Good place to have security bars made

[BB1955]

Anyone have any suggestions on who to use for security bars . I dont want the fancy stainless steel ones .... Like to find someone that does a good job at a reasonable price ..........

[kaptainrob]

On the south side of HD road beyond Makro, just past 7-11 on the Ban Wangtan corner. Old chap will come measure, very reliable.

[BB1955]

On the south side of HD road beyond Makro, just past 7-11 on the Ban Wangtan corner. Old chap will come measure, very reliable.

Thanks I ll check them out tommorow

[worgeordie]

There are 2 metal shops on Mae Jo Road ,opposite side to Caltex petrol station,

before you reach Meechoke Plaza.

You should also consider,that they may keep intruders out,but in case of fire

may also prevent you from making a quick exit, the reason I don't have them,

the life of my family and i are much more valuable,than anything that can be

stolen, they can be replaced, but once your dead thats it !

regards Worgeordie

[BB1955]

There are 2 metal shops on Mae Jo Road ,opposite side to Caltex petrol station,

before you reach Meechoke Plaza.

You should also consider,that they may keep intruders out,but in case of fire

may also prevent you from making a quick exit, the reason I don't have them,

the life of my family and i are much more valuable,than anything that can be

stolen, they can be replaced, but once your dead thats it !

regards Worgeordie

I have considered that and my thoughts are I like to sleep with the windows open , Im on the perimiter of the moo baan on two sides . Weighing the options I ll go for the bars .....

[Dante99]

There are 2 metal shops on Mae Jo Road ,opposite side to Caltex petrol station,

before you reach Meechoke Plaza.

You should also consider,that they may keep intruders out,but in case of fire

may also prevent you from making a quick exit, the reason I don't have them,

the life of my family and i are much more valuable,than anything that can be

stolen, they can be replaced, but once your dead thats it !

regards Worgeordie

I have considered that and my thoughts are I like to sleep with the windows open , Im on the perimiter of the moo baan on two sides . Weighing the options I ll go for the bars .....

Think carefully about the method of installation and you may come up with a solution. Example, a guy did his own installation leaving the bars on one window less solidly attached but with the same appearance. That one he could pull, pound or pry out quickly.

[BB1955]

There are 2 metal shops on Mae Jo Road ,opposite side to Caltex petrol station,

before you reach Meechoke Plaza.

You should also consider,that they may keep intruders out,but in case of fire

may also prevent you from making a quick exit, the reason I don't have them,

the life of my family and i are much more valuable,than anything that can be

stolen, they can be replaced, but once your dead thats it !

regards Worgeordie

I have considered that and my thoughts are I like to sleep with the windows open , Im on the perimiter of the moo baan on two sides . Weighing the options I ll go for the bars .....

Think carefully about the method of installation and you may come up with a solution. Example, a guy did his own installation leaving the bars on one window less solidly attached but with the same appearance. That one he could pull, pound or pry out quickly.

A good sledge hammer in the bedroom could serve a couple of purposes ......

[Dante99]

hinges and a lock?

[CM4Me]

If you are using iron, make sure they are painted correctly (ie a primer & a couple of finishing coats)

[BB1955]

Thanks we ened up using the same guy the moo baan uses. We ve seen his work and its quality and was the least expensive out of the four we had come look .........