mikeinkamala Posted October 29, 2012 Share Posted October 29, 2012 Hi, Anybody know what is the best stuff to use to ensure that gloss paint will stick to Aluminium guttering? Is Red Oxide paint the best for Aluminium? Whoever painted the gutters on my house before painted gloss straight on to the Aluminium and consequently it is now all peeling off. Hopefully someone can advise me what is best. Mike. Link to comment Share on other sites More sharing options...
KarenBravo Posted October 29, 2012 Share Posted October 29, 2012 Red oxide paint is okay for aluminium. Link to comment Share on other sites More sharing options...
LivinginKata Posted October 29, 2012 Share Posted October 29, 2012 Red oxide paint is okay for aluminium. Still peels off after a few months. Link to comment Share on other sites More sharing options...
Shot Posted October 29, 2012 Share Posted October 29, 2012 ICI Dulux has an Aluminum Primer. Also, most exterior paints that are 100% acrylic will self prime on aluminum; you will need to check the data sheet, not the label. Regardless of what you get, the surface must be clean, dull, and dry. Any of the paint remaining must be removed because the primer or paint will grab tight and pull it off. Anything 100% acrylic will hold up better in this climate than a solvent based system. Link to comment Share on other sites More sharing options...
stevehaigh Posted October 30, 2012 Share Posted October 30, 2012 are you sure its aluminum? gutters are usually galvanized steel, i've never seen aluminum ones. but in any case, red or gray oxide primer if probably your best and cheapest bet. it mostly depends on how well you apply it. Link to comment Share on other sites More sharing options...
Valentine Posted October 30, 2012 Share Posted October 30, 2012 Jotun have a marine grade paint specifically for aluminium including primer. It comes in a 2 part mix. They have different versions for use on concrete & steel as well. Link to comment Share on other sites More sharing options...
mikeinkamala Posted October 30, 2012 Author Share Posted October 30, 2012 Thanks for all the advice Gents, very useful, I really appreciate it Link to comment Share on other sites More sharing options...
MAJIC Posted October 30, 2012 Share Posted October 30, 2012 If I remember correctly,Yellow Cromite undercoat was the best for Aluminium,it goes on watery and dosn't peel. Link to comment Share on other sites More sharing options...
.png.3b3332cc2256ad0edbc2fe9404feeef0.png)
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now