i have a leak from either a gasket or a seal on a bearing on my water pump would like to try and repair before replacing.

has anyone seen a specialist pump shop have looked in hw and home pro no spares available

Going up Pataya Klang towrds Sukhumvit) past big C extra on opposite side of road is a paint shop and pumps who can get spares.

Make sure you have model number etc.

Going up Pataya Klang towrds Sukhumvit) past big C extra on opposite side of road is a paint shop and pumps who can get spares.

Make sure you have model number etc.

thanks will go take a look

You could always buy a bit of gasket material and make your own. You would have the pump apart anyways so tracing out a template would not be hard.

Even the liquid gasket works well.

Edited August 17, 201213 yr by Gone

You could always buy a bit of gasket material and make your own. You would have the pump apart anyways so tracing out a template would not be hard.

Even the liquid gasket works well.

think it may be more than a gasket more like a bearing seal on the shaft from the pump, want to source parts before i strip the pump as at the moment its just dripping water when not powered and running water when powered but still pressurising the system