Jump to content

islandguy

Advanced Member
  • Posts

    909
  • Joined

  • Last visited

Posts posted by islandguy

  1. I had a similar intention and situation. I was very insistent on getting the stairs to have the width and rise the way I wanted (at the advice of a knowledgeable developer friend) and it was a challenge. I am also tall with long feet. When they finished it was almost but not quite tall enough at the the beam where the landing ends and first steps begin. The answer was to round the side of the beam (concrete beam with plaster coat) on the side where you are coming down. In this case that was enough to make a difference and pretty much eliminate the risk of hitting my head, partly because it was already close and partly because coming down your head starts higher as you are coming down to the beam. This build was supervised by a structural engineer who built everything very strongly, and he assured me that this rounding would not affect the strength of the beam adversely (plenty of big rebar in there). Getting the stairs to have a wide step and lower rise and using hardwood for the steps ended up making it one of the more beautiful parts of the house, very happy with it.

     

    It’s hard to tell from the picture, but in the close up of the beam the side on the left  has a 90 degree profile and the side on the left is curved.

    image.jpg

    image.jpg

    • Love It 1
  2. How about a battery without solar as a power backup? And  can you keep everything on existing circuits and just reduce load? Or do you need to hook up batteries to only the essential parts of the system? My essentials would a water system (well pump and house pump) two refrigerators and a couple of floor fans.

  3. On 7/31/2022 at 5:20 PM, Boomer6969 said:

    You don't need anyone to cut them, that's a piece of cake. To remove the Rhizomes or Clumps you'll need one of these.

     

    Screen Shot 2022-07-31 at 17.18.20.png

     

    I removed about 12 Sqm of clumps last tear, had to go 40cm deep as it was all like solid wood to that depth. An axe would work too but depends on the surroundings and your skills. I used both but I started using these tools in my childhood.

    Did you grow up using an o’o?

  4. On 4/19/2022 at 11:48 AM, Eric Loh said:

    Lay off the coconut milk used as a syrup for the mango and sticky rice and you be ok. Coconut milk is high in fat and harmful to your blood sugar levels. The Glycemic index for coconut milk is 70 and above which is the highest index range and extremely high sugar level. 

    Unsweetened coconut milk, not the mango sticky rice dish, can be fine for diabetics. Explained here:

    https://www.beatdiabetesapp.in/is-coconut-milk-good-for-diabetics-5-benefits-daily-limits/

  5. The last few years my champaka trees have been attacked by something every winter. I’ve tried opening up the trees for more air, cutting back dying branches, wood vinegar, some microbial sprays, hosing down the white fluff, and some some good for everything enzyme/hormone type of products. Looks like whitefly to me, and I’ve looked for ants going up and and down the trunks. Some, but no obvious ant highways. Although I haven’t seen any flying insects the swiftlets circle over the trees eating something when it is at it’s worst. Can anybody help to identify the pest or offer some more things to try? I would be willing to do a severe pruning, but it hasn’t been my first choice. Upper branches still look good. Thanks for any help.

    50DE4D05-948E-40CD-B267-255071AAB199.jpeg

    B013608A-C2D3-45FA-A8FE-D43762D08748.jpeg

    BDF71E0F-BA76-4ED8-8E41-C67F28840D97.jpeg

×
×
  • Create New...