I've looked high and low for six years and have never seen any here. Can anybody tell me where I can find them? I need for casing and trim work.

Photo attached, hope it's big enough.

I can't see the pictures clear.

But I found nails for concrete for pneumatic nailer (however that device is called in english) and they are just excellent for wood. Only the head is a bit too small.

I can't see the pictures clear.

But I found nails for concrete for pneumatic nailer (however that device is called in english) and they are just excellent for wood. Only the head is a bit too small.

Here's another.

It's simply a nail without a head. The shank flairs and widens a bit at the top, allowing it to cinch in tight. Then you use a nail set to knock it below the surface, leaving a minor divot to be puttied over.

If the head is too small, then it won't have good pull-out qualities.

I can't see the pictures clear.

But I found nails for concrete for pneumatic nailer (however that device is called in english) and they are just excellent for wood. Only the head is a bit too small.

Here's another.

It's simply a nail without a head. The shank flairs and widens a bit at the top, allowing it to cinch in tight. Then you use a nail set to knock it below the surface, leaving a minor divot to be puttied over.

If the head is too small, then it won't have good pull-out qualities.

You probably wont find that in Thailand...I have looked too. Try to get hold of the good liquid nail(in Tube), it works if you choose a good brand.

Have a friend send some over slow post, can't imagine the duty would be much. . .