fareastguy Posted September 27, 2012 Share Posted September 27, 2012 Are their any engineers out there who can cast some light to this problem... Saeco Odea Go Automatic coffee machine Top & bottom red indicator lights flashing Problem: When I power on my machine from cold it indicates a flashing green light as normal in heat up mode, after about 30 seconds both top & bottom red indicator lights flash alternately & nothing else happens. Saeco Odea Go self analysis checks performed: Hold steam button in & turn on power, when all lights flash anti-clockwise release steam button 1) Turn dial fully right position press steam button, brew group operates & top LED light flashes dregs draw (brew position) 2) Turn dial middle position press steam button, brew group operates & bottom LED light flashes descale warning (home position) 3) Turn dial fully left position press steam button grinder operates. 4) Turn dial fully right position press coffee button, pump blips/runs for 1 second only & stops 5) Turn dial fully right position hold coffee button & open steam knob pump runs & delivers cold water from steam nozzle. 6) Turn dial middle position press/hold coffee button nothing happens 7) Turn dial fully left position press/hold coffee button nothing happens I have removed & fully cleaned the brew group, removed & cleaned the filter plate checked all moving parts are free to move. I have opened & checked that the gearwheels are properly aligned (as per manual) & the single micro switch is located on the pins. Replaced the brew group. When powered back on I get the same indication as before. Boncafe has a service centre in Bkk & Hua Hin but i'm in between so it means a 2 hour trip in either direction to drop off & pick up after repair, I would rather try to solve the problem myself & order the parts to be delivered to me so I can replace them at home.. Any advice is welcome Regards Link to comment Share on other sites More sharing options...
metisdead Posted September 27, 2012 Share Posted September 27, 2012 Please do not cross post this same topic across multiple forums. CLOSED. Link to comment Share on other sites More sharing options...
Recommended Posts