rijb Posted June 26, 2010 Share Posted June 26, 2010 Does anyone have experience using fiber cement products for Thai home construction (siding, framing, etc.)? I'm researching cost/benefits compared to typical cement/steel products. http://www.mahaphant.com/en/our-products/product-shera.jsp Link to comment Share on other sites More sharing options...
CDNinKS Posted June 26, 2010 Share Posted June 26, 2010 (edited) post deleted sorry, thought you meant adding fiber to wet concrete... Edited June 26, 2010 by CDNinKS Link to comment Share on other sites More sharing options...
jaideeguy Posted June 28, 2010 Share Posted June 28, 2010 Great stuff for enviornment......have used some of the siding material, shiplapped and the only complaint I have is that it is extremely brittle and won't take a bang like real wood. It'll crack. have to pre drill holes too, but can be attached with revets. Best thing is that it doesn't rot and bugs don't eat it. Link to comment Share on other sites More sharing options...
Rimmer Posted June 28, 2010 Share Posted June 28, 2010 I've used it a lot, the last job I used it on was a swimming pool deck and the sun slats over it, cost for the heavy planks was just about the same as wood but it lasts for ever. Easy to fix with the special screws that drill through the cement board then tap straight into a steel batten. You can easily cut it with an angle cutter then shape it with ordinary wood tools. Does not warp or rot, I like it a lot. Link to comment Share on other sites More sharing options...
wpcoe Posted July 9, 2010 Share Posted July 9, 2010 ... and the only complaint I have is that it is extremely brittle and won't take a bang like real wood. It'll crack. have to pre drill holes too, but can be attached with revets. Best thing is that it doesn't rot and bugs don't eat it. I like the idea of using it for skirting/molding/coving (take your pick), but wonder how it would be attached to a typical rendered brick wall. The way the guys did the wood molding at my current place was nailing it via a compressed-air hammer. I presume that would shatter this stuff? Would you have to glue it to the wall? (I'm just thinking ahead to renovating my next place, though not sure how imminent it will be.) Link to comment Share on other sites More sharing options...
fremmel Posted July 10, 2010 Share Posted July 10, 2010 I used contact cement for mine. I tried regular construction adhesive first but that wasn't tacky enough to hold the base molding in place while it set. The contact cement works well but, as always with contact cement, you do have to position things right the first time. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now