Kwasaki

Not anymore everything that a Thai wife could get from being married to a UK citizen has been done away with.

As long as your happy OK. They are not something I would recommend unless you lived by the coast.

So you have reflection to underside already so to improve you could line with boarding or plasterboard to improve a bit at cost. With the venting draw through effect of vents in gable ends roof that all you can do other than do extra venting in ridge but again at extra cost. To put 150mm or 200mm insulation on ceiling areas is about as good as you can go. Advice is always difficult online forum the solution is to be able for someone who knows what his doing to see your build and then access a suitable insulation applicantion at a reasonable cost. Unless your building is in a windy location whilibirds are a waste of time.

If you felt your whilibirds in the 45 degrees hot sun I bet you wouldn't be touching them for long and what good are they on days of hot sun and no wind.

Your thinking to much. Any fibreglass /rockwool incased in foil or not less than 10cm is OK for ceiling areas the thicker the better. Your vented gable ends are quite adequate if you go for whilibird thingys you risk the problem of leaks disturbing the roof if they are not proffesionally installed. As suggested already get a reflective underlining material installed to underside of roof and you have done a reasonable job of reducing roof heat. Lining board to incase the reflective material is OK but not that necessary butp will improve insulation a bit more but at an extra cost. I was working in construction for 34 years and the insulation question was always brought up on many types of roofing designs. Up to you what you do.

Don't know I always prep and prime then spray when using can spray.

Also with any pitch roof and hip roof construction vented ridge tiles and vented hip tiles help.

Air flow through roof with insulation also on the ceiling is my experience along with noise insulation.

Put a reflective product to underside of roof area. Then line the underside with suitable board material. Lay fibreglass / rockwool minimum of 10cm thick over area of room ceiling areas. Job done. You have vented gable ends good.

Wave similar to a motorbike a Click is a scoot. What does he want.

You make no sense whatsoever. You are obviously not a a regular road user.

An IDP accompanied with your full DL from your home country. If you are staying for more than 3 months say get a 2 year Thai DL.

If you read the car was crossing a main road, the motorbike rider was riding on the main road. The picture shows a whooping great dent in the side of the car made by the motorbike. How much more evidence do you need. It's the classic 'T' bone crash scenario not rocket science.

Warned not to ride such a big machine because car drivers will not take any notice of you if they want to cross the road in front of you. RIP killed by another bad car driver and probably an inexperienced big bike rider.

Maybe his talking V6 model's.

How about how much is a CX3 and the MG.

What motorbike do you ride.

In addition to what you have sent your friend needs to send you 2 papers by what ever means from the DLT office for you to sign and send back to him.

Batteries are cheap enough on Lazada the Old devil gel batteries I have found to be really good after giving my one a hard time whilst doing servicing and repairs and leaving the bike standing for 3 weeks at a time sometimes. If I were you I'd buy 2 batteries and buy a trickle charger which are also cheap, then you will not have a problem.

There's something wrong with you if you ask me most of your posts are a weird way of looking from an experienced rider point of view.

Of course I do a piece of cake if you're experienced enough if you don't feel safe or are having fear then then don't drive or ride.

Can't find the invoice of some 2years ago so I contacted my son in UK he gave me the name of these guys and said this company is highly recommended. https://www.electrexworld.co.uk/cgi-bin/ss000001.pl?page=search&SS=Royal+enfield+&PR=-1&TB=O&ACTION=Go! Electrex World has been manufacturing motorcycle electrical components in the UK for over 25 years. 99% of our products are manufactured by Electrex World in the UK using state of the art equipment. Our products use high quality components and have proven to be very reliable. We are proud to be Original Equipment Manufacturers for several companies and we sell to many distributors throughout the UK as well as exporting to Europe, Canada and America. All of our products are competitively priced and many are cheaper than brand name parts. How to contact us Business Hours: Monday - Friday 9.00am - 5.00pm Please note that orders received after 3pm will not be sent out till the next working day. Click here for Sales Enquiries Click here for Technical Enquiries Tel: +44( 0 )1491 682369 Fax: +44( 0 )1491 682286 Hope it helps there not cheap but what I paid was 50 or 60 something pounds from memory.

I sorted it 2 years ago from the UK a electronic company that supplies MotoGP. I keep invoices so I'll have a look in the morning for ya and see if I can find there web address. ????

Well I didn't up to 65 and still OK at 74 so how do you know you will have problems.

Perfectly normal for an insurance company to offer to do it all for you here in Thailand. If you don't trust them go and do yourself at the DLT office of the province that you move to its not that difficult just take all the paperwork that the insurance company wanted.