ilikethai

1 hour ago, mtls2005 said:

To me it means thirty (30) days, inclusive of weekends and holidays.

 

But maybe ask MoneyGram for their definition?

 

 

Does this mean today's the 29th of October, so I have 2 more days until November 1st which this will be a new 30 calendar day so this will reset the limit?  If I were to send today $10,000 and wait till November 1st I can send another $10,000?

Lads and gents I'm very sorry.  But what is every 30 calendar days meaning. Per MoneyGram

"For most countries, you can send up to $10,000.00 per online transfer, and up to $10,000.00 every 30 calendar days. "

7 hours ago, HauptmannUK said:

The Legender is the top trim level of the Fortuner. The Fortuner is a pick-up based SUV built on the HiLux chassis (Toyota IMV chassis used by HiLux, Innova and Fortuner). I doubt it has a single component in common with the Camry - which is a vastly more sophisticated vehicle. PPVs like the Fortuner and MUX etc are designed and built for emerging markets where ride and handling is of less interest than simplicity, robustness and low production costs.  Moreover they allow the manufacturer a healthy profit margin by using the underpinnings of a low-cost pick up.  

Having said that the Fortuner is a decent enough vehicle for Thai road conditions, my issue with it is simply that its vastly overpriced for what it is.

But the Aussie import these truck based SUVs unless they switch something out?

4 hours ago, kokesaat said:

I believe what you're looking for is a product like เบสสบู่กลีเซอรีนใส

You can buy it online at https://shopee.co.th/เบสสบู่กลีเซอรีนใส-ฟองเยอะ-ทำจากน้ำมันธรรมชาติ-i.168102366.5755068618?gclid=Cj0KCQjw3f6HBhDHARIsAD_i3D974zeD9_EURnFJ5VR0maE6g40YJzsfYzW14P5yu-vQrsWs4w9QGP4aApE-EALw_wcB

 

In Udon, on Phosri Rd, just a few doors away from the Siam Commercial Bank, same side of the road, a store sells products like glycerin, fragrance, and I'm guessing soap chip/blocks.  

 

Thankyou!!!!

5 hours ago, tonray said:

How about you buy the one you like best ?

I like them all but can only afford one.  Not much help from you but thanks

Where can I buy soap chunks around Udon, Nong Khai and essan regions that are already made so I can melt them and add my own scent and perfume?  Are there any manufacturers?  I'm willing to buy a good amount. Thanks in advance 

I've been out of the car scene for decades.  I can't decide between Isuzu Mux 2021 and the current Mazda CX-9.  The Mux is latest gen but it uses the previous gen engine.  The CX 9 is old and it's going to get a total redesign.  These 2s have design language that speaks finished design and complete and reliability. Corect me if I'm wrong on things.  Should I just wait for the next generation Pejaro Sports, Fortuner and or Nissan Terra?  and Why?  My mentality is buy latest greatest everything.

On 7/1/2021 at 9:09 PM, CharlieH said:

As long as they were present in the country when the ticket was purchased from an authorised seller I dont see an issue. (happy to be corrected)

So the winning ticket is useless because it was bought outside of Thailand

2 hours ago, jomtienisgood said:

If I won 12 million I wouldn't tell anyone...????

I know right.  Very big Facebook news in the essan region

9 hours ago, CharlieH said:

As long as they were present in the country when the ticket was purchased from an authorised seller I dont see an issue. (happy to be corrected)

I understand the winning tickets were "bought in another country" outside of Thailand.  Thai lotto sold in Laos are basically illegally sold.

I understand the winning tickets were "bought in another country" outside of Thailand.  Thai lotto sold in Laos are basically illegally sold.

I've heard tourists winning the lottos "in" Thailand but never a foreigner buying Thai lottery in another country.  Here's the story, I've been arguing with my buddies, someone in Laos bought 2 Thai lottery tickets and won 12 million baht today and posted on Facebook!!! Why?! Ouch!  I know Thai lottery in Laos are illegally sold in Laos unless I'm wrong.  Anyway I pray that person gets his/her prize.

23 hours ago, Brierley said:

Check out how deep you need to go in your area to avoid iron deposits in the water, rust will shorten pump and sprinkler head life by 80%.

this is very important info!  Thank you.  So deeper is not always better right?  I was told to drill during dry season so the driller will have to drill deeper to get to the water and maintain water through out the seasons?  My Aussie friend and her Thai husband  drilled 32meters down right next to the foot of a small mountain, about 20m away.    Her water started coming out reddish brownish and when it rained it came out light muddy.

I was also told by a villager to stop drilling when water is found, check again, and drill extra 2 meters down then stop completely.  Is this true?  Does water table dry out during dry season?

Well depth and what to look for?  Away from roads?  Away from tree roots? Is deeper better?  thanks.

On 4/3/2021 at 6:04 PM, richard_smith237 said:

 

Congratulations...  I’ve alerted the media !!! 

 

Do you know why ?  because you always have done and have copied a trait of culture ?

 

Watches worn on a left hand because there is less chance of banging or damaging the watch when doing most activities with the right hand. 

you're wrong.  the knobs are on the right.  get it?

I wear a watch on my left hand.

17 hours ago, richard_smith237 said:

Curious...  why would anyone want a ‘left handed motorcycle’.... assuming the op wants the throttle switched to the left hand-side.

 

if someone’s ‘right hand’ cannot control s throttle, should they be riding at all? 

seriously, I'm not joking.  You're probably the only person that's taking me seriously or maybe not.  imagine left hand throttle.

35 minutes ago, prophet01 said:

 

 

@ilikethai

If you're neither an engineer nor architect, just a coffee drinker, on what basis are you making your decisions in respect of the proposed structural integrity of a building?

it's all about thinking and opinion ahead.  talking and talking.  all I can do is talk.

"Do you speak and understand Thai, the Issan Dialect, or Laotian language? "

It should be more like "Do you speak and understand Thai or Lao (Issan accent) language?"

Edit: I meant to say.

-25cmx25cm column size with 8 rebars 16mm diameter, 8mm ties.  (I think it's too much, I was hoping for 14mm rebars)

I'm planning to build a house with some local and visiting friends.  I have a neighbor who does house building (that's what he's said). We're not engineers nor architects.  We're just coffee drinkers.  We're just planing out and talking.  Cut to the chase.  Simple 2 story house and maybe a small living attic with a dormer.  Usually houses here are in equal grid but this is not quite the case.  See pic.  He recommends the following.

-2 story house, modern shed roof to save on cost. all blocks no bricks.

-ceiling height 1st floor 3.5m.  2nd floor 3.2m

-1.5m deep hole footing. footing size 1.5cm wide and 50cm depth. (can this be 80cm wide and 50cm deep footing?)

-25cmx25cm column size with six 16mm rebars, 8mm ties.  (I think it's too much, I was hoping for 4 rebars)

-25cm width x 40cm depth of beam with three 14mm rebars on the bottom and three 12mm rebars on top, 8mm ties.  (that's new to me, it's always been all same size rebars)

-25cm width x 30cm depth of beam for very top where roof frame is. ( would 25cm x 25cm work?  because it needs to be lighter load)

-floor slab is pre-made but will be putting on wire mesh and pour concrete on top to get 8cm thickness. (can I just lay tiles

 on without putting on the wire mesh?)

what do you think? thanks in advance.

5 hours ago, PGSan said:

If the lengths between your resits are accurate then the shape is definitely wrong.  This makes it impossible to give anything like a good estimate of what the area may be.  (The extra area from the mound not being flat probably makes little proportional difference to this estimate.)

the drawing lengths are drawn to make things easier to calculate. my question is is it even possible to calculate manually even if the lengths are not square or rectangle shape?  can I add all those lengths up and make them into 4 sides and multiple side A by side B?

ok, I'm so sorry for this long tread.  I should just had explain better.  Sorry for my bad English.  Anyway what I'm trying to achieve is total area of land with a big mound.  how would I achieve this? 

I made a basic map for ease of calculation.  It's possible to find out sqm (area) even if a land is not a square shape?  I want to hire people to clear out the woods to make a farm.  The people want me to measure as accurate as possible the total land and including the mound.

blackcab, what is the base is 200m around?