overherebc Posted June 12, 2015 Share Posted June 12, 2015 Has anyone seen Nitromorse or equivalent here in Thailand ?. Need to remove small sections of powder coat that were not masked properly, frame number and 5 or 6 bolting areas. Link to comment Share on other sites More sharing options...
papa al Posted June 12, 2015 Share Posted June 12, 2015 Maybe give acetone, (fingernail polish remover) @ 7/11 a try? Link to comment Share on other sites More sharing options...
overherebc Posted June 12, 2015 Author Share Posted June 12, 2015 I'll try that and let you know. Link to comment Share on other sites More sharing options...
papa al Posted June 12, 2015 Share Posted June 12, 2015 Scrape. Sand. Link to comment Share on other sites More sharing options...
kiniyow Posted June 12, 2015 Share Posted June 12, 2015 Mix Rubbing Coumpound with a Liquid Wax...Takes away the Haze and comes alive with a New finish look Link to comment Share on other sites More sharing options...
overherebc Posted June 12, 2015 Author Share Posted June 12, 2015 Its shiny enough ☺I want to be able to read the frame number and get about 6 bolts thtough the holes they should go through. Link to comment Share on other sites More sharing options...
Gonsalviz Posted June 12, 2015 Share Posted June 12, 2015 Sandpaper for the frame number. Sandpaper again for the bolt holes. Fold a small piece of sandpaper into a length of wire. Insert the wire into a drill motor chuck and sand the hole out. I think ata Thai Watsadu, I saw fine grit sand paper around 40,000 to 50,000 grit. If you finish it up with that, I'd say any polishing compound would clean it up nicely. Gonna take time though. Link to comment Share on other sites More sharing options...
Overandout Posted June 12, 2015 Share Posted June 12, 2015 Sandpaper for the frame number. Sandpaper again for the bolt holes. Fold a small piece of sandpaper into a length of wire. Insert the wire into a drill motor chuck and sand the hole out. I think ata Thai Watsadu, I saw fine grit sand paper around 40,000 to 50,000 grit. If you finish it up with that, I'd say any polishing compound would clean it up nicely. Gonna take time though. You don't want to be rotary sanding threaded bolt holes in a frame, you'll ruin the threads. The only way to clean those out is with a tap of the right thread size. Should cut through powder coat quite easily. Link to comment Share on other sites More sharing options...
overherebc Posted June 12, 2015 Author Share Posted June 12, 2015 Agree on the threads but luckily they have not been coated. The rest are just tight fit unthreaded holes. Link to comment Share on other sites More sharing options...
.png.3b3332cc2256ad0edbc2fe9404feeef0.png)
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now