New pump installed when house built in new village about 5+ years ago. Village is on the superhighway about 1 km past Big C Don Chan going to Lamphun..

 

House has 3 bathrooms upstairs (all used at least a couple of times a day, and often 2 even 3 showers used at the same time).  And 2 bathrooms downstairs, plus bigger size washing machine, kitchen sink etc.

 

Up to now the pump coped very well even when 3 showers upstairs in use. 

 

But very recently the water flow in any shower upstairs has noticeably reduced and is intermittent (I realize this is from the basic actions of the pump). Still enough pressure to take a shower but a few minutes longer. 

 

My question:  does any CM member know a pump guy who can give us some professional advice on this.  

 

I realize that some parts must be worn and probably can be replaced, but is it better (given the age of the pump and it's past usage) to just replace the pump?

(Because of my age and level of mobility I cannot  service / repair / replace the pump myself.)

 

All advice appreciated.

 

Thanks. 

 

 

 

 

 

Edited April 22, 20188 yr by scorecard

Give Bob a call at ‭082-196-6003‬. His profession are all about pools which involves pumps as well. He might be able to assist. 

1 hour ago, jeffandgop said:

Give Bob a call at ‭082-196-6003‬. His profession are all about pools which involves pumps as well. He might be able to assist. 

 

Thanks, I'll give him a call.