Maybole Posted July 25, 2016 Share Posted July 25, 2016 I have just bought a an Epson Expression XP-235 all-in-one printer and cannot get it to connect wirelessly with my laptop. I have tried it from the disc supplied, then uninstalled that and tried using drivers downloaded from the Epson support site. I have successfully connected it via USB cable and then tried to change the connection method. Nothing has worked. Can any expert advise me ? Link to comment Share on other sites More sharing options...
thai3 Posted July 26, 2016 Share Posted July 26, 2016 use a USB cable wi fi is not worth the hassle, but if determined a search on youtube might help Link to comment Share on other sites More sharing options...
dddave Posted July 26, 2016 Share Posted July 26, 2016 https://www.youtube.com/watch?v=AY12OFyaer4... Several other YT videos on the subject. Link to comment Share on other sites More sharing options...
JohnC Posted July 26, 2016 Share Posted July 26, 2016 Have a look at downloading Epsons iprint app Link to comment Share on other sites More sharing options...
WhizBang Posted July 26, 2016 Share Posted July 26, 2016 Agree with thai3 above. Get a USB cable and forget wifi. Link to comment Share on other sites More sharing options...
gandalf12 Posted July 26, 2016 Share Posted July 26, 2016 You will need the printers IP address to set it up. It is not a straight forward thing to do though. Link to comment Share on other sites More sharing options...
wpcoe Posted July 27, 2016 Share Posted July 27, 2016 I currently have a Canon WiFi printer, but used to have an Epson WiFi printer. Both of them automatically connected to my home network during the initial set-up process. But, that said, I think they connected via my WiFi router. I don't think there was a direct connection between any of my computers and the printer. Is there a router in your configuration? I do seem to recall that during the setup process I had to choose EITHER direct network cable connection OR WiFi connection and understood that to change the connection type I would have to re-run the setup program. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now