Jump to content

Can't Open My Safe - What Do I Do?


Recommended Posts


For reasons that I won't go into, I can't open my safe. It's accessed via digital code & key.

Any suggestions for who I might contact to get the ###### thing open, even if it causes the safes ultimate demise. Cheers.

There is normally a reset buttom under the digital faceplate also a small jack for a electronic plug in tool.

Link to comment
Share on other sites

seriously though, At a hotel I once had an eletronic in-room safe malfunction. The manager brought with him a 9-volt battery and connected two wires to the front panel (he obviously knew where to attach the wires). he just held the wires with his fingers and the battery reset the safe's code. You should check with the manufacturer if there is a similar reset capability for your safe. Might save you a lot of effort and damage.

Link to comment
Share on other sites

Ive often wondered about the reset thing on safes. I too have heard there is way to reset. Makes you wonder what the point of having a safe, hotel or personal, if someone can just reset it / stick some wires onto it....

Link to comment
Share on other sites

seriously though, At a hotel I once had an eletronic in-room safe malfunction. The manager brought with him a 9-volt battery and connected two wires to the front panel (he obviously knew where to attach the wires). he just held the wires with his fingers and the battery reset the safe's code. You should check with the manufacturer if there is a similar reset capability for your safe. Might save you a lot of effort and damage.

looks rather that the safe's batteries went flat and the manager put some power to be operational again. Once opened the cod can be reset - but I haven't heard about resetting the safe when it's locked. Defies the purpose of safe

Link to comment
Share on other sites

Who installed it? Once had a similar issue with a non-electronic Leeco while setting the combination... they just came out with a new one the same day. Have never had much confidence in battery operated safes myself.

:o

Link to comment
Share on other sites

I had the same thing happen to me in a hotel room. The manager got the opening device, but it didn't work either. When some of the units fail (this was an ElSafe), there is no way to open the electronically. You will get the "too many attempts" lockout, and it is easier to go the brute force route. Four hours later the hotel engineer finally got it open... too bad he didn't have what Percy recommended. It was actually quite comical.

If you don't have a proper metal saw, a crowbar will work eventually with enough sweat and clear access to the safe. Much easier to hire a locksmith that can crack it properly rather than trying to outsmart the metal. We didn't have much luck with a standard grinder either.

Link to comment
Share on other sites

AFAIK most electronic safes have jump connexions, or a physical key override, {which resets combination so it can't be used 'invisibly' during guest's stay} to allow the safe to be opened. After all how does a hotel deal with the guest who checks out and left the safe, empty but locked? Guess locksmith is the most logical port of call first.

Regards

Link to comment
Share on other sites

For reasons that I won't go into, I can't open my safe. It's accessed via digital code & key.

Any suggestions for who I might contact to get the ###### thing open, even if it causes the safes ultimate demise. Cheers.

From Where did you buy the safe? you can call them , and they will send an specialist to open your safe .

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.








×
×
  • Create New...