Marvo Posted September 22, 2010 Share Posted September 22, 2010 (edited) Hi DIYers, Anyone know where I can get my hands on 3 pin 5A plugs and sockets for a table lamp circuit I'm putting in. The circuit will be controlled by a dimmer so I need a non-standard plug/socket for the lamps so that no big appliances get plugged into the lamp sockets and blow the dimmer. Any suggestions for a (cheap!) Thai solution as I can't find anywhere a smaller plug/socket combination available, other than standard Thai/American. Cheers, Marvo Edited September 22, 2010 by Marvo Link to comment Share on other sites More sharing options...
electau Posted September 22, 2010 Share Posted September 22, 2010 (edited) The lampsockets should be BC or ES. the flex lead to the dimmer should be 0.75/1.0 sqmm. The lead should have a 10amp plug top which plugs into an existing 10 amp socket outlet. The lampsockets are connected on the load side of the dimmer. The dimmer should not be connected to the fixed wiring controlling a 10 amp socket outlet. Edited September 22, 2010 by electau Link to comment Share on other sites More sharing options...
Crossy Posted September 23, 2010 Share Posted September 23, 2010 Electau, that's why he wants some BS546 outlets, to stop someone plugging in their welder Anyway, no I've not seen them in Thailand, plenty here in Incredible India (but they won't fit Thai back boxes). You could pick up some UK (BS1363) outlets and plugs in Malaysia (you may even be able to get BS 546 outlets there, I've never looked), again they won't fit Thai boxes. RS Thailand do supply BS 546 plugs and sockets (as well as Oz/NZ style), but the prices are scary (cheaper to go to Malaysia). Alternatively, a hunt round Chinatown or NPE (Rangsit) should net you some mains rated plug / socket pairs intended for pro audio equipment, these mounted on a plain backplate would also do the trick. Obviously, ensure that the female part is connected to the mains and that you protect the circuit with a suitably rated breaker. Something like this (from Bulgin 3A @ 250V) would be ideal. Link to comment Share on other sites More sharing options...
electau Posted September 23, 2010 Share Posted September 23, 2010 Why have the 5A plugs? Fit the dimmer as part of the light fitting and supply with a 10A lead and plug top. The dimmer is between the plug top and the light fitting. Link to comment Share on other sites More sharing options...
Crossy Posted September 23, 2010 Share Posted September 23, 2010 Why have the 5A plugs? Fit the dimmer as part of the light fitting and supply with a 10A lead and plug top. The dimmer is between the plug top and the light fitting. I think he wants to control several lights from one central dimmer, like you would in a home-theatre environment. Anyway, we should not question why he want to do it, just suggest safe means to achieve his goal Link to comment Share on other sites More sharing options...
Marvo Posted September 26, 2010 Author Share Posted September 26, 2010 Why have the 5A plugs? Fit the dimmer as part of the light fitting and supply with a 10A lead and plug top. The dimmer is between the plug top and the light fitting. I think he wants to control several lights from one central dimmer, like you would in a home-theatre environment. Anyway, we should not question why he want to do it, just suggest safe means to achieve his goal That's right. 4 lamps on the wall mounted dimmer switch. I checked RS is Thailand and OUCH! you're right, - not cheap! I think I'm going to have to wire the lamp flexes directly through a hole drilled in a blank plate on the socket facia and maybe put an in-line connector in the flex to allow disconnection. Link to comment Share on other sites More sharing options...
Crossy Posted September 26, 2010 Share Posted September 26, 2010 I think I'm going to have to wire the lamp flexes directly through a hole drilled in a blank plate on the socket facia and maybe put an in-line connector in the flex to allow disconnection. I would avoid wiring it this way. It would not be permitted under the UK regs (and probably Oz too) as a means of local isolation must be provided for any flexible cables (the plug and socket combination would do it normally) so you can quickly isolate if the cable gets damaged. An in-line connector would not meet UK regs. I would go with the miniature connectors that I showed earlier, not expensive if you got to Chinatown. I'd also include a fuse in the backplate as belt and braces. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now