pokerkid Posted August 14, 2016 Share Posted August 14, 2016 Anyone has experience painting galvanized steel beams. Do i need to use a special primer for that ? Link to comment Share on other sites More sharing options...
manfredtillmann Posted August 14, 2016 Share Posted August 14, 2016 you'll need an etch primer; https://images.search.yahoo.com/yhs/search;_ylt=AwrTccjd069XbxcAGE0PxQt.;_ylu=X3oDMTBsOXB2YTRjBHNlYwNzYwRjb2xvA2dxMQR2dGlkAw--?_adv_prop=image&fr=yhs-ddc-linuxmint&va=metal+etch+primer&hspart=ddc&hsimp=yhs-linuxmint some acylic (water based) paints claim they can be used without but they will peel. the fresher your gal is, the more you need to prime. if you can, use a small foam roller to apply it. after, use an oil based paint to finish. (i hate painting ) cheers mft Link to comment Share on other sites More sharing options...
pokerkid Posted August 14, 2016 Author Share Posted August 14, 2016 1 hour ago, manfredtillmann said: you'll need an etch primer; https://images.search.yahoo.com/yhs/search;_ylt=AwrTccjd069XbxcAGE0PxQt.;_ylu=X3oDMTBsOXB2YTRjBHNlYwNzYwRjb2xvA2dxMQR2dGlkAw--?_adv_prop=image&fr=yhs-ddc-linuxmint&va=metal+etch+primer&hspart=ddc&hsimp=yhs-linuxmint some acylic (water based) paints claim they can be used without but they will peel. the fresher your gal is, the more you need to prime. if you can, use a small foam roller to apply it. after, use an oil based paint to finish. (i hate painting ) cheers mft Thanks for that. Do you now a good brand that sells that etch primer here ? Link to comment Share on other sites More sharing options...
manfredtillmann Posted August 14, 2016 Share Posted August 14, 2016 no, sorry, i do not work in thailand. go for a known brand, not necessary the cheapest. Link to comment Share on other sites More sharing options...
Kwasaki Posted August 14, 2016 Share Posted August 14, 2016 Google search https://www.thaitrade.com/supplier/nippon_paint__thailand__co___ltd_/product_detail/58215 Link to comment Share on other sites More sharing options...
chiang mai Posted August 14, 2016 Share Posted August 14, 2016 I'm currently refinishing a long section of outside wall that incorporates galvanised box beams, I'm using red oxide as a primer followed by gloss enamel - the previous sections were done the same way two years ago and they are holding up well. Link to comment Share on other sites More sharing options...
manfredtillmann Posted August 14, 2016 Share Posted August 14, 2016 7 minutes ago, chiang mai said: I'm currently refinishing a long section of outside wall that incorporates galvanised box beams, I'm using red oxide as a primer followed by gloss enamel - the previous sections were done the same way two years ago and they are holding up well. while that might work on weathered / old gal it is definitely the wrong choice on new coatings. by the way, red primer is a very old product, it was used on the titanic and the eiffel tower. it might even contain lead. there much better products available these days. Link to comment Share on other sites More sharing options...
chiang mai Posted August 14, 2016 Share Posted August 14, 2016 1 hour ago, manfredtillmann said: while that might work on weathered / old gal it is definitely the wrong choice on new coatings. by the way, red primer is a very old product, it was used on the titanic and the eiffel tower. it might even contain lead. there much better products available these days. I accept it's the not the most modern technology but it's inexpensive and it does work, there's remarkably little rust showing on the Titanic by the way, if you look at the undersea pictures. (that was a joke BTW, before somebody points out that rust needs air also). Link to comment Share on other sites More sharing options...
Berty100 Posted August 14, 2016 Share Posted August 14, 2016 TOA has a primer for galavanized steel, it consists of 2 components that have to be mixed.After the primer you can use water based coat. I did my rain gutters with it more than 5 years ago and no flaking has happened. Link to comment Share on other sites More sharing options...
sirineou Posted August 14, 2016 Share Posted August 14, 2016 clean the metal with a de-greaser, and when it is dry wipe it down with a white vinegar dampen cloth, the acid in the vinegar will etch the galvanism. then prime with a metal primer and paint. I have tried it, it actually works. Link to comment Share on other sites More sharing options...
weegee Posted August 14, 2016 Share Posted August 14, 2016 SILVERFROST Paint, straight over the Gal Pipe after cleaning...If it's been welded anywhere thats where the rust will come, so paint that area with a metal primer BEFORE the silverfrost..... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now