Thai Consul UK is now providing direct assistance for all categories of Non-Immigrant visa applications.
Under the new legislation, when applying for any category of Non-Immigrant visa, the Royal Thai Consul asks applicants to email all documentation for checking to the Hull Consulate, ([email protected]) who will then forward the application to the London Embassy for approval to issue.
The applicant is then informed of the decision by the London Embassy and, where approved, is invited to visit the Hull Consulate where the visa can be issued promptly. This application checking service is not available at the London Embassy, where persons posting their application to London will only learn if they will be granted multiple or single entry or even only a tourist visa on receiving their passport again.
- 1
-
-
-
I expect you are paying your agent 18 to 20k to do this application for you,the reason he want to open Bangkok or Kasokorn account for you is because he has contacts in both these Banks which makes it easy for him to do the paperwork.If you use your own Tanachart bank to prove you have the funds,he will have to knock off about 5k from his fees.He is milking you.There are other agents who will do the application for you in using your own bank.
-
Just been Vietnam to get away from Sonkran we had 2 weeks,3 to 4 days was enough in Hanoi,we took a trip to Halong Bay
http://halongfantaseacruise.com/itineraries-rates
been twice now with this company very nice both times,and a choice of itineraries.
You will have no trouble changing US $ or Thai Baht or £ sterling to VN Dong,you get a better rate at the Bank.I found it better to pay in V Dong.If you hold a uk spanish french german or italian passport you can go for 15 days Visa free,I think untill the end of June or July this year,asian passport holders get 30days on arrival.
-
If you can get a piece of timber behind the board you can screw through the board into the wood,thus spreading the load.
-
Check out these, http://gripitfixings.co.uk/new-gripit-2015/
Dont know if available here,but can buy on ebay.
-
Hi,did my first 90 day report this morning at Jomtien,only paperwork reguired was completed TM 47,usual photo copies of passport pages offerd and TM 30,but all returned by officer,said not required.
Smooth As Silk.
-
Can a Laos national get 30 day extension to SETV at Jomtien immigration.
-
This should explain all yu need to know about Gravity Feed.
The water pressure available in a gravity-tank fed system is directly related to the height of the cold water storage tank. To calculate the available pressure simply measure the distance, in metres, from the bottom of the cold water tank to the outlet of the tap or shower and multiply by 0.1 - this will calculate the pressure in bar...
for example : 0.1 bar (1.45 psi) is equal to approx one metre of height between the bottom of the water tank and the outlet of the tap or shower.
1 metre height of water = 0.1 bar
2 metre height of water = 0.2 bar
3 metre height of water = 0.3 bar
4 metre height of water = 0.4 bar
etc
in the example opposite
The shower outlet will have a water pressure of 0.1 bar
and the kitchen tap will have a water pressure of 0.5 bar
So to achieve even 1.0 bar of water pressure from gravity fed hot water systems you would need to have a cold water header tank in the loft which is 10 metres above the height of the tap you are using, clearly this is not possible in most homes.
Mains pressure: This is the pressure of the water supply entering the house measured from the stop tap. Water companies will maintain a minimum requirement of 1 bar water pressure, and a flow rate of around 9 litres per minute.
Water pressure is often confused with water flow but they are not the same. To understand the difference between water pressure and water flow click here
Help Required
in The Electrical Forum
Posted
Hi just wired new house using safe t cut CSR8E with RCBO,wired in 3 radial circuits and outlet sockets wired and fitted and udable,wiring for shower water pump wired up to 32 amp dp Isolator no mump or shower fitted as yet lighting wiring finished and all drops end taped up ready for when light fitting purchased ground spike 1.8 met fitted and connected,steel work on roof bonded back to consuner unit.Consumer unit and all circuit breakers Isolated,but the meter is showing a daly useage of 4 to 5 units?when I look ate the meter the green neon which is lit means tamper or theft see photos,also the pulse signal indicator blinks about every 10 secons.Is my work at fault or is the meter faulty ????
Any help please.
Regards
Nam