chiangrai

Thanks all of you,

what kind of a laboratory can do the test

my doctor says to go to the government. hospital,but being sick i don't

want to wait all day.

I realize that Thyroid-s is not a treatment for fibromyalgia.

But I've read that hypothyroid is the main cause of fibromyalgia.

I would stop at the slightest hint of any of the unwanted side effects.

It would be very difficult to go to the city and stay overnight and queue

at the hospital with fibromyalgia and my little motorbike.

If after a week the thyaroid-s doesn't work  i would go to the hospitaland get theese blood tests.

I know that the tests are accurate it's the dosage that the doctors prescribe that's

hit and miss

O.k,

I appreciate what you say but......

I see even doctors online saying that the blood tests are no good.

It's such an individual thing that doctors say that the doctors are just guessing.

Even people with thyroid problems get a clear test.

I feel like trying Throid-s for a week to see if it does any good.

What harm could I do in a week

I have fibromyalgia and want to see if Thairoid-S will help but I can't understand

the recommended dose.I want to buy Tyroid-s.

On the website that sells it it says each tablet contains 38mcg of T4

and 9mcg of T3 but the recommended dose is 30-250 mg.can any body figure out how

many tablets and how many times a da should I take.;

I am 64kg weight and 52 years old.Male 5 foot five tall

I know what a lot of you will say.I should go to the hospital and get a blood test

but I've seen online that.This medicine is good for 70 percent of people with hypothyroid

and I want to try it first because it is really difficult for me to get to a hospital and wait for blood te.

Would love some advice on this one.

"MDF and OSB also works great."

Is that what you mean at about 30 seconds.

Do you mean that MDF or OSB won't shrink.

What do these and the plastics cost.

Thanks for your help.

I wish I could send a photo but I don't know how.

It's the kind where you make it and leave the base too big,

Then trim it off with the circular saw you will be using it with.

So it is set perfectly for that blade on that saw.

Don't know how this would work with metal or anything that couldn't be cut with a wood blade..

Suppose you would just have to measure it.

Is there a plastic that could be used.

I need an 8ft,5ft and a3ft.I will have to buy a sheet of something

I've never used conwood but I've used  another cement board.

That was kind of cheap and crumbly and might not last,is conwood crumbly.

If not then it sounds good

I got a circular saw last year and went on Youtube and found some

videos on it.

I made these rip fences with plywood that they recommend.

They were great for months but now they have shrunk.

I want to make new ones but don't know what to use.

Is there a material that won't shrink that would suit this job.

Why didn't the guys on Youtube mention this,they were good carpenters.

I hope this thread has not gone dead.

Any advice anyone.

Can I go to homepro and get a velux type thing for a

reasonable price.

Or should I get somehting purpose built at the wood dealers.

Should I do dormer style or not.

Can I fit it myself or do I need a carpenter.

Where do I start.What would you do.

I just had a loft bed put into our living room

but it's too hot up there.

I want to put a window in.

The roof has a  a 48 degree slope with large

concrete tiles 6mm thick on the outside.Box metal

instead of roofing timbers and thin fiber cement boards

on the inside.

I need a cheap option.What are my options.

I don't need glass but it would be nice.

I need mosquito mesh and to be able to close it when it rains.

Is there some cheap hatch method I can use.I've seen dormer

 windows done cheap here.Are there factory made Velux

windows in Thailand and how much are they.

Basic general information would be great.

I got dentures for the first time about 10 days ago.

The top set is fine but the bottom set is giving me trouble.

I have to use polident but it seems to dissapear.

If I apply it just before a meal it's fine but I will have to apply

more by the time I eat my next meal or the dentures will come loose

as I eat.

I drink a lot of coffee and chew gum maybe that's it.

I tried not chewing gum but it had no affect.Could it be the coffee.

If I went back to the dentist could he adjust them or are they fixed

permanently.

Any ideas anybody........

I got a tin of walnut wood stain and gave it one coat

and it worked perfectly.

The beauty of the bamboo is already gone.

It's had 12 coats of redwood stain on it.

I know you must be thinking why did I do that.

I reckoned that the blond bamboo would clash with all the

redwood in the room and I still think that.

But the redwood stain just won't go dark it just stays red and streaky.On the 2 other types of wood it went a beautiful rich dark tone after 3 coats.

 All I can think of doing is to put a coat of teak or mahogany stain to try and make it dark.

Is there some reason why bamboo didn't take the stain as well as wood.

I'm thinking of putting a teak stain over it.

I'm surprised nobody knows this material it's standard material for the professionals doing old world resorts

That's sound good "grollies".

What would that do.

Would it change the appearance of what's underneath

which is still blotchy.

What kind of varnish should I use.

I started painting and decorating a house a while ago and

have run into a problem.

There was some redwood window and door frames and I stained them with "redwood deck stain" and they turned out beautiful.

There was some fiberboard and I used the same stuff on that and it turned out beautiful as well.

Then there was a large vaulted ceiling lined with the thin bamboo sheeting that you see above and I tried it on that and it turned out terrible.

I don't know if you know this material.It's called "maai at Lampoon".You find it in the shops that sell bamboo and cheap wood for about 350bht per sheet.

It's great gear really cheap and gives things a  natural

look.

Anyway,I tried 3 coats of Matt redwood deck stain and it came out terrible so I gave it another 3 coats and it looked less terrible.

I've now given one patch about 12 coats,it's starting to look O.K  but not great.

When I say giving it a coat I mean with the brush not the

western way with cloth.I don't think Thai wood stain is meant for that.

Am I missing something.Do I keep giving it more coats of stain or stop and varnish or put on wood polish or something.

I'm at a loss and it's a big ceiling,anybody got any advice.

What is an average interest rate in Thailand or Europe.

That means that the savings accounts that I already have

in Thailand and Europe already do compound interest I just need to find out what the frequency  of compounding is.

Do some banks have different frequency's for different savings accounts

What about the interest rate doesn't that differ.

By any bank does that include my bank in Europe,Bangkok bank and Krung Thai Bank.

What are these accounts called.What do I ask for at the counter or look for in online banking.

I am Reading a Dave Ramsey book about personal finance

where he advises you to save money where you can get

compound interest.

He doesn't explain exactly where you can get this compound

interest.He uses some acronyms that only an American would understand,

one of them being IRA which is  highly misleading if you come from where I come from.

However,does anyone know where I can get this kind of interest either here  or

back in Europe.

I really didn't know that.I thought I had to pay for the postage back.

I'm really embarrassed to say this but I've found the problem.I had the wire that goes from the earphone jack to the subwoofer wrong way round. I had the jack that goes into the earphone going into the subwoofer and visa versa.

How frightfully embarrassing.......

It's an amazing sound out of such a small system.....

1400bht.

Thanks Guys.Sorry for the wind up.

Thanks for your help Jai Dee.

There is only one port that the system jack will go into and that's the headphone jack so it must be the right one.

Adjusting the remote volume control is when this shrill moaning sound happens.

It's weird when I play an audio and still haven't turned on the volume switch on there is sound coming out  of the speakers.There is no green light on the volume switch but if you put the speaker to your ear you can hear the audio.

Turn on the volume switch to full volume and nothing happens.The green light comes on but the volume of the audio in the speaker is really low.

Play with the volume switch and the moaning noise comes out out of the subwoffer.

In fact when you play with the volume switch when there is no audio playing the noise comes out of the subwoofer.

Can any body diagnose the problem given these symptoms.

The main thing I want to rule out is that it's not a problem with my laptop or my OP.If that's the case I can bring it to a shop that fixes speakers and not a computer repair shop.

Thanks for the help guys.Much appreciated.

I got the speaker showing in the taskbar.

I right click on it and a list comes up,

Open Volume mixer

Spatial sound(none)

Playback  devices

Recording Devices

Sounds

Trouble shooting sound problems.

Sorry but I don't have a smart phone and wouldn't know how to use it if I had I'm afraid.

There also is no speaker icon on the task bar.I tried to find it but couldn't.