Jump to content

Recommended Posts

Posted

hiya all

trying to find a free DVD Splitter to no avail. Seems tober alot out there but the ones I have used are all no good.

Anybody got any ideas?

Thanks All :o

Posted

What exactly do you want to split?

Normally you'd rip the DVD to your hard disk first, and then work on the VOB files, which are actually plain jane mpeg2 files with a different extension.

If you just want to split into the different chapters (like you would want to do with a music DVD, so you end up with 1 videofile per song) use smartripper. It gives you the option of ripping a seperate file for each chapter....

Posted

There are more questions than answers....

In what way are the ones you've used 'no good'?

Exactly how do you need to 'split' the data?

I agree with SmartRipper, or if you want to crush down onto a single recordable DVD try DVD2ONE.

Posted

To edit - split, combine or what a video after it is on the hard drive I do like VideoReDo. It is faster, neater and easier to use than most - mainly as it doesn't have all the bells and whistles and does not re- encode every time.

It is not free but has a 30 day trial if you only want to do a few jobs.

Posted

Hiya all,

I have the AVI files etc on my computer. However it will not let me put the full movie onto a 4.7gb disc? I would like to get it on one disc, however Nero just states not enough capacity?

Any ideas welcomed.

Thanks :o

Posted
Have you tried DVD Shrink?

Works for me (most times anyway).

DVD shrink and the other will not recognise the file, its states it is a video clip. When I try and split ir shrink etc the software programs do not seem to recognise the file. I use easy splitter as well but htta only splits and leaves 50% of the movie in the destination folder??!!!??

Pain in the ass now!

Thanks all any suggestions welcomed :o

Posted

Hiya all

I would just like to clarify the file (Movie) is 701mb and Nero states it is to large to go on a 4.7GB disc? Why would it do that?

Thanks All

Posted

An avi file is probably in one of the advanced formats, like divx or dvix.

Burning a DVD will require Nero to re-encode this file into mpeg2, resulting in a much bigger file!

For DVD (mpeg2) you need roughly between 40 and 70 Mb per minute of video, while AVI will require only between 3 and 10 Mb/minute!

I don't use Nero, but try to find if you can find a setting where you can adjust the bitrate, then bring it gradually down until the movie will fit on one dvd. It will lose a bit in quality though...

Alternatively, split the avi in 2 pieces and then burn to two dvd's

You can use this piece of software to split avi files...

Hiya all

I would just like to clarify the file (Movie) is 701mb and Nero states it is to large to go on a 4.7GB disc? Why would it do that?

Thanks All

Posted
An avi file is probably in one of the advanced formats, like divx or dvix.

Burning a DVD will require Nero to re-encode this file into mpeg2, resulting in a much bigger file!

For DVD (mpeg2) you need roughly between 40 and 70 Mb per minute of video, while AVI will require only between 3 and 10 Mb/minute!

I don't use Nero, but try to find if you can find a setting where you can adjust the bitrate, then bring it gradually down until the movie will fit on one dvd. It will lose a bit in quality though...

Alternatively, split the avi in 2 pieces and then burn to two dvd's

You can use this piece of software to split avi files...

Hiya all

I would just like to clarify the file (Movie) is 701mb and Nero states it is to large to go on a 4.7GB disc? Why would it do that?

Thanks All

Cannot find the settings for changing the bitrate on Nero, will have ago with the AVI split.

Thanks Monty :o

Posted
An avi file is probably in one of the advanced formats, like divx or dvix.

Burning a DVD will require Nero to re-encode this file into mpeg2, resulting in a much bigger file!

For DVD (mpeg2) you need roughly between 40 and 70 Mb per minute of video, while AVI will require only between 3 and 10 Mb/minute!

I don't use Nero, but try to find if you can find a setting where you can adjust the bitrate, then bring it gradually down until the movie will fit on one dvd. It will lose a bit in quality though...

Alternatively, split the avi in 2 pieces and then burn to two dvd's

You can use this piece of software to split avi files...

Hiya all

I would just like to clarify the file (Movie) is 701mb and Nero states it is to large to go on a 4.7GB disc? Why would it do that?

Thanks All

Cannot find the settings for changing the bitrate on Nero, will have ago with the AVI split.

Thanks Monty :o

If you want to solve most of your problems the "ACONRTC, AN-801 ODW, DVD-RW+R Recorder" is the way to go. You can record two to three movies on a 4.7/1x4 or several songs. The unit is available from "best" outlets or I am sure other shops. Sure unties a lot of computer time..Jim

  • 1 month later...
Posted
An avi file is probably in one of the advanced formats, like divx or dvix.

Burning a DVD will require Nero to re-encode this file into mpeg2, resulting in a much bigger file!

For DVD (mpeg2) you need roughly between 40 and 70 Mb per minute of video, while AVI will require only between 3 and 10 Mb/minute!

I don't use Nero, but try to find if you can find a setting where you can adjust the bitrate, then bring it gradually down until the movie will fit on one dvd. It will lose a bit in quality though...

Alternatively, split the avi in 2 pieces and then burn to two dvd's

You can use this piece of software to split avi files...

Hiya all

I would just like to clarify the file (Movie) is 701mb and Nero states it is to large to go on a 4.7GB disc? Why would it do that?

Thanks All

Cannot find the settings for changing the bitrate on Nero, will have ago with the AVI split.

Thanks Monty :o

ive got the same problem you do i have nero and i use 4.7gb disks

i do have 1 worry though

awhile ago i split an avi file in 2 parts then got it into 2 disks

however the quality was just horrible it was pixelated and everything is there a way to prevent this? i really dont want that to happen for my next dvd im burning

so could you post how yours turned out?

*coughfmamoviecough*

Posted

If the file is too big, then it's too big.

I had this problem when ripping DVD's & soon realised that one certain way to overcome it was to buy a dual layer DVD burner.

EDIT: Dual layer DVD's are about 9 Gigabyte.

Posted
If the file is too big, then it's too big.

I had this problem when ripping DVD's & soon realised that one certain way to overcome it was to buy a dual layer DVD burner.

my dvd burner can burn all types or thats what my local computer store told me :\

HL-DT-ST DVD-RAM GSA-H22N

thats what it says in the device manager properties for my dvd drive

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.



×
×
  • Create New...