Skip to content
View in the app

A better way to browse. Learn more.

Thailand News and Discussion Forum | ASEANNOW

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Aquaponics watertank placement

Featured Replies

Plan A was to make some footings and place the 2000 L tank outside near the aquifer pump. Modify the passionfruit climbing steel, put up an insulated roof over the steel and slip the tank in under there.

 

Plan B would be to put the watertank in the 10 cm Q Con block fish tank room. As well as the insulation from the Q Con blocks, the room also has an insulated roof.

 

Thinking that any water I introduce into aquaponics system from the tank would be cooler water.

 

At the moment I'm thinking the water sump would be dug into the greenhouse floor, which means the circulating water is going to be fairly warm anyway.

 

Aim would be to grow Barramundi.

 

Does it matter?

 

Plan C?20190313_162230.jpeg20190313_162156.jpeg20190313_162254.jpeg

 

Sent from my SM-J700F using Tapatalk

 

 

Are you using the water tank for topping up your system ? Im wondering where it fits into your aquaponics system.

  • Author
Are you using the water tank for topping up your system ? Im wondering where it fits into your aquaponics system.
Thanks. Yes just for topping up for the aquaponics.


Sent from my SM-J700F using Tapatalk

Something to to think about, thats alot of water to be sitting stagnant unless you are using it for other purposes also and will be replenishing it continuously. I think if you kept your fish tanks inside, covered as you want to minimize any light/algae growth, then had your grow beds in your green house you would not have much water loss especially using your hydroton media and a bell siphon system for re-circulation. you could even wrap your pipes with insulation to reduce heat absorption.

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.