A Lurker Posted August 19, 2018 Share Posted August 19, 2018 Have a teak table (mai sak) which is getting a bit faded on the finish. Just wondering if anyone can recommend a product to use for a touch up. I was told by a Thai guy to use urethane? Thanks in advance for any suggestions. Link to comment Share on other sites More sharing options...
Crossy Posted August 19, 2018 Share Posted August 19, 2018 How is is currently finished? Our teak furniture is all oiled and waxed, madam just uses regular Pledge furniture polish (which contains various oils and waxes) to maintain the finish. This includes our main dining table, always use place mats and coasters. I would not be putting poly anything on it, awful stuff. Link to comment Share on other sites More sharing options...
A Lurker Posted August 19, 2018 Author Share Posted August 19, 2018 46 minutes ago, Crossy said: How is is currently finished? Our teak furniture is all oiled and waxed, madam just uses regular Pledge furniture polish (which contains various oils and waxes) to maintain the finish. This includes our main dining table, always use place mats and coasters. I would not be putting poly anything on it, awful stuff. Thanks Crossy. I was a bit suss on the polyurethane too. Here's what the finish looks like Link to comment Share on other sites More sharing options...
Crossy Posted August 19, 2018 Share Posted August 19, 2018 It's very difficult to tell from photos, but if it's not been wrecked in the past with a varnish you should be able to recover it with teak oil and elbow grease. 1 Link to comment Share on other sites More sharing options...
Crossy Posted August 19, 2018 Share Posted August 19, 2018 1 Link to comment Share on other sites More sharing options...
A Lurker Posted August 19, 2018 Author Share Posted August 19, 2018 Beauty. Thanks Crossy. We'll get onto that. Link to comment Share on other sites More sharing options...
carlyai Posted August 19, 2018 Share Posted August 19, 2018 Yep SWMBO uses Pledge too. We had a heap of teak in Indonesia which we bought back, house furniture is nearly all teak.Unfortunately it's used mainly for putting things on. Still comes up good when the Pledge gets to it.Sent from my SM-J700F using Tapatalk 1 Link to comment Share on other sites More sharing options...
A Lurker Posted August 19, 2018 Author Share Posted August 19, 2018 41 minutes ago, carlyai said: Yep SWMBO uses Pledge too. We had a heap of teak in Indonesia which we bought back, house furniture is nearly all teak. Unfortunately it's used mainly for putting things on. Still comes up good when the Pledge gets to it. Sent from my SM-J700F using Tapatalk Lovely furniture! Link to comment Share on other sites More sharing options...
carlyai Posted August 19, 2018 Share Posted August 19, 2018 Lovely furniture!Thanks. It doesn't seem like a big deal to us as we've had it for a long time. I would have bought a heap more if I had somewhere to put it. We just went to all the teak places around and bought what we liked. When I found those 3 m tables, there were about 50 pieces all stacked against a wall, covered in cobwebs and dust. I only bought 3 but at US $ 200 per table and chairs I felt like buying more. But that was more than 20 years ago I think. Sent from my SM-J700F using Tapatalk Link to comment Share on other sites More sharing options...
sometimewoodworker Posted August 21, 2018 Share Posted August 21, 2018 (edited) On 8/19/2018 at 8:06 AM, A Lurker said: Thanks Crossy. I was a bit suss on the polyurethane too. Here's what the finish looks like As Crossy said virtually impossible to tell from the pictures you have posted what the finish is. One way to tell is find a place where you can test without it showing, then try various solvents, all will be easily available, alcohol, acetone, and AAA thinner in that order. If none of them have any effect then you probably have a polyurethane finish, so a scratch test that will flake off a bit of the plastic (polyurethane) would confirm that. If any of them work then it will be easier to advise on the best way to continue. But do stop testing if one works. Edited August 21, 2018 by sometimewoodworker 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now