Where to Buy New Brushes for Stabalisers

[carlyai]

I  have old Lioa stabalisers. They don't seem to be available in Thailand anymore ( they probably are but I can't find them).

I want to change the brushes.

Is there a specialist shop that sells brushes?  If so could I have their contact info.

[newbee2022]

14 hours ago, carlyai said:

I  have old Lioa stabalisers. They don't seem to be available in Thailand anymore ( they probably are but I can't find them).

I want to change the brushes.

Is there a specialist shop that sells brushes?  If so could I have their contact info.

What is a stabaliser? If you mean a stabiliser then you find dozens of youtube videos and places where you buy repair equipment.

[Grusa]

Looks like a simple job, if you know what you are doing, to make new brushes from carbon rod, or adapt a pair of the many many motor brushes available in hardware stores everywhere.

[Yellowtail]

"Is there a specialist shop that sells brushes?  If so could I have their contact info." No pun intended I assume...

 

If you have the old brushes, just take them down to a motor shop. Or buy oversized brushes and cut them down. They file or grind down pretty easy. 

 

 

[carlyai]

29 minutes ago, Grusa said:

Looks like a simple job, if you know what you are doing, to make new brushes from carbon rod, or adapt a pair of the many many motor brushes available in hardware stores everywhere.

Yes, can also use a carbon block cut and filed to shape. I was hoping there may be a specialist shop like there are electric motor shops and SS screw shops. 🙂

[Yellowtail]

I have used this shop probably a hundred times, always with great success. 

 

ชาลีมอเตอร์อีเล็คทริค - Google Maps

 

[VocalNeal]

Most mom and pop hardware stores have and sell brushes. Pick the closest ones and file down.

[carlyai]

 

Edited July 17 by carlyai

[carlyai]

Think this is OK.

[snowgard]

Check here: https://s.lazada.co.th/s.LV8U2?cc

 

[carlyai]

10 hours ago, snowgard said:

Check here: https://s.lazada.co.th/s.LV8U2?cc

 

That site looks good. 🙂

Think I've sorted the brushes, now need a new drive motor for the variable transformer.