chang35baht Posted January 4, 2009 Share Posted January 4, 2009 Hi guys. The seal on one of our refrigerator doors has begun to break away from the door. Now the door won`t close properly. The rubber seal itself is still in good condition, so basically I`m just after suggestions as to what adhesive would be best to stick the seal back onto the door. Any suggestions welcome,especially humourous ones. Thanks in advance, Chang35baht. P.S. Moderators feel free to move this to the relevant forum if I`m in the wrong one Link to comment Share on other sites More sharing options...
GungaDin Posted January 4, 2009 Share Posted January 4, 2009 I'm in the same boat. Where do you buy replacement door seals? Easily done in de West. Help!!! Link to comment Share on other sites More sharing options...
dumball Posted January 4, 2009 Share Posted January 4, 2009 I use 'UHU' for many purposes , just ensure surfaces are REALY clean and follow the instructions on the box which is yellow with black writing , sold in 7/11 stores . Gungadin , try contacting a factory dealer , they should be able to obtain one from the manufacturer , make sure you give them exact details of make/model/model number etc off of the plate on the rear of the fridge . Good hunting Link to comment Share on other sites More sharing options...
GungaDin Posted January 4, 2009 Share Posted January 4, 2009 Thanks Dumball. I haven't opened the door for four years, so I'm assuming the seal has gone the same way as my M&S boxer's elastic I do have a litre of vanilla spray to deal with the internals. Link to comment Share on other sites More sharing options...
garyh Posted January 4, 2009 Share Posted January 4, 2009 If you want to PM me I may be able to help with good quality seals just depends on what model you have. Gary Link to comment Share on other sites More sharing options...
GungaDin Posted January 4, 2009 Share Posted January 4, 2009 Thanks Gary. I won't see the fridge until the 17th of Jan. Link to comment Share on other sites More sharing options...
dotcom Posted January 4, 2009 Share Posted January 4, 2009 I got mine done by the GE service center place which is very near your home. I can get the number if you need it. Link to comment Share on other sites More sharing options...
Crossy Posted January 4, 2009 Share Posted January 4, 2009 I won't see the fridge until the 17th of Jan. If it's been shut for four years you'll be needing your bio-hazard suit even if it's been empty (you did empty it didn't you?). Always best to prop the door open a tad to keep the air circulating. Link to comment Share on other sites More sharing options...
GungaDin Posted January 4, 2009 Share Posted January 4, 2009 ^^^^^^ Yes & I have the suit. It was ajar, but some dimwit shut it. Link to comment Share on other sites More sharing options...
Scott Posted January 4, 2009 Share Posted January 4, 2009 What do you mean, 'some dimwit shut it'? Most of us would naturally close an open refrigerator door! (Just having a bit of fun). I too need a new seal for my refrigerator door. My plan was to buy a new one! Link to comment Share on other sites More sharing options...
GungaDin Posted February 16, 2009 Share Posted February 16, 2009 Well, after 4.5 years I opened the fridge door yesdy. No smell and the door seal is still good. It will take 10 minutes to have the external cleaned up from the bkk black soot. + 10 minutes with the vanilla spray for the internals. A Toshiba. Amazing ! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now