Skip to content
View in the app

A better way to browse. Learn more.

Thailand News and Discussion Forum | ASEANNOW

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Bathroom tile grout Sealant

Featured Replies

Hi

 

I've just had my bathroom walls completely re-tiled. 

I (think) I should seal the grout, especially in the shower area.

(Various discussions on the web about if you should or should not !)

 

I've seen some TOA products (200,213, 214) but they're more general tile sealants not specific grout sealants.

 

Any tips ?

Thanks in advance !

 

 

 

 

What's below the wet room ? If it's on a concrete slab on a ground floor then do what you want. If it's sitting on wood, or in a multi-story building where water damage may occur and you have liability then you'd probably want to seal the grout and the tiles (and plan to reseal after several numbers of vigorous cleanings).

 

When I lived in the US we rebuilt the house with a 360-tiled open bathroom shower. The contractor put down vulcanized rubber, concrete, thinset, tile, grout, and sealant. I thought the whole thing was over the top, but it was all included in a set fixed price so I didn't complain. Though it definitely has outlasted the grandmother unit where the toilet leaked into the two-layer plywood subfloor and the toilet eventually fell through the rotted floor.

8 hours ago, BangkokBoyJohnny said:

I've just had my bathroom walls completely re-tiled. 

I (think) I should seal the grout, especially in the shower area.

If you need to seal the grout you used the wrong grout.

  • Author
On 10/9/2020 at 7:25 PM, RichCor said:

What's below the wet room ? If it's on a concrete slab on a ground floor then do what you want. If it's sitting on wood, or in a multi-story building where water damage may occur and you have liability then you'd probably want to seal the grout and the tiles (and plan to reseal after several numbers of vigorous cleanings).

 

When I lived in the US we rebuilt the house with a 360-tiled open bathroom shower. The contractor put down vulcanized rubber, concrete, thinset, tile, grout, and sealant. I thought the whole thing was over the top, but it was all included in a set fixed price so I didn't complain. Though it definitely has outlasted the grandmother unit where the toilet leaked into the two-layer plywood subfloor and the toilet eventually fell through the rotted floor.

It's on a concrete slab, ground floor ....

  • Author
On 10/9/2020 at 9:39 PM, sometimewoodworker said:

If you need to seal the grout you used the wrong grout.

I'm really no expert on grout, or tiles or DIY actually, just that there's a lot of articles out there saying even bathroom grout should be sealed !

7 minutes ago, BangkokBoyJohnny said:

I'm really no expert on grout, or tiles or DIY actually, just that there's a lot of articles out there saying even bathroom grout should be sealed !

grout (when done correctly) it's already a seal, post #3 says it all

5 minutes ago, BangkokBoyJohnny said:

I'm really no expert on grout, or tiles or DIY actually, just that there's a lot of articles out there saying even bathroom grout should be sealed !

I never heard about this but perhaps it is a good idea. Are there any reasons why you should not do it? Can you use the usual tile cleaning products afterwards? 

Grout sealers in my experience are a short term limited usefulness product.

If you really want a non absorbent grout then have an epoxy grout installed. 

  • Author
15 hours ago, HighPriority said:

Grout sealers in my experience are a short term limited usefulness product.

If you really want a non absorbent grout then have an epoxy grout installed. 

I think thats my best option then ....in a few years time !

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.