regedit Posted December 9, 2011 Share Posted December 9, 2011 Need for 40" LCD. Which brands to look for/avoid ? Best to buy manufacturers model ? Best place to buy in Pattaya ?Thanks for any advice. Link to comment Share on other sites More sharing options...
sotsira Posted December 9, 2011 Share Posted December 9, 2011 I would buy the universal ones, no need to buy the manufacturer's. You can buy them at Numchai's Store on the Sukumvitt. Also check if you need left & right tilt as well as top & bottom tilt. Consider the correct fixings to the wall for the size and weight of the TV. Know what type of wall you will be fixing to, (breezeblock or clay brick) and choose the correct rawplugs accordingly,remember breezeblock walls are soft, therefore short rawplugs can easily pull out once weight of the TV is mounted. Link to comment Share on other sites More sharing options...
Langsuan Man Posted December 10, 2011 Share Posted December 10, 2011 At one time Numchai was the only place where you could find them and they have / had several imported brands But now Power Buy is selling them also, so I would go to their new store on Pattaya Klang, up (towards Sukumvit) from Foodland and check them out Link to comment Share on other sites More sharing options...
MJCM Posted December 10, 2011 Share Posted December 10, 2011 Addition to the above post: They also sell them at the Power Buy Store in the Central Shopping Mall on Beach Road (Next to Soi 9 Police Station) Link to comment Share on other sites More sharing options...
astral Posted December 12, 2011 Share Posted December 12, 2011 You need those bolts, about 1cm diameter that expand as the screw is tightened. I would not like to trust my expensive TV to rawlplugs. Link to comment Share on other sites More sharing options...
CHIEFOFFICER Posted December 13, 2011 Share Posted December 13, 2011 You need those bolts, about 1cm diameter that expand as the screw is tightened. I would not like to trust my expensive TV to rawlplugs. So true Link to comment Share on other sites More sharing options...
sotsira Posted December 13, 2011 Share Posted December 13, 2011 You need those bolts, about 1cm diameter that expand as the screw is tightened. I would not like to trust my expensive TV to rawlplugs. So true Yes, agreed when fixing in to concrete or red clay bricks, but these expanding bolt studs don't work well with breeze-block walls as they're too soft and the studs can pull out. Link to comment Share on other sites More sharing options...
nellyp Posted December 26, 2011 Share Posted December 26, 2011 You need to check your screw hole size. The universal brackets do not fit all TVs (though they do fit most). Just measure the distance between screw holes. If you are conserned about the dtrength of the wall, consider drilling through and fitting bolts to small plates, and then cover with a picture. This would be ultra safe. Link to comment Share on other sites More sharing options...
.png.3b3332cc2256ad0edbc2fe9404feeef0.png)
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now