Joinaman Posted January 14, 2020 Share Posted January 14, 2020 Hi there have lost the keys to spare building and need to replace the cylinder its a 90mm Euro cylinder, 50 - 40 split Any ideas for the best place to get one quickly Am in Nakon Phanom so either local places, or by delivery Thanks in advance Link to comment Share on other sites More sharing options...
Metropolitian Posted January 14, 2020 Share Posted January 14, 2020 Are you able to take the cylinder out? Many can't, you need the key to move the axis 30 degrees before removing. But if you can, take the cylinder to a key maker, perhaps they can 'feel' the number and make a new key for you. I have done that before, with cylinder in slot case, without door. Disassembled the slot case and went to the locksmith with the cylinder. But if you do know a supplier, and especially for those slot case too. Please tell us. Having ABUS cylinders here, and I am looking for the slotcases ???? Link to comment Share on other sites More sharing options...
Metropolitian Posted January 14, 2020 Share Posted January 14, 2020 Not ABUS but Lips. I'm getting old. ???? Link to comment Share on other sites More sharing options...
Joinaman Posted January 18, 2020 Author Share Posted January 18, 2020 On 1/14/2020 at 10:15 PM, Metropolitian said: Are you able to take the cylinder out? Many can't, you need the key to move the axis 30 degrees before removing. But if you can, take the cylinder to a key maker, perhaps they can 'feel' the number and make a new key for you. I have done that before, with cylinder in slot case, without door. Disassembled the slot case and went to the locksmith with the cylinder. But if you do know a supplier, and especially for those slot case too. Please tell us. Having ABUS cylinders here, and I am looking for the slotcases ???? Thanks for the reply I managed to get the cylinder out easily, was set in the open position so just slid out,.Thought i would have trouble with the usual ones set at an angle and need key or thumb turn to rotate to release Friend found me a locksmith who was able to cut new Multi T keys for it, 300 baht for 2 keys cut, and ready the next morning Tried a lot of shops in both Sakon Nakhon and Nakon Phanom and nobody could supply one that size, but all good now Cheaper than buying new cylinder as well , from looking online Thanks again 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now