Mag Wheel Stud Patterns

[mekka]

Anyone know how far off the Stud Pattern is from a Trition compared to a Vigo?

Mate has some rims for sale off his Trition and id love them, but not sure if they would fit..if not does anyone know if they are close enough to be re-drilled as ive done this in the past with other rims on a previous car.

[Jareddiving]

I dont know if they fit but are'nt they almost the same??

[Sojourner]

Anyone know how far off the Stud Pattern is from a Trition compared to a Vigo?

Mate has some rims for sale off his Trition and id love them, but not sure if they would fit..if not does anyone know if they are close enough to be re-drilled as ive done this in the past with other rims on a previous car.

You will also want to check the offset of the new wheels to see if they will fit under your bodywork. Measure from the face of the wheel where it contacts the rotor hub to the outside of the (inside) rim. Compare this to your stock wheels.

[goldfish]

Excuse my ignorance here, but what is re-drilling? The only way I can see this happening is to weld and then drill new holes. It sounds a little like expanding the holes cause 'it's near enough'. Apart from that it's simply a case of measuring every possible contact place to make sure they fit, including the tyres. My own thoughts are, if they are not identical then don't. But then, that's just me

[funfun]

I dont know if they fit but are'nt they almost the same??

not familiar with either car or pickup, but rule of thumb is check pcd of each hub and compare, then the offset (some cars fwd or rwd or 4x4 etc)

and if every thing still looks good see if one fits ok, front and rear and if alls going well carry on, until either ya happy, or its not right to which its only cost an hour!

specially tommorw keep our minds of drink day!

chris

[mikethevigoman]

Anyone know how far off the Stud Pattern is from a Trition compared to a Vigo?

Mate has some rims for sale off his Trition and id love them, but not sure if they would fit..if not does anyone know if they are close enough to be re-drilled as ive done this in the past with other rims on a previous car.

MTVM to the rescue !!! yes boys,if 6 stud both trucks are 6-139.7 with a 15/20 offset, in fact all the trucks are the same ( in six stud except the navara which is 6-114.3,) so buy em and get em on !

[mekka]

Mike you just saved the day! Im about to pick up a set of 24" rims for my new Vigo...now knowing they have the same stud pattern thats a go ahead for me, Thanks!!!