jabenna Posted October 16, 2012 Share Posted October 16, 2012 Hello, I've recently been given a solution to a wireless router range issue: buy EOP Adaptors to help extend my network. I'd never even heard of these before and was amazed when I learnt it sends the broadband signal down the power wires! I have had a quick look in the electrical departments in Paragon and Central World while there at the weekend and they didn't have any. Dies anyone know 1) if EOP can be used in Thailand; 2) where to get them... In guessing Fortune Mall or Pantip. Mainly want to know though about anyone's experiences. Thanks. Link to comment Share on other sites More sharing options...
kaspercat Posted October 16, 2012 Share Posted October 16, 2012 I have used them at home and work. Hey are widely available in Thailand. You can also buy them online in Thailand. Try any IT mall and you should be able to find them. One point to remember is to make sure you use them in the same phase of electric, in case you have a 3 phase electrical system. 1 Link to comment Share on other sites More sharing options...
muratremix Posted October 16, 2012 Share Posted October 16, 2012 Powerline adaptors are not so reliable. Especially if there is RFI (Radio Frequency Interference) in your electric line. You may consider investing in a HighPower wireless router or try using 5 ghz band if distance is not a problem (but several other 2.4 ghz wifi routers occupying your space is, just like my situation in mooban) Link to comment Share on other sites More sharing options...
endure Posted October 16, 2012 Share Posted October 16, 2012 PoE is nothing to do with Powerline comms. It's a method of passing power over an ethernet connection. Link to comment Share on other sites More sharing options...
muratremix Posted October 16, 2012 Share Posted October 16, 2012 PoE is nothing to do with Powerline comms. It's a method of passing power over an ethernet connection. He asks powerline, not poe. Link to comment Share on other sites More sharing options...
jabenna Posted October 16, 2012 Author Share Posted October 16, 2012 Hi, thanks for your help. I have a Billion 4 port and an Apply Time Capsule (which has 5mHz). But in the main bedroom of our condo, for some bizarre reason, the signal drops when on the bed. Move off the bed, to the side, in front, no problem. Can't move bed as impractical. The extension phone sockets (in the middle of condo so would give more even signal distribution) don't work and True/condo management won't fix them. So someone on the Apple forums mentioned using EoP. Connect the billion to the EoP socket where the bband signal does come in. Then attach the Time Capsule to another EoP in the middle of the condo - hopefully giving a better signal. Good idea or not? P.s. any idea how I'd find out if I'm on a 3-way power setup as mentioned above? Not sure even if I asked in juristic office they'd know :-/ Link to comment Share on other sites More sharing options...
CP3 Posted October 16, 2012 Share Posted October 16, 2012 They are talking about this product Link to comment Share on other sites More sharing options...
CP3 Posted October 16, 2012 Share Posted October 16, 2012 Try changing the adapter for Billion with higher gain if there is option. But if it is built-in then too bad, either you change to better router or you can use the product like home plug Link to comment Share on other sites More sharing options...
kaspercat Posted October 16, 2012 Share Posted October 16, 2012 I just walked in pantip and saw several brands. But as the previous poster said, it's not very reliable. I ended up dumping my homeplug for vdsl2 using phone lines. Link to comment Share on other sites More sharing options...
IamNotaNumber Posted October 16, 2012 Share Posted October 16, 2012 I have used Homeplugs (aka Netplugs aka Powerline aka CPL aka God knows what) quite extensively and have found them to be very good when the electrical power circuits in the building are of good quality and up to spec/norm. Needless to say this is rarely the case in Thailand, and that is likely to be the problem. The OP, or whoever advised him, is confusing this with PoE (Power over Ethernet), which is a system for delivering relatively low voltage power over ethernet cables, in order to power routers and switches etc. in places where there is no convenient mains power. Link to comment Share on other sites More sharing options...
frankold Posted October 16, 2012 Share Posted October 16, 2012 You have 2x choices. 1. A wireless repeater placed between the bedroom and wireless adsl modem. 2. Ethernet over power line. I've not had to reset mine since plugging it in 2 months ago and havent had a single problem. Go for the 500 mbps versions as the 100/200 mbps ones will be too slow for some things. Link to comment Share on other sites More sharing options...
frankold Posted October 16, 2012 Share Posted October 16, 2012 Powerline adaptors are not so reliable. Especially if there is RFI (Radio Frequency Interference) in your electric line. I think you'll find they are usually the source of RFI rather than the victim. As such people are wanting them banning in Europe and elsewhere. Link to comment Share on other sites More sharing options...
jabenna Posted October 18, 2012 Author Share Posted October 18, 2012 Thanks again for everyone's help. Going to give the EoP a try and see how it goes. Found a wireless repeater, but I assume you have to connect the repeater and the original *wired* router together via ethernet, no? I'm probably wrong haha... Link to comment Share on other sites More sharing options...
Crossy Posted October 18, 2012 Share Posted October 18, 2012 Nope ^^^, if you have a router with DD-WRT firmware flashed it can be a true repeater purely on a wireless connection, data rate is reduced to 50% but range can be significantly increased. Link to comment Share on other sites More sharing options...
frankold Posted October 22, 2012 Share Posted October 22, 2012 If it's just general web connectivity your looking for the repeater will be fine. Cisco/Linksys offer some out of the box solutions now so you won't need to worry about flashing firmware etc. For streaming HD media etc 500mbps EOP would be required. The actual bandwidth on 100/200mbps can be quite low even if only 1 room or so apart. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now