Pink7

4 of my wires to BMS is a bit short to reach the batteries in bottom of my build. Extend the needed 4 wires or get a JST extension for the whole set of wires? Pink

And then the tool decide to be working again..After try taking it apart and back again. Pink

Just checked.. No warranty. Pink

Good idea. Plan one now is a DIY with some of the parts from the crimp tool and some steel and a hammer. Pink

Some progress last days on cables and breaker boxes etc, but have to do some changes from my plans as the cables much less flexible than i expected. I was just making cables from breakers to batteries now when the tool to crimp the connectors just stop working, so i must check if i can replace the hydraulic. So it held up 10 connectors or so.. Pink

I have a feeling that Thailand just get hotter for every year.. Pink

I soldered quite a few XT60 ( Building and flying Rc Helicopters and Gliders) Still not happy with the outcome of the soldering.. Pink

I will check 2 mechanic friends who live near me. They must have 4 of this connectors i guess. Pink

I did not think about that... Good Point Crossy!! Pink

I was plan to solder, i need to solder on the terminal connectors on the battery cables also. Why not solder to the switch? Pink

I found it now on youtube:

Back in business guys... Got up more water storage and also improved water filtering and added a waterpump. Things at times take more time than normal..I dont have quite same energy as im used to in younger days and in colder climate. What i need now next is to get my breaker boxes ready and cabled. Regarding the pre charger: I will follow the drawing and plan discussed with Crossy. When it come to the momentary switch. Anyone know what 2 pinst to connect too? there is 2 pins in side and 2 under. Pink

Been to busy and hot latterly to work on this but its not much left and it should be all ready. Hopefully sine progress and updates soon. Pink

Thats what I used! Pink

My delivery around 25 kg and it was by land, 12-13 days or so Pink

2 x GROWAT SPF5000ES Shipping cost:236USD ship by Thailand Special Line including Customs declaration and tax. Pink

Good idea. I have a 16mm2 solid copper wire i could use that way. Pink

I just did another test where i used shera after 4 levels up, then i got better leveling and stability. If i end up doing it it means some custom busbars. Even im happy with the quality on my cells its not as easy or exact to build this way as if i just used to "normal" side down. Pink Pink

Currently struggling to get batteries in level, the foam between complicate the leveling. Im on my 3th round now, this time i tried to use the busbars to temporary help leveling.. Next round i might throw out the foam. Pink

Should not be possible to ad any cost as long as the trade is kept within Lazada system. I have got much on Lazada from China and it use to be much faster than normal ordering from China. Use cash on the delivery to be on the sure side? Pink

When you order on Lazada there is no vat or other import expenses. Pink

Is this the same as was canceled? Its 12k ( without wifi) Pink

A smart and economic setup without batteries can be super economic and very fast payback time !!!. My brother in law who assist me on my setup with some welding work etc need something like that for their shop and home.. Just need the free daytime power at low cost. Pink

I have not connected yet, but there is a bolt with a ring in the top to clamp the wire Pink

My 2.4m ground bar for the 2 DC Surge Protectors are currently 2.3m under ground and 10 cm over ground. My helper want to hammer it to under soil level. Anyone have any views on this? Pink