dave_boo Posted February 28, 2015 Share Posted February 28, 2015 Just curious...how much should it be front and rear? Should it be adjusted if have a pillion? Link to comment Share on other sites More sharing options...
Gweiloman Posted February 28, 2015 Share Posted February 28, 2015 Hard to say. With your generous posterior, I would suggest 40 front and 44 rear Link to comment Share on other sites More sharing options...
briley Posted February 28, 2015 Share Posted February 28, 2015 I put 35 in the front and 37 in the back - I normally carry a non-Thai pillion hence a little more than many other people.What I have found is I lose 10 psi from front and back between fills of petrol - ie about once a week.If I keep the pressure up I do not get as many punctures. 1 Link to comment Share on other sites More sharing options...
seedy Posted February 28, 2015 Share Posted February 28, 2015 One Post Removed 11) You will not post slurs, degrading or overly negative comments directed towards Thailand, specificlocations, Thai institutions such as the judicial or law enforcement system, Thai culture, Thai people orany other group on the basis of race, nationality, religion, gender or sexual orientation. Link to comment Share on other sites More sharing options...
Popular Post RubberSideDown Posted February 28, 2015 Popular Post Share Posted February 28, 2015 You need to be able to monitor pressure as you fill the tires, as well as have spares on standby- fill them up until they explode, then replace the tubes, back off 1psi, and refill. 4 Link to comment Share on other sites More sharing options...
andrewrooney Posted February 28, 2015 Share Posted February 28, 2015 My Wave has a sticker on the swingarm with the recommended pressures. Pretty sure they say 29 up front and then the back has different pressures depending on whether or not you have a pillion. I usually do 30 up front and 40 in the back because I'm a fatty. 1 Link to comment Share on other sites More sharing options...
Gweiloman Posted February 28, 2015 Share Posted February 28, 2015 You need to be able to monitor pressure as you fill the tires, as well as have spares on standby- fill them up until they explode, then replace the tubes, back off 1psi, and refill. That's rubbish. The inner tube won't explode as the outer tyre will prevent that from happening. Or won't it? Whatever it is, rubbish (my post) Link to comment Share on other sites More sharing options...
Gweiloman Posted February 28, 2015 Share Posted February 28, 2015 My Wave has a sticker on the swingarm with the recommended pressures. Pretty sure they say 29 up front and then the back has different pressures depending on whether or not you have a pillion. I usually do 30 up front and 40 in the back because I'm a fatty. Wow, what a great idea. I don't think any of my bikes have such a sticker. Anyone knows where I can purchase such stickers? Link to comment Share on other sites More sharing options...
dave_boo Posted February 28, 2015 Author Share Posted February 28, 2015 You need to be able to monitor pressure as you fill the tires, as well as have spares on standby- fill them up until they explode, then replace the tubes, back off 1psi, and refill. What if the second set has a tolerance level that is 2psi lower than the first set? Link to comment Share on other sites More sharing options...
dave_boo Posted February 28, 2015 Author Share Posted February 28, 2015 My Wave has a sticker on the swingarm with the recommended pressures. Pretty sure they say 29 up front and then the back has different pressures depending on whether or not you have a pillion. I usually do 30 up front and 40 in the back because I'm a fatty. You and your fancy book learning. Didn't anyone tell you men don't read directions? Link to comment Share on other sites More sharing options...
dave_boo Posted February 28, 2015 Author Share Posted February 28, 2015 My Wave has a sticker on the swingarm with the recommended pressures. Pretty sure they say 29 up front and then the back has different pressures depending on whether or not you have a pillion. I usually do 30 up front and 40 in the back because I'm a fatty. Wow, what a great idea. I don't think any of my bikes have such a sticker. Anyone knows where I can purchase such stickers? Probably a sign shop...same place you can get a TIS sticker to make sure your lid is legal... 1 Link to comment Share on other sites More sharing options...
Shurup Posted February 28, 2015 Share Posted February 28, 2015 You need to be able to monitor pressure as you fill the tires, as well as have spares on standby- fill them up until they explode, then replace the tubes, back off 1psi, and refill. That's rubbish. The inner tube won't explode as the outer tyre will prevent that from happening. Or won't it? Whatever it is, rubbish (my post) Jim, if you stop using a hand pump, you can pump them up as per RSD advise. Link to comment Share on other sites More sharing options...
cornishcarlos Posted February 28, 2015 Share Posted February 28, 2015 Checked mine as soon as I got home last week after a puncture repair, obviously the local mechanic uses his vast years of experience and not a pressure guage, 67 psi in the rear I normally stick 40 in both, lasts longer between fills !! 2 Link to comment Share on other sites More sharing options...
Shurup Posted February 28, 2015 Share Posted February 28, 2015 Checked mine as soon as I got home last week after a puncture repair, obviously the local mechanic uses his vast years of experience and not a pressure guage, 67 psi in the rear I normally stick 40 in both, lasts longer between fills !! Just as I said earlier! It's weird though, can't see my earlier reply. Link to comment Share on other sites More sharing options...
RubberSideDown Posted February 28, 2015 Share Posted February 28, 2015 You need to be able to monitor pressure as you fill the tires, as well as have spares on standby- fill them up until they explode, then replace the tubes, back off 1psi, and refill. That's rubbish. The inner tube won't explode as the outer tyre will prevent that from happening. Or won't it? Whatever it is, rubbish (my post) You obviously lack my vast tire-exploding experience, but I've read you're just a noob, Jim... There's only ONE thing that will prevent the tire from exploding at 73psi (yes, I've blown up enough tires to know the limit), and that's a new sticker that increases the limit- since changing to a '100psi max load' sticker, I haven't had a single problem. Link to comment Share on other sites More sharing options...
dave_boo Posted February 28, 2015 Author Share Posted February 28, 2015 Checked mine as soon as I got home last week after a puncture repair, obviously the local mechanic uses his vast years of experience and not a pressure guage, 67 psi in the rear I normally stick 40 in both, lasts longer between fills !! Just as I said earlier! It's weird though, can't see my earlier reply. Must be a bug...I've lost a reply or two the last week. Link to comment Share on other sites More sharing options...
Gweiloman Posted February 28, 2015 Share Posted February 28, 2015 You need to be able to monitor pressure as you fill the tires, as well as have spares on standby- fill them up until they explode, then replace the tubes, back off 1psi, and refill. What if the second set has a tolerance level that is 2psi lower than the first set? No problem, put on a another spare, rinse and repeat Link to comment Share on other sites More sharing options...
dave_boo Posted February 28, 2015 Author Share Posted February 28, 2015 You need to be able to monitor pressure as you fill the tires, as well as have spares on standby- fill them up until they explode, then replace the tubes, back off 1psi, and refill. What if the second set has a tolerance level that is 2psi lower than the first set? No problem, put on a another spare, rinse and repeat My cat flips when I run a vacuum...what's gonna happen when every 20 minutes or so I blow out a tyre? Is that animal cruelty? If he dies, can I still trade him for a bucket? Or is a corpse only worth a glass? Link to comment Share on other sites More sharing options...
AllanB Posted February 28, 2015 Share Posted February 28, 2015 If you are getting it done from a roadside shop for 5 baht they will pump them up until they feel right, meaning rock hard, just keep a pressure gauge under the seat and back them off to whatever is says in the handbook, also kept under the seat. No chance of the tube exploding as that means the tyre too, these guys are not fools they do this 100 times a day on Wave and also their compressors don't run that high. Link to comment Share on other sites More sharing options...
Gweiloman Posted February 28, 2015 Share Posted February 28, 2015 You need to be able to monitor pressure as you fill the tires, as well as have spares on standby- fill them up until they explode, then replace the tubes, back off 1psi, and refill. That's rubbish. The inner tube won't explode as the outer tyre will prevent that from happening. Or won't it? Whatever it is, rubbish (my post) You obviously lack my vast tire-exploding experience, but I've read you're just a noob, Jim... There's only ONE thing that will prevent the tire from exploding at 73psi (yes, I've blown up enough tires to know the limit), and that's a new sticker that increases the limit- since changing to a '100psi max load' sticker, I haven't had a single problem. Maybe so but I bet my quality outweighs your quantity (only 400k? pffft). I've been able to blow up and explode condoms with sheer lung power alone. Can't do a hot water bottle though. How is it possible that bicycle tyres can withstand higher pressures than motorsai tyres? My bike says max psi 120 Link to comment Share on other sites More sharing options...
dave_boo Posted February 28, 2015 Author Share Posted February 28, 2015 You need to be able to monitor pressure as you fill the tires, as well as have spares on standby- fill them up until they explode, then replace the tubes, back off 1psi, and refill. That's rubbish. The inner tube won't explode as the outer tyre will prevent that from happening. Or won't it? Whatever it is, rubbish (my post) You obviously lack my vast tire-exploding experience, but I've read you're just a noob, Jim... There's only ONE thing that will prevent the tire from exploding at 73psi (yes, I've blown up enough tires to know the limit), and that's a new sticker that increases the limit- since changing to a '100psi max load' sticker, I haven't had a single problem. Maybe so but I bet my quality outweighs your quantity (only 400k? pffft). I've been able to blow up and explode condoms with sheer lung power alone. Can't do a hot water bottle though. How is it possible that bicycle tyres can withstand higher pressures than motorsai tyres? My bike says max psi 120 Woah...woah...too much information there Jim-bo. Your experience with putting your lips on condoms is best shared in this forum....Gay People in Thailand 1 Link to comment Share on other sites More sharing options...
Gweiloman Posted February 28, 2015 Share Posted February 28, 2015 You need to be able to monitor pressure as you fill the tires, as well as have spares on standby- fill them up until they explode, then replace the tubes, back off 1psi, and refill. What if the second set has a tolerance level that is 2psi lower than the first set? No problem, put on a another spare, rinse and repeat My cat flips when I run a vacuum...what's gonna happen when every 20 minutes or so I blow out a tyre? Is that animal cruelty? If he dies, can I still trade him for a bucket? Or is a corpse only worth a glass? Take your cat to a taxidermist for the cure. Link to comment Share on other sites More sharing options...
H1w4yR1da Posted February 28, 2015 Share Posted February 28, 2015 There's only ONE thing that will prevent the tire from exploding at 73psi (yes, I've blown up enough tires to know the limit), and that's a new sticker that increases the limit- since changing to a '100psi max load' sticker, I haven't had a single problem.I rode my gsxr with my rear tyre with low air pressure once and the bloody thing fell off and rolled into a khlong. It did! I was fortunate to come away unscathed. Fortunately a passing motorist took pity and lent me a spare from his trunk. Imagine my surprise when it fit perfectly and I was able to ride on to Pirelli for a replacement. The guys there were well impressed. 2 Link to comment Share on other sites More sharing options...
andrewrooney Posted February 28, 2015 Share Posted February 28, 2015 My Wave has a sticker on the swingarm with the recommended pressures. Pretty sure they say 29 up front and then the back has different pressures depending on whether or not you have a pillion. I usually do 30 up front and 40 in the back because I'm a fatty. You and your fancy book learning. Didn't anyone tell you men don't read directions? You're right, my mistake. I'll take off the sticker immediately and inflate both tires to 65 psi. Actually maybe I should go ahead and change my tires for dek wan style bicycle tires (inflated in the most manly manner possible of course). 1 Link to comment Share on other sites More sharing options...
dave_boo Posted February 28, 2015 Author Share Posted February 28, 2015 My Wave has a sticker on the swingarm with the recommended pressures. Pretty sure they say 29 up front and then the back has different pressures depending on whether or not you have a pillion. I usually do 30 up front and 40 in the back because I'm a fatty. You and your fancy book learning. Didn't anyone tell you men don't read directions? You're right, my mistake. I'll take off the sticker immediately and inflate both tires to 65 psi. Actually maybe I should go ahead and change my tires for dek wan style bicycle tires (inflated in the most manly manner possible of course). That only works if you have multi-coloured spoked wheels with fake Brembo brakes. Link to comment Share on other sites More sharing options...
Gweiloman Posted February 28, 2015 Share Posted February 28, 2015 My Wave has a sticker on the swingarm with the recommended pressures. Pretty sure they say 29 up front and then the back has different pressures depending on whether or not you have a pillion. I usually do 30 up front and 40 in the back because I'm a fatty. You and your fancy book learning. Didn't anyone tell you men don't read directions? You're right, my mistake. I'll take off the sticker immediately and inflate both tires to 65 psi. Actually maybe I should go ahead and change my tires for dek wan style bicycle tires (inflated in the most manly manner possible of course). That only works if you have multi-coloured spoked wheels with fake Brembo brakes. Steel braided brake lines? I was thinking of buying one of those shower hoses from Home Pro and fitting my brake line through it to give it the appearance of steel braiding. What do you think? Link to comment Share on other sites More sharing options...
RubberSideDown Posted February 28, 2015 Share Posted February 28, 2015 There's only ONE thing that will prevent the tire from exploding at 73psi (yes, I've blown up enough tires to know the limit), and that's a new sticker that increases the limit- since changing to a '100psi max load' sticker, I haven't had a single problem.I rode my gsxr with my rear tyre with low air pressure once and the bloody thing fell off and rolled into a khlong. It did! I was fortunate to come away unscathed. Fortunately a passing motorist took pity and lent me a spare from his trunk. Imagine my surprise when it fit perfectly and I was able to ride on to Pirelli for a replacement. The guys there were well impressed. The sticker works both ways- had you put one on that had the minimum load listed at 5psi, you would have been fine. Link to comment Share on other sites More sharing options...
dave_boo Posted February 28, 2015 Author Share Posted February 28, 2015 Steel braided brake lines? I was thinking of buying one of those shower hoses from Home Pro and fitting my brake line through it to give it the appearance of steel braiding. What do you think? Tensile strength combined with resistance to oil indicates that perhaps it would work...as long as you replaced your DOT brake fluid with naam plaa. But make sure you use the second draw stuff. First draw has too many impurities and later draws do not contain as many of the essential omega 3 fatty acids. 1 Link to comment Share on other sites More sharing options...
Gweiloman Posted February 28, 2015 Share Posted February 28, 2015 There's only ONE thing that will prevent the tire from exploding at 73psi (yes, I've blown up enough tires to know the limit), and that's a new sticker that increases the limit- since changing to a '100psi max load' sticker, I haven't had a single problem.I rode my gsxr with my rear tyre with low air pressure once and the bloody thing fell off and rolled into a khlong. It did! I was fortunate to come away unscathed. Fortunately a passing motorist took pity and lent me a spare from his trunk. Imagine my surprise when it fit perfectly and I was able to ride on to Pirelli for a replacement. The guys there were well impressed. The sticker works both ways- had you put one on that had the minimum load listed at 5psi, you would have been fine. Would it work for speeds too? I would like a sticker that says 300kph max speed Link to comment Share on other sites More sharing options...
RubberSideDown Posted February 28, 2015 Share Posted February 28, 2015 ^ I know it works for horsepower, so probably. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now