xastunts Posted May 11, 2013 Share Posted May 11, 2013 Mania those are the least of my concern. I could get those form 250 or something they are almost identical. Both of my fairings are broken, properly broken. My left handle bar is bent. Front indicators both of them broken. I just didn't specify all the stuff in the post above.Ahhh Sorry to hear that. Did not realize you had such a crash I slid on the roundabout. But when I stayed with my baby and wife int he hospital someone tried to brake into our house and dropped my bike on the side while nicking gas tank from the kitchen. I didnt expect simple drop like that to bend my handle bar. LL where did you get those front indicators? They look great! How much were they? We get jack s.... here in Chiang Rai. I also want to fit sliders. I agree with those front indicators are hot! But then maybe it's looking best on a red Colored bike. Sent from my GT-N7100 using Thaivisa Connect Thailand mobile app Link to comment Share on other sites More sharing options...
loserlazer Posted May 12, 2013 Share Posted May 12, 2013 LL Your saying you felt like you had a ignition cut off at a certain speed but you were not near redline? Did it just feel like a major bog? Maybe it is a fuel feed related deal & not ignition per se' Yes mania. I was not near redline - but close - and it cut.I thought about a fuelling problem but i redline every gear so why it needs to wait until 189 kmh at 6th gear magically? Still cbr500r is smooth and very stable at 189 kmh. Not even a shake and wants to go faster as still there is more room up there. Cool bike. LL 190may be the power limit. Just because you have a redline does not mean the bike can do it in top gear. Yankee, it was not like power limit. Engine cuts as there were still some room on the throttle and once i apply it full on 189 kmh ignition was cut but engine was still working so definitely not a stall too. Strange really but i am hundred percent sure it was not redline and it is not a fueling issue or power limit. I will try again to pass 190 kmh today and lets see:lol: And i personally do not find flush mounts super safe, i just tried and i liked them a lot. They look like a part of the bike and i decided to keep them. I bought them and sliders from k speed and you can order from them and they post anywhere in Thailand. Just give them a call. Good prices. Sent from my GT-N7100 using Thaivisa Connect Thailand mobile app 1 Link to comment Share on other sites More sharing options...
sup3r1or Posted May 12, 2013 Share Posted May 12, 2013 LL Your saying you felt like you had a ignition cut off at a certain speed but you were not near redline? Did it just feel like a major bog? Maybe it is a fuel feed related deal & not ignition per se' Yes mania. I was not near redline - but close - and it cut.I thought about a fuelling problem but i redline every gear so why it needs to wait until 189 kmh at 6th gear magically? Still cbr500r is smooth and very stable at 189 kmh. Not even a shake and wants to go faster as still there is more room up there. Cool bike. LL 190may be the power limit. Just because you have a redline does not mean the bike can do it in top gear. Yankee, it was not like power limit. Engine cuts as there were still some room on the throttle and once i apply it full on 189 kmh ignition was cut but engine was still working so definitely not a stall too. Strange really but i am hundred percent sure it was not redline and it is not a fueling issue or power limit. I will try again to pass 190 kmh today and lets see:lol: And i personally do not find flush mounts super safe, i just tried and i liked them a lot. They look like a part of the bike and i decided to keep them. I bought them and sliders from k speed and you can order from them and they post anywhere in Thailand. Just give them a call. Good prices. Sent from my GT-N7100 using Thaivisa Connect Thailand mobile app SO indicators you got from K speed as well? Do they have website? You installed it yourself?>\ Link to comment Share on other sites More sharing options...
loserlazer Posted May 12, 2013 Share Posted May 12, 2013 Just google k speed bangkok. Installation is free at their shop so they did it. Also you need some extra parts to install them. 700 thb plus 200 thb. Sent from my GT-N7100 using Thaivisa Connect Thailand mobile app Link to comment Share on other sites More sharing options...
mania Posted May 12, 2013 Share Posted May 12, 2013 Yankee, it was not like power limit. Engine cuts as there were still some room on the throttle and once i apply it full on 189 kmh ignition was cut but engine was still working so definitely not a stall too. Strange really but i am hundred percent sure it was not redline and it is not a fueling issue or power limit. I will try again to pass 190 kmh today and lets see:lol: And i personally do not find flush mounts super safe, i just tried and i liked them a lot. They look like a part of the bike and i decided to keep them. I bought them and sliders from k speed and you can order from them and they post anywhere in Thailand. Just give them a call. Good prices. That is a hard one to envision You say ignition cut but engine still working? I am not sure what you mean or experienced. Sup those flush mounts are everywhere & like LL said run 700 baht + you usually need to buy a 80 baht flasher relay + roughly 1-200 installation LL If you like those but want more safety they also have them more bubbled out but still flush if you know what I mean 1 Link to comment Share on other sites More sharing options...
xastunts Posted May 12, 2013 Share Posted May 12, 2013 Yankee, it was not like power limit. Engine cuts as there were still some room on the throttle and once i apply it full on 189 kmh ignition was cut but engine was still working so definitely not a stall too. Strange really but i am hundred percent sure it was not redline and it is not a fueling issue or power limit. I will try again to pass 190 kmh today and lets see:lol: And i personally do not find flush mounts super safe, i just tried and i liked them a lot. They look like a part of the bike and i decided to keep them. I bought them and sliders from k speed and you can order from them and they post anywhere in Thailand. Just give them a call. Good prices. That is a hard one to envisionYou say ignition cut but engine still working? I am not sure what you mean or experienced. Sup those flush mounts are everywhere & like LL said run 700 baht + you usually need to buy a 80 baht flasher relay + roughly 1-200 installation LL If you like those but want more safety they also have them more bubbled out but still flush if you know what I mean How about the tail? The rear indicators! Once modded the front i believe the rear ones also must be changed. Looks ugly with the rear ones in original. Maybe with abit of patience there will be a good pick out there soon. Sent from my GT-N7100 using Thaivisa Connect Thailand mobile app Link to comment Share on other sites More sharing options...
mania Posted May 12, 2013 Share Posted May 12, 2013 (edited) How about the tail? The rear indicators! Once modded the front i believe the rear ones also must be changed. Looks ugly with the rear ones in original. Maybe with abit of patience there will be a good pick out there soon.Oh trust me they are out there now One thing Thailand has is hundreds of choices for lights Just go look at some of the bigger shops online even at any of the Thai related forums Or depending where you live go heck some of the shops Tons of light choices & they all install them for 100-200 baht no prob Edited May 12, 2013 by mania Link to comment Share on other sites More sharing options...
loserlazer Posted May 12, 2013 Share Posted May 12, 2013 (edited) Yeah. Millions of choices out there for signals. I will change the rear indicators soon. The ones on my cbr250 are cool enough. But very busy nowadays with work:( Sent from my GT-N7100 using Thaivisa Connect Thailand mobile app Edited May 12, 2013 by loserlazer Link to comment Share on other sites More sharing options...
loserlazer Posted May 12, 2013 Share Posted May 12, 2013 Yankee, it was not like power limit. Engine cuts as there were still some room on the throttle and once i apply it full on 189 kmh ignition was cut but engine was still working so definitely not a stall too. Strange really but i am hundred percent sure it was not redline and it is not a fueling issue or power limit. I will try again to pass 190 kmh today and lets see:lol: And i personally do not find flush mounts super safe, i just tried and i liked them a lot. They look like a part of the bike and i decided to keep them. I bought them and sliders from k speed and you can order from them and they post anywhere in Thailand. Just give them a call. Good prices. That is a hard one to envisionYou say ignition cut but engine still working? I am not sure what you mean or experienced. Sup those flush mounts are everywhere & like LL said run 700 baht + you usually need to buy a 80 baht flasher relay + roughly 1-200 installation LL If you like those but want more safety they also have them more bubbled out but still flush if you know what I mean The only way to figure it out is reaching 189 kmh again. The engine was working but not the throttle. So like it was not fuelling. Will kerp these flush mountd for a while mania. They are big enough but looking for a more bubbled one. Sent from my GT-N7100 using Thaivisa Connect Thailand mobile app Link to comment Share on other sites More sharing options...
xastunts Posted May 12, 2013 Share Posted May 12, 2013 Yankee, it was not like power limit. Engine cuts as there were still some room on the throttle and once i apply it full on 189 kmh ignition was cut but engine was still working so definitely not a stall too. Strange really but i am hundred percent sure it was not redline and it is not a fueling issue or power limit. I will try again to pass 190 kmh today and lets see:lol: And i personally do not find flush mounts super safe, i just tried and i liked them a lot. They look like a part of the bike and i decided to keep them. I bought them and sliders from k speed and you can order from them and they post anywhere in Thailand. Just give them a call. Good prices. That is a hard one to envisionYou say ignition cut but engine still working? I am not sure what you mean or experienced. Sup those flush mounts are everywhere & like LL said run 700 baht + you usually need to buy a 80 baht flasher relay + roughly 1-200 installation LL If you like those but want more safety they also have them more bubbled out but still flush if you know what I mean The only way to figure it out is reaching 189 kmh again. The engine was working but not the throttle. So like it was not fuelling. Will kerp these flush mountd for a while mania. They are big enough but looking for a more bubbled one. Sent from my GT-N7100 using Thaivisa Connect Thailand mobile app Do that on dyno or with full gear on track u less u have a death wish. Im just saying so u know before we see the rip lozerlaser topic Sent from my GT-N7100 using Thaivisa Connect Thailand mobile app Link to comment Share on other sites More sharing options...
loserlazer Posted May 12, 2013 Share Posted May 12, 2013 No worries, i am not crazy. Today could reach only 180 kmh at highway no 9. No proper and safe opennings to reach more than that. Sent from my GT-N7100 using Thaivisa Connect Thailand mobile app Link to comment Share on other sites More sharing options...
sup3r1or Posted May 12, 2013 Share Posted May 12, 2013 No worries, i am not crazy. Today could reach only 180 kmh at highway no 9. No proper and safe opennings to reach more than that. Sent from my GT-N7100 using Thaivisa Connect Thailand mobile app I did 169 last time was scared to go more, my real helmet is a pain in the ass it feels like the helmet is pulling me off the bike. Well it got stolen so Iam going to buy one from BigWing this time. Guys sorry for noob questions, but can you give me tips on finding stuff for my bike, where how, what to look out for, millions of choices I know but which ones will fit? I dont want to buy something that is not compatible with my bike or wont fit. Thank you 1 Link to comment Share on other sites More sharing options...
taninthai Posted May 12, 2013 Share Posted May 12, 2013 No worries, i am not crazy. Today could reach only 180 kmh at highway no 9. No proper and safe opennings to reach more than that. Sent from my GT-N7100 using Thaivisa Connect Thailand mobile app highway 9 is a sore point for me this week,drove the the truck south to north a few days ago got stuck on highway 9,pulled of it thinking I could find anothercway round ,100 km later still <deleted> around in nakkon pathom and omnoi had no choice to head back to highway 9........lolCurrently trying to plan return route avoiding it all..... Link to comment Share on other sites More sharing options...
mania Posted May 12, 2013 Share Posted May 12, 2013 Guys sorry for noob questions, but can you give me tips on finding stuff for my bike, where how, what to look out for, millions of choices I know but which ones will fit? I dont want to buy something that is not compatible with my bike or wont fit. Thank you I am sure many here will give you suggestions but.... What are you looking for? You need to narrow it down a bit Link to comment Share on other sites More sharing options...
yankee99 Posted May 12, 2013 Share Posted May 12, 2013 LL I really think that is the bikes capability....Here is a theoretical calculator for you to play with....Now my friends er6 maxed out at 220 in top gear without hitting redline and he has quite a few mods....pipe, sprockets etc!!! http://www.gearingcommander.com/ 1 Link to comment Share on other sites More sharing options...
loserlazer Posted May 17, 2013 Share Posted May 17, 2013 http://rideapart.com/2013/05/rideapart-review-2013-honda-cbr500r/ a nice review of cbr500r from ride apart. Link to comment Share on other sites More sharing options...
xastunts Posted May 17, 2013 Share Posted May 17, 2013 I can start! . First I would like to fit a proper brand of crash protectors (sliders). In plastic white would look really good and discreet on the white cbr 500R. I think I saw r&g sliders over at big wing before. But I think it was super small ones. http://www.getgeared.co.uk/r-and-g-aero-style-CP0282-left_l.jpg This is what I would like to put on the little beast! And after the sliders I want a full system exhaust. Not big wing s 40k and 50k ones. Maybe it will be the course ones when they got the full pipe in order Some better looking front and back indicators wouldn't be too bad . This is a 2011 tail tidy from r&g for cbr 250 is not the best looking but it would do it And a black wind screen, better looking for Pegs rider and pillion.one of those pillion seat replacement for a pure sport look Air brushed bike I think I could start of with that but wait with the airbrush mod. Anyone knows price for airbrush the whole bike like on the pic? About shops there are many low quality shops out there for parts etc. I found panda rider to be a proper accessories and appereal riding gear shop. Sent from my GT-N7100 using Thaivisa Connect Thailand mobile app Link to comment Share on other sites More sharing options...
xastunts Posted May 17, 2013 Share Posted May 17, 2013 This is not to bad Sent from my GT-N7100 using Thaivisa Connect Thailand mobile app 1 Link to comment Share on other sites More sharing options...
xastunts Posted May 17, 2013 Share Posted May 17, 2013 Anyone know where to get racing stickers for whole bike? If not the is always eBay. . Sent from my GT-N7100 using Thaivisa Connect Thailand mobile app Link to comment Share on other sites More sharing options...
yankee99 Posted May 17, 2013 Share Posted May 17, 2013 Anyone know where to get racing stickers for whole bike? If not the is always eBay. . Sent from my GT-N7100 using Thaivisa Connect Thailand mobile app Are you going to airbrush then add the stickers -1 Link to comment Share on other sites More sharing options...
xastunts Posted May 17, 2013 Share Posted May 17, 2013 Anyone know where to get racing stickers for whole bike? If not the is always eBay. . Sent from my GT-N7100 using Thaivisa Connect Thailand mobile app Are you going to airbrush then add the stickers -1 Haha you fool . Ofcourse not if I can I will only add stickers and get no paint job. Easier to change when you want a new look. Sent from my GT-N7100 using Thaivisa Connect Thailand mobile app Link to comment Share on other sites More sharing options...
Neilly Posted May 17, 2013 Share Posted May 17, 2013 Anyone know where to get racing stickers for whole bike? If not the is always eBay. . Sent from my GT-N7100 using Thaivisa Connect Thailand mobile app Give this guy a shout...maybe he can do road bikes as well as dirt bikes http://translate.google.com/translate?depth=1&hl=de&rurl=translate.google.com&sl=th&tl=en&u=http://www.dirtriderthailand.com/webboard/index.php%3FPHPSESSID%3D588b7981c0d5160e0291b77ab273ed96%26topic%3D493.0 1 Link to comment Share on other sites More sharing options...
KRS1 Posted May 17, 2013 Share Posted May 17, 2013 (edited) No worries, i am not crazy. Today could reach only 180 kmh at highway no 9. No proper and safe opennings to reach more than that. Sent from my GT-N7100 using Thaivisa Connect Thailand mobile app I did 169 last time was scared to go more, my real helmet is a pain in the ass it feels like the helmet is pulling me off the bike. Well it got stolen so Iam going to buy one from BigWing this time. Guys sorry for noob questions, but can you give me tips on finding stuff for my bike, where how, what to look out for, millions of choices I know but which ones will fit? I dont want to buy something that is not compatible with my bike or wont fit. Thank you send these guys an email http://www.cbr500.net Edited May 17, 2013 by KRS1 Link to comment Share on other sites More sharing options...
xastunts Posted May 17, 2013 Share Posted May 17, 2013 Anyone know where to get racing stickers for whole bike? If not the is always eBay. . Sent from my GT-N7100 using Thaivisa Connect Thailand mobile app Give this guy a shout...maybe he can do road bikes as well as dirt bikes http://translate.google.com/translate?depth=1&hl=de&rurl=translate.google.com&sl=th&tl=en&u=http://www.dirtriderthailand.com/webboard/index.php%3FPHPSESSID%3D588b7981c0d5160e0291b77ab273ed96%26topic%3D493.0 thx for that! i can atleast get a few good stickers from them even if its for dirtbikes.some race nr logos monster logo etc. Link to comment Share on other sites More sharing options...
bramds Posted May 18, 2013 Share Posted May 18, 2013 Go to tarad Poon Sup in Pathum Thani, those guys can make you any sticker you want and it is very cheap. 1 Link to comment Share on other sites More sharing options...
xastunts Posted May 18, 2013 Share Posted May 18, 2013 Go to tarad Poon Sup in Pathum Thani, those guys can make you any sticker you want and it is very cheap. Tarad market? Poon sup is the name of market? Sent from my GT-N7100 using Thaivisa Connect Thailand mobile app Link to comment Share on other sites More sharing options...
xastunts Posted May 18, 2013 Share Posted May 18, 2013 I did a home made mod today! Removed the pillion hand grip at the rear and placed white plastics to cover the wholes after. This is just temporarly as I want to install the race seat that totally removes the pillion seat and replaces with a nice rounded white plastics. But in the meantime this is what I got I think it looks so much better without the hand grips at the rear. Looks like a scooter setup with those on. Let me know what you guys think! Sent from my GT-N7100 using Thaivisa Connect Thailand mobile app 1 Link to comment Share on other sites More sharing options...
xastunts Posted May 18, 2013 Share Posted May 18, 2013 I just looked the photos I uploaded and maybe I should just but a can of white spray and spray those plastics parts. I think I might do that. Sent from my GT-N7100 using Thaivisa Connect Thailand mobile app Link to comment Share on other sites More sharing options...
bramds Posted May 19, 2013 Share Posted May 19, 2013 I did a home made mod today! Removed the pillion hand grip at the rear and placed white plastics to cover the wholes after. This is just temporarly as I want to install the race seat that totally removes the pillion seat and replaces with a nice rounded white plastics. But in the meantime this is what I got I think it looks so much better without the hand grips at the rear. Looks like a scooter setup with those on. Let me know what you guys think! Sent from my GT-N7100 using Thaivisa Connect Thailand mobile app Personally I think the handgrips look quite nice on the 500. They look like mean devil horns. 1 Link to comment Share on other sites More sharing options...
bramds Posted May 19, 2013 Share Posted May 19, 2013 Go to tarad Poon Sup in Pathum Thani, those guys can make you any sticker you want and it is very cheap. Tarad market? Poon sup is the name of market? Sent from my GT-N7100 using Thaivisa Connect Thailand mobile app Google maps coordinates of tarad Poon Sup 14.005053,100.55872 Make sure to bring someone with you who speaks Thai, because nobody there speaks English. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now