Jump to content

Damaz6052

Advanced Member
  • Posts

    553
  • Joined

  • Last visited

Posts posted by Damaz6052

  1. Hi, I read recently that the MFA had moved because of the coup. Can anyone confirm they have moved? The address is listed below.



    Thanks



    Legalization Division , 3rd floor

    Department of Consular Affairs

    Ministry of Foreign Affairs

    123 Chaeng Watthana Road

    Bangkok 10210

  2. I use firebox 2, unlimited movies, tv shows on demand, and about 400 HD channels including all of the premium skytv service from the uk, (sky sports 1,2,3 and 4 and also streams astro in HD) well worth it and much more choice and cheaper than expat TV

     

     

    Sounds good I am missing out on watching the Tour de France this year.

  3. Are you sure you mean 50 - 80 cms ? The largest PVC pipe I have bought is only 6 inches or 15.5 cm diameter. You should try a big builders merchant such as Sanchai on the bypass road and ask what industrial pipes they stock.

    That's correct, large diameter pipe. I could also use exhaust tube. Like they use on commercial kitchen extractors. It doesn't have to be PVC any pipe would do. It must be straight and light weight. A metal fabrication shop could make tube 50cm wide.

  4. That worked perfectly after along with a hammer! Bangkok Hardware sell Easy Out kits from 180 Baht FYI.

    Thanks but there's no space to weld a nut on. The bolt is a 5mm and I don't want to damage the crank.

    Grab a nut that has the ID of the OD of the allen head bolt and get it welded on......... then undo it.

    If you don't find an Easy Out, try pounding in a Torx driver slightly oversize and see if it come out with that. Those cranks should always be assembled with grease on the threads so if that was done properly, you should be able to back it out.

×
×
  • Create New...