GammaGlobulin

One must be strict about lighting if one hopes to attract the other gender, meaning the "right" gender, and of the right class. Here is what I mean, and such a woman is definitely for me: She's even reading, A Woman of Her Times! Lighting is far more important than most plebeians can ever know. They are satisfied with ultra-white fluorescent lights, no less. In our house, there were no fixtures for fluorescent lights, except for one above a workbench in the garage. I like soft lighting, just as I prefer soft women. What type of a woman do you imagine would be willing to sit with you under a 40-Baht florescent tube? The answer is obvious. Some here have said they prefer 8000K. Well why stop there? There must be women you can find here who enjoy 10,000K, in small bills. It's just a matter of taste. Some have it, and some do not. A petrol station is no place to relax and read or entertain guests. And a home is no place for fluorescent lighting. 6500K LED lights just do not fit the ambiance suggested by the above three images. Or, maybe I'm the only one left in this world that has just a bit of an eye for beauty, as well as a more refined aesthetic sense. I mean, it might seem that way to some, just judging by some of the commenters who would only use warm lighting under duress. Just curious too about why anyone would use lighting under duress. I never would, and so I spent a few hours today finding the least objectionable type of light bulb available in Thailand. Those Panasonic SOFT & WARM CFLs are really not so bad. SOFT & WARM...that's the way to go, Unless you want to wind up with a hard woman. But maybe that's just their taste in women. Maybe they like hard women and hard lighting, and harsh shadows, too.

Having already mentioned blackbody radiation in the OP, this is a simple and short but rather good UTUBE intro to black-body radiation. Trying to describe colors using words instead of using wavelengths of light is not very helpful. But how does temperature affect the light emitted by a black-body, for example.... Back-body radiation is usually of most interest to first-year astronomy students. But light-bulb buyers can also enjoy and benefit from learning about black-body radiation. My advice is that, before you visit HomePro to buy the LED bulbs they have for sale, first refer to the following three key equations shown in the image below: Then, watch this really nice UTUBE video. I searched through about 10 before I came upon this one: I think it's always best to be prepared before entering the shop to spend your cash. The video is very well presented and worth watching. As I mentioned, this is mostly of interest to first-year astronomy students, but it also applies to buying lightbulbs, and it's a fun video presentation, as well.

Good and detailed information about several points, including why LED bulbs dim over time. Presently, having just this morning purchased 15 of these bulbs at DoHome, the same Panasonic bulbs I have used in the past, I know pretty much what to expect. Thank you for the information.

I actually just purchased 15 Panasonic 25 Watt bulbs, the type you linked. Good deal at the price I paid. I will leave the LEDs for another day, several years in the future, no doubt. The Panasonic bulbs last a long time.

Yes. I searched also. Therefore, I will buy at the other store with the better price. I think these bulbs extinct by now. Thanks for the link.

I never worked for a theme park. However, maybe some readers here believe I work in the carnival (freak show, maybe). Anyway, good suggestion about buying one or two before buying 20 bulbs. However, I already know what the 25 watts bulb is like because I have used it since about 2015...and it's a great and reliable bulb for me. I tried, just now, to register an account with DoHome and it went through. Then ordered 20 bulbs. But, they want pre-payment which is something I never do with online purchases. So, I will try to find the same thing, maybe on Lazada. But I have not seen this bulb after searching. I will try calling the DoHome retail outlet here, and see what happens. I certainly would rather not buy 20 bulbs if I know that this product will continue to be "in-stock" for the next few years. Otherwise...I will buy more and then hoard them!

This bulb, although not LED, is still available at this store. It is not quite as efficient as an LED. The color temp is 2700K. The price is quite low compared to what I recall it selling for in the CM retail store several years ago. In the past, I purchased many. And, in fact, they do last a long time. This seems like a good buy, and a reliable product compared to the LEDs I purchased from Lazada. The price is lower than the LED bulbs.

Thank you very much...however...as stated above: I want the same "color" as the traditional tungsten filament incandescent light bulb I have been using for over six decades. If I buy a 6500K color temperature, then it would be pointless, because it would not suit my needs. I also stated that I had used the Panasonic (spiral series) in the past, and was always very happy with the Panasonic quality. I had ZERO COMPLAINTS (ZERO). The store Ban and Beyond used to carry the bulb years ago, but the store in CM no longer seems to carry Panasonic (at least when I last checked). Here is what I used to use: And I thought this bulb was... EXCELLENT...and the best I had found to replicate the tungsten filament incandescent bulb. You may not recall the old times, about 15 years ago, when the incandescent bulb was being phased out....EVERYBODY began hording bulbs in the USA...as I recall it. Above image taken from this url: https://midcenturymodernmag.com/so-i-hoard-incandescent-light-bulbs-418213a8340c Well I was not in the USA at the time, but I heard about it. I never went so far as to hoard light bulbs, because I care about energy efficiency. I was just happy when I found a bulb, the Panasonic bulb, which seemed a happy medium, meeting the requirement for a more efficient bulb, and also being somewhat OK from a color point of view. I would really prefer to find an LED which is as good as the Panasonic CFL bulb, one that is reliable as the Panasonic, yet even more energy saving than the CFL bulb.

Thank you but please check the image of the top cover (flap) of this box. This box/bulb CLEARLY states 3000K. And, 3000K is definitely not yellow. Anyway, as has been stated, this is crap, correct? So, I am just trying to find a decent solution that would not cost me USD35.00 to USD50.00 per bulb, and which meets reasonable quality criteria.

I checked Philips already, many months ago. Philips does not have the lumens I need. And, the color temp is wrong. (I need LED bulbs for ceiling sockets on high ceilings. 100-watt equivalent is not sufficient intensity.)

If, as has been stated above, the LED bulbs that I purchased are "cheap crap", then what is the alternative? GE recently sold off its interest in LED bulb manufacture to Savant. Still, one can buy the GE brand, but maybe not on Lazada. IS there a decent bulb to be had from an online store? The price of the GE bulbs are not cheap. 20 LED bulbs would cost USD680.00, at least if bought on Amazon. And that is just for a 60-watt equivalent, not a 125-watt equivalent, which is what I need.

For my purposes, I need to buy LED bulbs having a brightness of approximately 1800 lumens, which should approximately equivalent to a 125-watt incandescent light bulb (traditional tungsten filament bulb)... However, the LED bulbs that I bought through Lazada state 1850 lumens, and these seem to be quite a bit less bright than a 125-watt traditional incandescent bulb. Why, I don't know. And, it is also the case that the LED bulbs do not maintain their brightness in some cases... Again...this is only my experience with having the plastic globes fall out of several bulbs. And, I have not been able to measure the intensity/brightness of the bulbs in a quantitative way...since I do not have access to a lux meter.

Sure... I guess I must admit that we sometimes complain in life about too many small issues, when in fact... there are far, FAR more serious things, and more valid things, to complain about (maybe such as potential health issuess, etc.). However, it does become a bit frustrating trying to buy light bulbs WHEN there APPARENTLY seems to be no governing body that is responsible for doing standardized testing, or at least if there is such a body, then it has no real clout, apparently. I bought 20 bulbs. After two months of use, the globes fell off 3 of the 16 bulbs installed in the ceilings of four separate rooms. So then...what do do? Just order more from a different supplier? And then wait around to see if the globes fall off, again? And, for that matter...which supplier to order from? There are MANY! And, they are private label brands with, seemingly, no brand recognition. At least, with Panasonic, I knew what I was getting each time I bought, because Panasonic does use statistical process control, and the products they offer are reliable from one shipment to the next. Maybe light bulbs seem like a small thing. However, they are not so small in that they add a lot to the comfort of a room (at least for me). It's just a matter of being able to identify a reliable supplier...then problem solved.

In my case, I happen to have 16 ceiling sockets in four rooms (including the kitchen). I purchased 20 bulbs from Lazada from two different vendors. This turned out to be a waste of money, since the quality is just very poor. And, there is no easy way to know the quality in advance when buying online. (ALSO! How was I to know that the plastic outer "globes" covering the LEDs would start falling off when they got hot? I figure that when the bulbs became hot, then the adhesive must have deteriorated gradually, leading to the falling globes. And further, I had paid to have someone climb up to fairly high ceilings to install these defective bulbs. Total waste of money and time!)

Please be patient, and all shall be revealed in the near future (concerning the OP yet to come). This OP is strictly about difficulties in buying reliable lighting...either through Lazada, or in the local stores of CM. As I mentioned, I used to by the Panasonic bulbs...however...I think that it is possible that Panasonic has now stopped pursuing this sector. I have not seen any Panasonic bulbs in local stores for several years. I see a lot of Philips bulbs, but I do not see the color temperature I want. So, therefore, I am asking if anyone has found a decent brand name of LED bulb available on Lazada...at a very reasonable price.

I think that the problem I am experiencing arises due to poor quality from the manufacturer. I have, above, attached a photo showing the two brands I am using (3000K temp). a. The temp rating seems to be different than the actual output from the LEDs. b. The plastic globes covering the LEDs keep falling off. Fortunately, they are plastic. If they were glass, then they would be shattering as they hit the floor. c. Here is an image that might better help to visualize color temperature of a "perfect" radiator.... I am very dissatisfied with the quality I am getting by buying off Lazada. I figure there MUST be at least a few OEM manufacturers in China which also sell the same quality through private label sales.... BUT...which brand is reliable, I don't know. And, so far, it has been hit or miss (in my case, it's mostly hit AND miss).

I would not blame you for doubting my word about the freezer temperature. However, as you can see from the photo here, I actually understated the low temperature by a few degrees C. This domestic-use freezer (top compartment of my fridge) maintains negative-30 degrees C...IF I don't keep opening the door, for example to take photos of the freezer thermometer. IF I use a digital thermometer with a remote sensor connected by a wire (so that the freezer door can remain shut while monitoring the inside temperature), then the air temperature will sometimes go down to negative-50 while the freezer blower is operating. I am very happy with the low temperature because I like to keep my meat fresh. Note: I don't consider minus-30 degrees C to be especially cold. I have driven around in colder temperatures while in Quebec in the winter. Minus-48 degrees C is cold when driving around on the roads of Canada, and the snow is no longer slippery at this temperature. Sound changes, too, when it gets that cold, just due to the change in the density of the air. Cars were not made to operate in those temperatures, and even the behavior of tires changes. Driving around in those temps in Quebec, in 1972, was a real blast!

Thank you, but are these not normally used with chandeliers, or in vintage lighting where one needs to have a visible filament? For my purposes, I wish NOT to have the internal filament or LED visible. I am now using 3000K LED bulbs, however the light is still too orange, and therefore it is possible that this manufacturer has mislabeled the product. Maybe LAZADA is not the best place to shop for LED lighting?

Aesthetics is important to me, and it is not about sitting in "semi darkness", as you say. In my house, I prefer this feel: Not this feeling:

Color temperature is definitely a matter of personal preference, and I am not saying that one flavor should be suitable to all people. Until the age of 60, I have used incandescent bulbs, exclusively. This is the color temperature that I prefer, and I want to replicate this "feel" as much as possible. There are MANY different color temperatures that I have found while buying LED bulbs. I don't have a spectroscope in my home, and therefore cannot provide any quantitative data; I can only provide qualitative data from my observations during the past few years, based on the bulbs that I have purchased, thus far. (Concerning Loy Krathong lanterns: The light in the lanterns is provided by the flame of burning candles. The candle light produced by the flame is probably the most similar to that produced by tungsten incandescent light bulbs, and that is the "feel" that I wish to replicate, ie, the light from the traditional incandescent light bulb that I grew up with, and read books by.) Thank you for your reply....

Here are two examples purchased on LAZADA. Results: Plastic Globes Fall Off; Color Of Light Emitted is Not Good

Which LED Light Bulbs in Thailand Most Closely Replicate The FEEL of The Old Incandescent Bulbs? (Same Question: Fluorescent Tube Lighting?).... BULBS: I have purchased several different brands of LED bulbs. Some are better than others. But most seem way too orange, or far too much like traditional fluorescent lighting for a garage or a petrol station. I have noticed that the “Temperature” rating of the bulbs seems more of an approximation than a reliable indicator of the actual temperature of the light…. (Here, I assume that temperature means temperature in the blackbody sense of a perfect radiator, or an approximation of a perfect radiator.) Anyway, after I buy the bulbs and get them home, they are never what I had expected. The closest I got was with the CFL glass-spiral bulbs made by Panasonic, but I don’t see these for sale anymore. Now I have switched to LED, and LED is more efficient than the Panasonic CFL bulbs, but the color is not acceptable. TUBE LIGHTING: The normal type fluorescent tube lighting in most houses in Thailand is not acceptable to my taste. (This type of lighting is preferred by many people in Asia for various reasons.) Is there any tube lighting available in Thailand which can replicate the color of the Old Incandescent bulbs? (The Panasonic CFL spiral bulbs were decent, but I need tube lighting for two areas of the house.) Thank you. Note: IMHO, Paris is the City of Light(s) Thailand is not. Thailand is the city of beautiful lanterns during Loy Krathong. Note2: Re blackbody… as in the below image…. Image taken from: https://www.sciencedirect.com/topics/engineering/blackbody-radiator

Yes...the cat's meow....

The longer I live, the more obvious it becomes to me that tastes in both pizza and grammar are changing. I prefer Old School grammar, in every case. But some prefer new toppings, such as pineapple, which disgusts me. And so it is with grammar, I guess.

I recall that a friend of mine once wrote this about pronouns and pizza: The above image was taken from JSTOR, but anyone can go to this website to read the entire essay: http://www.jochnowitz.net/Essays/EverybodyLikesPizza.html Hope this helps to clarify pronoun choice and the changing face of grammar, these days.