dagling

I can forward you all my replica watch spam I get in my mailbox

Cheers mate, you ar a true friend

Does anyone know where in Bangkok / Pattaya you can buy quality Replica Watches, I had been wanting a OMEGA Planet Ocean 45.5mm Chrono Black, and preferably one with blue dark blue dial, but it must be real quality time with Vajjux 7750 movements, and that is 45.5 mm.

Here is a link to watch.

Will do

Congratulations!

Welcome on board to to the MU-7 and its 3.0!

Sorry for the delay in this post.

I ordered the Isuzu MU-7 3.0L Racechip (not the 'Pro' version), that matches the 163PS and 333Nm specs of our SUVs. I was thrown off by the '2982Cm(*3)' spec, so I wrote to RaceChip to verify that this was indeed the correct RaceChip cable for our (what is spec'ed to be) 2999Cm(*3). They responded by telling me to 'select the Racechip that corresponds to my vehicle'.

So if I understand you correctly, it`s the 2999Cm(*3) I have to go for, NOT the 163PS and 333Nm specs one?

But why did they want you to go for the Pro version, beside from selling you a more expensive one? It`s only going to give another 4% comparing to the standard one?

Nope....everything is exactly the opposite as you understand it:

The mfg. lists our engines to be 2999Cm(*3) - 163PS - 333Nm. But since the RaceChip company lists their 163PS - 333Nm chip to be (only) 2982Cm(*3), this is the one I bought.

No one wanted me to go for the Pro version, but I agree with you 100% that the Pro version only gives another 4% compared to the standard one, that's why I bought the standard version. Some enthusiasts want every last ounce of power as they can get - regardless the cost. I suspect the Pro version is marketed to them.

See what you think after reading the other MU-7 RaceChip owner experiences. Have you ordered yours yet?

No, but I sure will any day now. Thank you for clear things up for me, then I will go for the 2982Cm(*3). I have send them a email regarding shipping cost to Norway ( I`m going back for couple of months during the summer time), so hopefully the offer a free shipping to Norway as well as Sweden... Cheers mate;-)))

Congratulations!

Welcome on board to to the MU-7 and its 3.0!

Sorry for the delay in this post.

I ordered the Isuzu MU-7 3.0L Racechip (not the 'Pro' version), that matches the 163PS and 333Nm specs of our SUVs. I was thrown off by the '2982Cm(*3)' spec, so I wrote to RaceChip to verify that this was indeed the correct RaceChip cable for our (what is spec'ed to be) 2999Cm(*3). They responded by telling me to 'select the Racechip that corresponds to my vehicle'.

So if I understand you correctly, it`s the 2999Cm(*3) I have to go for, NOT the 163PS and 333Nm specs one?

But why did they want you to go for the Pro version, beside from selling you a more expensive one? It`s only going to give another 4% comparing to the standard one?

Someone must know something about this?

Racechip.de has two different chip for Isuzu MU7, so I'm not sure which of them fits my car?

Another question is whether it responds to book Race Chip Pro, which I see only provides 4% more power, and that cost 100 Euros more than the standard Race Chip?

Someone with experience with this chip in a MU7?

Hope someone can direct me a little bit here;-)

Take the new Ranger for a test drive then stop at Toyota, park next to the old Vigo and do a comparison, you'll make your decision in seconds!

A very godd idea... I might just do that later to day if I have the time...

Where have seen an orange one available for sale now as there are a hell of lot that have them on order and been waiting over 4 months??

Do not want to comment on where the car is, as I have not decided which car I'm going to buy. Hope you understand this?

Have been looking on some new pickup`s today, and have found 2 cars of interest that I do not need to wait for, can be purchased tomorrow.

One is a black Toyota Hilux Vigo Champ (top model with automatic and 4x4), and the other an orange Ford Ranger 2.2 TDCi 4x4 T6.

Do not really want a white or black car, but perhaps this orange color to Ford will fall more in flavor with time, I think it is not daunting but perhaps a bit "unusual", ha ha ha.

Some felt certain that Toyota was the way to go, then it is more easily sold and have a higher resale value than Ford, and that it meant it was difficult to sell the Ford with such an orange color when the time came.

Since there are long waits at both of these cars, I must go for a quick decision before they are sold.

So, what is your opinion?

You should start your own forum. Or you and the other bloke could just Skype one another!

You are so <deleted>.king funny mate If you have nothing useful to contribute in this thread, so keep your fingers away from the keyboard so that people do not have to read your idiotic posts.

Great video, I like it... Hinos rock...

Some other riders out there with a Kawasaki W650? Would be nice to hear from you...

Can someone explain a little bit closer? See there are several CB400 for sale, but is there a big difference between a CB400 1998 or a 2004 model? What is the difference between the V-Tec engines (V-Tec 1, 2, 3)?

What about quality on engines, solid and bulletproof? Overall quality of a Honda CB400?

Look around here on this forum there was someone who imported a enfield from India in parts but cannot remember his name.

I would sure like to read about that, anyone know about this topic?

Importation of a used bike and used parts is not legal.

This can not be true? If I order a second hand gas tank on Ebay, its not legal???

Does anyone know what you have to pay in import tax of a motorcycle that will be brought in to Thailand in parts from another Asian country?

Do I need to have a registrar company in Thailand for doing this?

The bike I want to import is a Norton 16H 1943, 500cc. 100% restored and in mint condition. How much do you think a bike like this is worth in Thailand? The bayer in Thailand will have the bike with Invoice and tax paper, Greenbook can be arranged.

6 months to make a tank???

Ok, I will ask again then: Is there anyone who sells such a tank here in Thailand, or shops that specialize in the construction of the Cafe Racers?

I had this tank built for a cafe style bike based on a Honda GB400, cost was about THB 4000-5000.

Most bike shops that do major rebuilds will be able to organise one for you.

Really nice tank. Can you give me a link or a phone number? Where did you have it built?

Have been thinking of building me a Cafe racer out of a Yamaha SR400 or SR500. Have been looking around on the net here in Thailand looking for the right tank, my personal favorite tank for a Cafe Racer is a Norton tank (see picture).

Is there anyone who sells such a tank here in Thailand, or shops that specialize in the construction of the Cafe Racers?

If it exists, any idea what it costs?

Do you know which size you need? The hook wrench that comes with the Kawasaki EX650 and KLE650 is R37.5 size.

If you're looking for a hook wrench to adjust the shocks on your retro Kwacker (W800?) I rather suspect they require a hook wrench with a smaller diameter...

I am going to do a Bevel gear backlash adjustment on my W650.

PM me your post address and I'll send you one free. I got one with my ER6, and just got another one with a replacement shock I bought. Don't need two.

Cheers TongueThaied I will You have a BIG heart mate...

Where to bay a hook wrench?

Try Chinatown. There is a round-about just west of Hua Lampong station. There are loads of shops in this area. Best of Luck.

Br

Your first link was the same company I called, they needed to order them from Germany, and you last link is not to tires shops...

I called a shop in Bangkok (Pirelli) ut they say they have to order tyres in from Germany??? Two months? <deleted>... I need 100/90/19 in front and 130/80/18 rear.

Google can be a good friend, but only sometimes.

http://www.motorcycl...p?showtopic=734

http://automotive.zi...res/th/25659753

Try Chinatown. There is a round-about just west of Hua Lampong station. There are loads of shops in this area. Best of Luck.

Brian

I called a shop in Bangkok (Pirelli) ut they say they have to order tyres in from Germany??? Two months? <deleted>... I need 100/90/19 in front and 130/80/18 rear.