.png.3b3332cc2256ad0edbc2fe9404feeef0.png.8488ab72b8bb2e508209bfe3211b6e08.png)
The Most Comfortable Motobike Seat We Designed To Suit You
-
Recently Browsing 0 members
- No registered users viewing this page.
Announcements
-
Topics
-
-
Latest posts...
-
3,197
Cheapest good weed now ? I found 350 thb/gram but not cheaper yet, any idea ?
Dense buds are the result of spending money on proper inputs at the proper time: Indoor CEA (controlled environmental agriculture) will result in the best bud morphology and density through the application of supplemental lighting. High PPFD (umol) from 800-1500 will result in the highest density bud. High light intensity lighting during bud maturation (weeks F5-F7) is paramount to dense nuggets. Without investing (electricity) in proper lighting, you can never expect dense buds. Greenhouse grows without supplemental lighting (additional HID or LED), as well as outdoor grows, will always leave you with light, airy, high leaf to calyx (flower) ratio. Very, very much like most of what you all depict in this thread. Contrary to what most non-growers think, the sun does NOT produce the same and consistent density of lighting (PPFD/umol) in outdoor/greenhouse grows to produce consistent and marketable/sellable flower as LED lighting. LED’s are far, far more efficient in the spectral bandwidth and consistent (12 hours) intensity than the sun. A good nutritional program that provides adequate P and K (Phosphorus and Potassium), especially at the critical flowering juncture - the first 3 weeks of flowering (F1-F3). An “experienced” grower will utilize crop steering techniques, predominantly precision watering during critical bud formation, re: weeks F3-F8 to minimize vegetative bolting as opposed to generative flowering, that creates denser buds. Lastly, genetics pay a large role. Sativa’s and sativa leaning hybrids, as a generalization, tend to be more elongated and leafy than Indica dominant genetics. The lack of good trimming in this country is pervasive. In the USA and Canada, leafy trimmed bud would never be accepted in the competitive market. Depending on volume, cola flower can be hand trimmed and lower flower machine trimmed. The buds in “question” in previous posts look machine trimmed, and show a common standard to what is grown in Colorado and California. Newer markets tend to start with much more leaf to calyx ratios. PGR is NOT as prevalent as you might think. It tends to be, on this forum, the knee jerk reaction to all dense looking flower. It’s totally unacceptable in markets with mandatory testing. Because cannabis is NOT tested here does not mean PGR’s are used. I have posted on this subject, having done extensive testing with PGR’s, from the ornamental horticultural market, back in the early 2000’s. Poor looking flower (sub standard) is the result of poor growing. Hard stop. And, as always, to all you cut-and-paste, AI warriors, that love to disagree and have likely NOT grown on a commercial level, I invite you to waste bandwidth and disagree with me. LOL -
98
Is Putin Truly Ready to Push the Nuclear Button? Washington calls Moscow's bluff
Us military couldnt defeat the taliban. Russia stopped US regime change in Syria. -
50
Russian driver crashes into Thai couple’s motorcycle, denies responsibility
Unlikely a 25 year old Dream is 125 cc. -
46
Visa run from Bangkok: do and don't
Don't think you will have an issue. Just one person's opinion...I would do the bounce to Cambodia as per my previous post. If flying to Udon Thani for bounce at friendship bridge that would also be good option. -
54
Visa on Arrival refused - what is the best way to re-enter Thailand?
Well they aren't, until someone decides they are. That is the problem with a system where the 'rules' are not defined, or perhaps that is the whole point of the system. -
11
This is what Brits fought for
😎 Them Brits have now taken 2nd place to pulling America’s chain. Israel runs the show now & for many years already. They (Israelis) rule Washington. Having such a good time in LOS but WW3 can end it in a heartbeat! 😁 -
-
46
Visa run from Bangkok: do and don't
Good to know. I'd be happy doing the Patttaya visa run option but just wondering about possibility of DIY without an agent if doing consecutive 60-day visa exemptions. My preference would be to go up to Isaan and cross a friendship bridge on my own. In theory, there shouldn't be a problem since they are now "unlimited" but in practice who knows. Thanks again. I'll get in touch with Tod Daniels.
-
-
Popular in The Pub
-
.thumb.jpeg.42eea318e3350459f0aaaa5460326bca.jpeg)
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now