AllanB Posted February 23, 2014 Share Posted February 23, 2014 Having spent many, many, many hours on my old NV400, my back was starting to suffer and the alternative was sitting on the floor and getting my asre dirty. They have little stools here, but while using one it collapsed causing me to throw paint over myself. Anyway, I was looking for some HT cable earlier this week and some chubby Thai mechanic was using a sworn off garden chair which I thought was a good idea. So I splashed out 92 baht and now have my own "Grease-monkey-lounger". I don't get my asre dirty and I can get up quicker too. Any other ideas to make life easy, especially for the old and fat, please publish here. . 1 Link to comment Share on other sites More sharing options...
Popular Post Briggsy Posted February 23, 2014 Popular Post Share Posted February 23, 2014 I thought this thread was about 20-year-old Buri Ram chicks. 7 Link to comment Share on other sites More sharing options...
Cylon Posted February 23, 2014 Share Posted February 23, 2014 Get a couple of mates around and lift bike onto the kitchen table,Then ya can eat your diner while your painting. 2 Link to comment Share on other sites More sharing options...
Cylon Posted February 23, 2014 Share Posted February 23, 2014 Get a couple of mates around and lift bike onto the kitchen table,Then ya can eat your diner while your painting. 1 Link to comment Share on other sites More sharing options...
Popular Post VocalNeal Posted February 23, 2014 Popular Post Share Posted February 23, 2014 Great idea. What are you using the cold chisel for? 5 Link to comment Share on other sites More sharing options...
seedy Posted February 23, 2014 Share Posted February 23, 2014 A bike stand is a great idea. Air powered available here, but not cheap. Alternative is to have one made of cement. Tire height about 60 - 70 cm about right for a scooter. Little lower for a larger bike. Then you can stand up to do most jobs, but sit and have the deck at the right height for the finicky jobs. Stool on casters with a tray under the seat a real time saver too. Use a jack under the frame front or rear to R and R wheels. I try not to do much bent over / kneeling jobs anymore. My Sportster knee don't like it. Link to comment Share on other sites More sharing options...
transam Posted February 23, 2014 Share Posted February 23, 2014 Great idea. What are you using the cold chisel for? Hmmmmmmmmmmmmmmmmmmm, that did cross my mind too.............. Perhaps the OP hasn't got a comprehensive tool kit eh............ Link to comment Share on other sites More sharing options...
FiftyTwo Posted February 23, 2014 Share Posted February 23, 2014 Great idea. What are you using the cold chisel for? Hmmmmmmmmmmmmmmmmmmm, that did cross my mind too.............. Perhaps the OP hasn't got a comprehensive tool kit eh............ There ain't nuthing you can't do with a hammer, cold chisel and some mull grips. Link to comment Share on other sites More sharing options...
transam Posted February 23, 2014 Share Posted February 23, 2014 Great idea. What are you using the cold chisel for? Hmmmmmmmmmmmmmmmmmmm, that did cross my mind too.............. Perhaps the OP hasn't got a comprehensive tool kit eh............ There ain't nuthing you can't do with a hammer, cold chisel and some mull grips. Weeeeeeeeeeeeeeeeell, mt ol' torque wrench might argue that............. Link to comment Share on other sites More sharing options...
AllanB Posted February 23, 2014 Author Share Posted February 23, 2014 Great idea. What are you using the cold chisel for? Call yourself a mechanic and you don't know what a cold chisel is for...pah! Someone already pointed out it is used for adjusting the mixture screws, but also decoking and gapping spark plugs, removing fuses and, of course tightening the wheel nuts, if you don't have the right spanner handy. Actual I use it for getting the carbs in and out, saves grazing my hands. Most tools have many many uses if you are too lazy to get up out of your Greasemonkey Lounger,,,anyway I am working on accessories for "my invention", beer can holder, radio/ipod player, A/C perhaps, or backside fan,.... for those "special moments".. Link to comment Share on other sites More sharing options...
Gsxrnz Posted February 23, 2014 Share Posted February 23, 2014 Back home I've got a three drawer toolbox on wheels with a padded seat on top. Great because you can roll everywhere and keep your tools right under your arse. 1 Link to comment Share on other sites More sharing options...
BSJ Posted February 23, 2014 Share Posted February 23, 2014 Great idea. What are you using the cold chisel for? Hmmmmmmmmmmmmmmmmmmm, that did cross my mind too.............. Perhaps the OP hasn't got a comprehensive tool kit eh............ There ain't nuthing you can't do with a hammer, cold chisel and some mull grips. Were you an Aussie farmer in the distant past? Link to comment Share on other sites More sharing options...
gerry123 Posted February 24, 2014 Share Posted February 24, 2014 Great idea. What are you using the cold chisel for? dips in beer saves on ice Link to comment Share on other sites More sharing options...
AllanB Posted February 24, 2014 Author Share Posted February 24, 2014 (edited) Stools with tools are too high for most jobs on a bike, have to bend over, the "GML" is the ideal height for many jobs and at only 92baht, buy another one and make the legs longer. I have most of the tools I need, just looking for a 3/8" drive socket set with screwdriver bits and allen key bits, they have them in the UK at a decent price. That will make jobs easier, but otherwise I have everything, though I haven't stripped the engine down, beyond doing the tappets. A bike stand would be nice but a bit extravagant for a ten bob bike. Plus you can't get a cow on a bike stand for milking, the bloody thing would keep falling off, cobber. Edited February 24, 2014 by AllanB Link to comment Share on other sites More sharing options...
Cylon Posted February 24, 2014 Share Posted February 24, 2014 (edited) What are you using the cold chisel for? [adjusting the points] Edited February 24, 2014 by Cylon 1 Link to comment Share on other sites More sharing options...
SantiSuk Posted February 24, 2014 Share Posted February 24, 2014 Love the "sworn-off garden chair" malaprop. Very appropriate for those times when the spanner slips and skins yer knuckles Link to comment Share on other sites More sharing options...
AllanB Posted February 24, 2014 Author Share Posted February 24, 2014 Link to comment Share on other sites More sharing options...
Woodsie888 Posted February 24, 2014 Share Posted February 24, 2014 Great idea. What are you using the cold chisel for? Call yourself a mechanic and you don't know what a cold chisel is for...pah! Someone already pointed out it is used for adjusting the mixture screws, but also decoking and gapping spark plugs, removing fuses and, of course tightening the wheel nuts, if you don't have the right spanner handy. Actual I use it for getting the carbs in and out, saves grazing my hands. Most tools have many many uses if you are too lazy to get up out of your Greasemonkey Lounger,,,anyway I am working on accessories for "my invention", beer can holder, radio/ipod player, A/C perhaps, or backside fan,.... for those "special moments".. I don't see a tapometer Allan. I trust you do have one! Link to comment Share on other sites More sharing options...
WitawatWatawit Posted February 24, 2014 Share Posted February 24, 2014 The cold chisel is very handy for slicing off bits of No.8 wire and jamming it into the spindle when you lose a wheel nut. But you should already know that. Link to comment Share on other sites More sharing options...
pineconehead Posted February 24, 2014 Share Posted February 24, 2014 Cold chisel is also good for sa tuning. Link to comment Share on other sites More sharing options...
AllanB Posted February 24, 2014 Author Share Posted February 24, 2014 Great idea. What are you using the cold chisel for? Call yourself a mechanic and you don't know what a cold chisel is for...pah! Someone already pointed out it is used for adjusting the mixture screws, but also decoking and gapping spark plugs, removing fuses and, of course tightening the wheel nuts, if you don't have the right spanner handy. Actual I use it for getting the carbs in and out, saves grazing my hands. Most tools have many many uses if you are too lazy to get up out of your Greasemonkey Lounger,,,anyway I am working on accessories for "my invention", beer can holder, radio/ipod player, A/C perhaps, or backside fan,.... for those "special moments".. I don't see a tapometer Allan. I trust you do have one! A hammer?....Nope...you got me, I give up WTFII? Link to comment Share on other sites More sharing options...
Woodsie888 Posted February 24, 2014 Share Posted February 24, 2014 Great idea. What are you using the cold chisel for? Call yourself a mechanic and you don't know what a cold chisel is for...pah! Someone already pointed out it is used for adjusting the mixture screws, but also decoking and gapping spark plugs, removing fuses and, of course tightening the wheel nuts, if you don't have the right spanner handy. Actual I use it for getting the carbs in and out, saves grazing my hands. Most tools have many many uses if you are too lazy to get up out of your Greasemonkey Lounger,,,anyway I am working on accessories for "my invention", beer can holder, radio/ipod player, A/C perhaps, or backside fan,.... for those "special moments".. I don't see a tapometer Allan. I trust you do have one! A hammer?....Nope...you got me, I give up WTFII? Yep A hammer Link to comment Share on other sites More sharing options...
AllanB Posted February 24, 2014 Author Share Posted February 24, 2014 Yep A hammer Surely you mean a small hammer, yes, but I would also like a lead hammer too. Very useful, we used to make them when I was an apprentice (after a trip to the local church), but can't buy them here. Link to comment Share on other sites More sharing options...
Garry Posted February 24, 2014 Share Posted February 24, 2014 Get a couple of mates around and lift bike onto the kitchen table,Then ya can eat your diner while your painting. Great idea. What are you using the cold chisel for? Hmmmmmmmmmmmmmmmmmmm, that did cross my mind too.............. Perhaps the OP hasn't got a comprehensive tool kit eh............ My comprehensive tool kit would not be compete without my knockometer Sent from my SM-T211 using Tapatalk Link to comment Share on other sites More sharing options...
AllanB Posted February 25, 2014 Author Share Posted February 25, 2014 (edited) About forty years ago I bought a Swedish sheath knife, the handle and sheath are made out of ugly plastic, but the important bit is made from a fantastic stainless steel alloy which keeps it;s edge no matter what. The blade was sharpened to cut conventionally, but the tip has a steeper angle, which makes an excellent deburring tool, I use it for lapping and scraping and, of course cutting most materials. Such a useful tool, I had a small engineering business for 25 years and used it almost every day and I don't think it has never been sharpened. I have bought probably ten knives since then, but nothing matches this one and all but one have fallen by the wayside, you would think alloys would have improved over forty plus years, but not so and this one was not particularly expensive. Get a decent knife..... .....years ago I almost lost it when they found it in my hand luggage on a flight from Sydney to Auckland, the ozzy security guy even held it up for everyone to see along with a switchblade "pencil sharpener" I had in the bag, making me feel like a terrorist. But to my surprise he said I collect it and the switchblade, when arrived at Auckland, which I did. Not sure that would happen nowadays. Edited February 25, 2014 by AllanB Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now