Max Brok

20 years ago it was not done to drive a car as a monk or shopping in 7 eleven and pay the bill in person. Slowly they anticipate in the real world🧐

And poei ban, they make good money with rotten cassava ore other crops

Indeed, the number of participants is that low the results can be completely different every week🧐

I bought a Sharp in the past good suction but the the motor temperature controller failed. Result a molten motor support around the motor suction inlet. I made a new one of silicon rubber and now I run only 5 minutes on the lowest speed, I am afraid it gets on fire😂. You do not want to see a running vacuum cleaner catch fire, looks like a jet motor.

Thanks for the OMNI calculator but I am sure this is not suitable for Thailand. This calculator does not take all important variables in to account. Regards, Max

I have to buy 2 airco units. One for living room and one for bed room. For a good calculation one need to know the general insulation status of the room, like glas surface, wall material and ceiling insulation. Living room is 4x8x2.6 mtr,ceiling insulated with 150 mm rockwool+alu foil, long wall outside no sun next to carport with 2 windows single darkend glass pane 4square mtr. Short wall a litlle sun in evening with single glass sliding door 8 square mtr. Other walls bedrooms and kitchen. Bedroom is 4x4 mtr ceiling insulated with 150 mm rockwool+alu foil, 1 wall litll sun in evening with 1 window single darkend glass pane 2 square mtr. Other wall No sun with 1 window single darkend glass pane 2 square mtr. Other walls inside. All walls are Q-block 8 cm double plastered. Please can someone advice me about the nessecary BTU's? And if possible the used calculations to help me in future? Great Thanks in Advance Max

One of theire strange rules of them to make it not convenient. The bank documents too.

I did already 35000 KM in Thailand and and pulled one time by a high way checkpoint. When I showed my face when opening the window I had to drive again. I never have to show my driver license in all 20 years I drive in Thailand although I have only 3 years a Thai DL.

I have made the same conclusion as you and almost the same reasons.

I have the copper line already bought I have the copper line already bought

I found this already and will consider to buy with the bimetal connectors

Thanks, this will be the best solution but now a suitable krimp tool could be the problem. Need only one time. I will look how much this will cost

Thanks for this tip

Yes

Soon I have to connect my house from the meter to the connection on the roof outside. I bought two wires copper 30 mtrs 16 square mm and half way a pole of 8 mtrs high. The wire on the roof going inside is multi core aluminium. I noticed in a technical sheet an copper aluminium connection is not allowed because corrosion. How I can connect it safe?

Cooked food is not healthy for a compost heap as far as I know.

Everyone can buy a box of 12 bottels on the street when the shop is open. only the big supermarket chains not. What a logic again.

And the source of this money?

My latest NON-O ME is issued AUGUST 2021 in The Netherlands. At that time the E-visa was not available. But it should be the choice below but as soon the extension is issued the ME is not valid anymore. Visiting or staying with family residing in Thailand (more than 60 days) VISA TYPE: Non-immigrant O Visa (90 days stay) FEE: 70 EUR for single entry (3 months validity) 175 EUR for multiple entry (1 year validity with maximum stay of 90 days per 1 entry) REQUIRED DOCUMENTS Passport Applicant's photo (pasfoto) taken within the last 6 months Declaration (download HERE ) Financial evidence eg bank statement, proof of earnings, sponsorship letter The submitted financial evidence must be able to show sufficient means of subsistence for a person to stay abroad . The recommended minimum amount is 1,000 EUR/30 days of stay in Thailand. Personal details of a family in Thailand eg Thai ID card or Thai passport, OR non-Thai passport and stay permit in Thailand Proof of accommodation in Thailand eg accommodation booking, invitation letter from family in Thailand, etc. Proof of relationship to a family in Thailand eg marriage certificate, birth certificate, adoption certificate Letter from your spouse indicating that you both are still married and your spouse acknowledges your visit to Thailand Dutch passport or Dutch resident permit Passport page(s) which contain international travel records for the past 12 months Proof of your current residency eg Dutch passport, Dutch resident permit, utility bill, etc. Picture of applicant holding the photo and info page of the applicant's passport Please see Common Mistakes for more details. Travel plan for Non-Immigrant (ONLY for multiple entries) (download HERE )

I have one in 2019 from Thai embassy in The Netherlands. You can stay one year but have to make every time a (90 days) trip to a border and come back with the ME. If you use it one time and ask for an extension for retirement or marriage one have to show up every 90 days at immigration. If you go abroad one have to buy a re-entry permit, the ME is not valid enymore.

I know. Last year I see it everyday, even my wife stopt with tamboon to tempels and monks. We do it now directly to people who need support. Only not if they have a borrowed money for a big pick up with magnesium rims.

20 years ago monks did not drive a car. Now they own one?

As far as I know the complete package documents and pictures as the first time????????

I reed your pinned AVR, that is why I liked to hear your comment. I go to request a 15/45 meter alone for my house and use the 16 square THW A line/wire and place the AVR next to my CU. Later if I get the meter in front of my house we can donate all to an other victim of the PEA???? We wait already 3 years and not want to donate 800 meters 50 Square mm THW A and 15 steel poles insulaters etc. Regards, Max

I live 400 meters from the closest elect. pole for a electric meter of PEA. We share electricity with sister of my wife and suffer together the thin line of her, 6 square mm. When someone is ironing the voltage drops to 185 Volts. So we can not run an airco. But in future the PEA will expand the poles to our house. In the time being I will use my own meter and a temporary line 400 meters 16 square mm THW(A) with an AVR 15KVa Voltage Stabilizer with Input 120V-270V Output 220V Household Automatic stabilised Tool TM-15000VA. On Aliexpress about 6000 Baht with transport costs. I will connect a 12000 BTU Daikin AC with inverter as highest consumer and a Mitsubishi 250 Watts pump. The Sharp shower heater of 3500 Watts I wisely not use. Would it possible to use my small welding equipment, it is one with inverter and use it max 120 AMPS for welding. If one give me wise advice I appreciate it very much. Improvements which will help me are also welcome