degrub

Popcorn, instant hot water for tea/ coffee/noodles, steamed veggies, if one with convection oven option, then great extra oven space when making large number of baked food.

Abbey (road)

As it has always been, and so it shall always be….????

Have they fixed the scanning over network for the AIO units ? Use to be you had to be direct connected for scanning to work - OEM software or Irfanview.

My old hp M252dw has been a dream. Use colour about 5% of the time, so a set of large capacity toners last a year or so.

I think you need sand + gypsum to break up heavy clay soils. Sand by itself just gets swallowed up.

Suggest getting separate laser printer, auto duplex, colour or b&w . B&W is more economical than colour, but if you need colour, no choice but to buy 350 USD of toner cartridges a pop. if you need a scanner, get a standalone device if you have space. If you dont need much, the cheapest Canon LIDE scanners do well. And you can store them easily since they are light and thin. it used to be that with the HP combo units, if one part broke or was out of ink, the entire device was out of commission. Don’t know if they changed that with recent designs.

Submarine

Marcos

Uther

d'Arthur

Lancelot

Boil

Sneezy

Smoothie

Blended

Modern

Five

Richard

Pigskin

Has a tech positively identified the actual leak location with fluorescent dye to make sure it is not a mis-seated connection or o-ring or vibration induced crack ? The filling valves are a very common weep point, especially if uncapped or missing cap o-ring. They do state that if the dye is visible, the hole is too large (q&a on the Amazon listing) for the product to work. I have had rubber hoses that turned fluorescent after a few days when i could not otherwise sniff a leak. My grandfather was a commercial A/C tech and hated the stuff . Clearly, it works for some. I suspect that if you have to open the system in the future, it would have to be flushed clean to remove the residual unreacted additive in addition to the usual vacuum pump out drying and leak test. And pulling a full vacuum may dislodge the plug. just a few thoughts.

Chaps

Investgator

Simulator

Breezeway