Skip to content
View in the app

A better way to browse. Learn more.

Thailand News and Discussion Forum | ASEANNOW

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

How Can Get More Wifi Bandwidth With Chrome/linux?

Featured Replies

Help please, my housemates are sucking up the wifi bandwidth with gaming and livestreaming (Thai) TV.

Any tips as to how to increase my share?

Using Chrome, Lubuntu 13.04, i7-3610 QM processor, ssd with 8Gb RAM.

Thanks in advance

If your router has QoS filtering you can prioritise according to type of traffic or by MAC address.

Your housemates won't be happy though. Guess you can just blame the ISP. If they don't believe you, you can point to all the posts on this forum.

unfortunately QoS on home routers sucks most of the time, if you have the opportunity to use a real linux box as a router then fq_codel is what you need.

If you share a router it will not be easy.. Would it be very expensive for you to get your own router and secure it with a password?

  • Author

Thanks for the suggestions. Unfortunately the best option - ditching the housemates - not on (at present...).

Linux users might like to read on. Searching to improve wifi speed, I found this thread http://forums.linuxmint.com/viewtopic.php?f=42&t=47766

Opened a terminal and typed in [~$] iwconfig

looking at the output, it gave a clue for improvement so typed in [~$] sudo leafpad /etc/rc.local

then altered the document by adding the line: iwconfig wlan0 rate 54M

as per the thread. Seems (???) to have improved speed.

Another tool (for linux) is iftop ([~$] sudo apt-get install iftop), which is available in synaptic package manager.

Designed to let the user see who/what is logged into the network, and how much these commensals/parasites are sucking up.

I can bring up the interface, but it is static, must be missing a few dependencies... sigh. AA

if your chipset and your AP are wireless-N capable then you're just reducing speed here. the kernel (using minstrel rate control algorithm) should handle this just fine for you, automagically. as a side note, adding the command to rc.local is not enough, you have to actually run it or you have to reboot. anyway, this won't solve you're problem. one thing came to mind that you could do: dns poisoning them so they can't reach their games servers or streaming sites but that's a bit rude. i could post some tricks to reduce latency and bufferbloat if you want but again, it won't solve the actual problem, you need to do something at the router level.

What router are you using? I have had some luck with a certain tomato firmware mod on a Linksys WRT54GL. This mod will sit on other routers and the QoS settings were perfected for a 400 apartment block. I have applied it to the main router in an 18 apartment block and every user has reported a better experience overall. The users tend to YouTube, Skype and general surf with a little torrenting thrown in.

If you are interested then I can let you know the exact name and release number of the mod and give you a link.

if your chipset and your AP are wireless-N capable then you're just reducing speed here. the kernel (using minstrel rate control algorithm) should handle this just fine for you, automagically. as a side note, adding the command to rc.local is not enough, you have to actually run it or you have to reboot. anyway, this won't solve you're problem. one thing came to mind that you could do: dns poisoning them so they can't reach their games servers or streaming sites but that's a bit rude. i could post some tricks to reduce latency and bufferbloat if you want but again, it won't solve the actual problem, you need to do something at the router level.

unfortunately there is sometimes a problem with linux wireless-n support and in some cases disabling N and reducing it to G only results in substantially better performance. It's been a problem for years and I don't know when, or if, it will ever be completely handled.

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.