-
Recently Browsing 0 members
- No registered users viewing this page.
-
Topics
-
-
Popular Contributors
-
Latest posts...
-
16
Lazada Sleeping Pills.
He refers to the fact it is addictive not the strength as a sleeping medicine itself. If it ends with pam it's usually no good hehe. -
39
Root canal prices in Thailand (and comparisons)
12 implants would probably be more in the 600-700,000 baht range so. Crazy Turkey is so much cheaper than Thailand now. My neighbor got a root canal for 5000 baht but it was through a public hospital which waiting lists which can be months long. There's got to be cheaper options because the average Thai people can't afford 40,000 root canals. -
4,040
-
4,040
-
2
Politics Thai PM Responds to Moody’s Downgrade, Dismisses Casino Rumours
This situation is akin to when an author explicitly explains the meaning behind a specific part of their writing, only for readers to counter with, 'No, what I think you meant to say was..." -
0
Possible to monitor the extra (unused) power available on a Growatt SPF6000ES ?
Hi, I started running a Growatt SPF6000ES inverter, with which I'm globally satisfied, on an On-Grid (but no export) configuration. No batteries at this stage. In order to optimize the system, meanwhile the primary devices are already running and if there's any power produced by the panels unused, I'd like to automatically launch secondary equipments (ex: oxygenating pumps for the ponds, tank water heater, etc.). This implies I would need to collect this information (amount of extra power available) first, in real time and continuously. My question is : Is this a data that can be retrieved somehow from the inverter ? (I have no idea if the inverter is even in condition to estimate this value) I didn't find any mention of this on the UM or searching on the net. Thanks for any info or experience on the topic, ps: definitely not a geek in electronics, but I should be able to write down and inject some basic code on a board that would process the data and run a few relays accordingly 😉 ps2: I don't want to go the empirical way (progressively increasing loads until detecting the inverter must draw from the grid) - unpractical
-
-
Popular in The Pub
-
.thumb.jpeg.d2d19a66404642fd9ff62d6262fd153e.jpeg)
Recommended Posts