Jump to content

Wrought Iron Gates


pontious

Recommended Posts

Can you tell me why you are prepared to pay a premium

for Stainlees or mild steel from out side of Thailand?

I’m sure Thailand has plants providing high quality

SS and MS. (anyone know)

Sounds a bit of a sales ploy.

Only asking, it’s not a criticism.

sorry can't help you with the cost per, m

Link to comment
Share on other sites

Can you tell me why you are prepared to pay a premium

for Stainlees or mild steel from out side of Thailand?

I'm sure Thailand has plants providing high quality

SS and MS. (anyone know)

Sounds a bit of a sales ploy.

Only asking, it's not a criticism.

sorry can't help you with the cost per, m

Thanks for your reply.

We assumed it would be Thai- we were advised 'quality, quality,quality. ( imported from Italy)

We have a 10 x 2 metre gate requirement so Baht 70000+ seems very high to me.

I will see if anyone on the forum has purchased any and investigate 'Thai prices.

Thanks

P

Link to comment
Share on other sites

Try this place, got it off the webb, don't know if good or bad.

webb site looks good

Asia face.

First Eastern Supply Co., Ltd.

1/3 Moo 6, Pattaya City

T. Naklua, A.Banglamung

Chonburi, Thailand

20150

Phone: 66-38-370-396, 66-38-422-815

Fax: 66-38-423-537

Link to comment
Share on other sites

I can't tell you about local prices, but a while back I had a 4metre x 2 sliding gate fitted, cost 11,000 Bt including concrete base and pillars. That was in Phrae and not imported metal. They use solid metal though. I took the lowest quote after inspecting some of the man's previous work. The highest quote I had was 30,000 Bt.

was pleased with the gate but not impressed with the concrete work.

I would definitely shop around as it seems to me that you have been quoted a ridiculously high price

Link to comment
Share on other sites

I can't tell you about local prices, but a while back I had a 4metre x 2 sliding gate fitted, cost 11,000 Bt including concrete base and pillars. That was in Phrae and not imported metal. They use solid metal though. I took the lowest quote after inspecting some of the man's previous work. The highest quote I had was 30,000 Bt.

was pleased with the gate but not impressed with the concrete work.

I would definitely shop around as it seems to me that you have been quoted a ridiculously high price

Thanks you all for your advice

I did of course mean a gate of 5mx2m =70000 (not 10x2) My house is not that big!

P

Link to comment
Share on other sites

  • 15 years later...
On 10/18/2007 at 4:34 PM, pontious said:

Thanks you all for your advice

I did of course mean a gate of 5mx2m =70000 (not 10x2) My house is not that big!

P

wish my gate was that cheap !   i got quoted   300k thb. about same size.  heavy decor. Now trying to reseal the seams with whatever meterial is used at the main bar joints.  Then after; painting. 

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.



×
×
  • Create New...