Andrew Dwyer Posted July 21, 2018 Share Posted July 21, 2018 Pvc pipe ( the blue stuff) comes in 3 wall thicknesses, 5, 8.5 and 13.5 .I imagine that the “5” would be easily squashed with the cutter but the other two can be cut without damaging with a little care !! Link to comment Share on other sites More sharing options...
malt25 Posted July 21, 2018 Share Posted July 21, 2018 50 minutes ago, grollies said: Who? Me or him? Please explain your comment. Not you. I agree with your comment. Link to comment Share on other sites More sharing options...
kamalabob2 Posted July 21, 2018 Share Posted July 21, 2018 Cutting PVC or PPR or even steel reinforced autoclave lintels has been graciously accomplished for me in Buriram at a store other than Homepro. Different tools make a cleaner cut in 8.5 and 13.5 PVC pipes. Not all blue PVC pipe and not all Green PPR water pipe is manufactured to the same high quality in Thailand or China or Vietnam. Link to comment Share on other sites More sharing options...
NanLaew Posted July 21, 2018 Share Posted July 21, 2018 4 hours ago, wgdanson said: When you squeeze the handles, it squashes the pipe to be oval, so cannot pust it then into another fitting, or so I experienced. Stop buying low-grade blue pvc pipe... or giving your good money to third parties who buy the low-grade, thin-walled rubbish and pocket the difference. Solved. Link to comment Share on other sites More sharing options...
grollies Posted July 21, 2018 Share Posted July 21, 2018 1 hour ago, NanLaew said: Stop buying low-grade blue pvc pipe... or giving your good money to third parties who buy the low-grade, thin-walled rubbish and pocket the difference. Solved. Agreed, I got suckered with pipe grades when I first arrived in LOS. The UK, the lower the grade number (SDR) the thicker the pipe wall. But, oh no, not here. Link to comment Share on other sites More sharing options...
grollies Posted July 21, 2018 Share Posted July 21, 2018 DIY section, lol Link to comment Share on other sites More sharing options...
grollies Posted July 21, 2018 Share Posted July 21, 2018 So, come on Scouse, you going to have a go cutting pipe yourself or what? Link to comment Share on other sites More sharing options...
rexall Posted July 23, 2018 Author Share Posted July 23, 2018 On 7/19/2018 at 8:43 PM, Phuket Man said: A 10 Baht hacksaw blade is all you need. I give up. Wouldn't you need a hacksaw to go with the blade? Link to comment Share on other sites More sharing options...
malt25 Posted July 23, 2018 Share Posted July 23, 2018 Not necessarily. I've often had to use a broken blade to get into inaccessible places. If one wants to get a bit fancy, just wind tape of some sort around the end & makes it a bit more comfortable to told. I guess if one isn't into purchasing the proper cutter & opts for the cheap thin wall pipe, he isn't going to go to the expense of tape for a handle. Link to comment Share on other sites More sharing options...
grollies Posted July 23, 2018 Share Posted July 23, 2018 26 minutes ago, malt25 said: Not necessarily. I've often had to use a broken blade to get into inaccessible places. If one wants to get a bit fancy, just wind tape of some sort around the end & makes it a bit more comfortable to told. I guess if one isn't into purchasing the proper cutter & opts for the cheap thin wall pipe, he isn't going to go to the expense of tape for a handle. I tend to dig into inaccessible places, if necessary with a hilti drill. I learned a long time ago to make room for pvc pipe repairs, even if it means concrete-cutting with my 6" grinder. Got fed up with grazed knuckles, pipe that was too difficult to re-join and wet, muddy holes. Now I dig an <deleted> great hole. 1 Link to comment Share on other sites More sharing options...
sipi Posted July 24, 2018 Share Posted July 24, 2018 I would be cutting them myself. If you have "a couple of dozen to be cut at various lengths" unless you have laid out a template allowing for every fitting and clearance, guaranteed some of them will be cut wrong. 2 Link to comment Share on other sites More sharing options...
r136dg Posted July 25, 2018 Share Posted July 25, 2018 3 hours ago, sipi said: I would be cutting them myself. If you have "a couple of dozen to be cut at various lengths" unless you have laid out a template allowing for every fitting and clearance, guaranteed some of them will be cut wrong. OP might want to add a bag of splicers to his shopping list for corrections when he gets to fitting everything. Unfortunately he'll still need a hack saw (or something). 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now