georgemandm Posted October 3, 2016 Share Posted October 3, 2016 3 minutes ago, swerver said: Correct, if the hydraulics fail then NOTHING will happen. But if the driver in the cab hits the operating lever then something will happen, as in this case. Remember recently another identical thing did happen but that driver said he accidentally bumped the operating lever. Those truck have a PTO pump on them to work the hydraulic rams and the driver has to Engage it . to make it go up . Link to comment Share on other sites More sharing options...
shaggy851 Posted October 3, 2016 Share Posted October 3, 2016 the taxi would have been sreaming along which goes by bahts per kilometers and not by the usual kilometers per hour speed when foreign tourists are onboard. The speedo is an ornament likely with a picture or the king covering it along with half a dozen amulets, at that point getting to your destination is in buhddas hands, lol. Truck driver standard, high on yaba left the pto engaged with tray in air, likely bypassed or unoperational alarm by some other cowboy, also lol:D Link to comment Share on other sites More sharing options...
CGW Posted October 3, 2016 Share Posted October 3, 2016 41 minutes ago, georgemandm said: Tell me are you a truck driver if you are like I was that is impossible to happen ok like you say ok number 1 the drive forgot to drop it at his last job ok , that is more likely for it to be up . Because you have to put the p t o pump on manually for it to go up I drive those trucks for 15 years. I am not a truck driver though I have worked with Hydraulic systems for 40 years, in this instance I would guess that it was driver error! There is a vague possibility of a leak having caused it? if a valve bypasses due to "leakage" strange things can happen! as you state you have to "engage" the pump manually to give pressure to the Hydraulic system, to engage the system manually would entail opening a valve - would it not? if this valve was bypassing due to leakage or whatever, the system would be pressurized, also having seen the standard of maintenance on Thai trucks I seriously doubt the system perfect - I could off course be completely wrong! Link to comment Share on other sites More sharing options...
MichaelJohn Posted October 3, 2016 Share Posted October 3, 2016 I've heard of Hydraulic Bounce before, where bumps in the road cause the bed of a tipper to raise as fluid seeps past the closed (faulty) valve . I guess the driver was already within and inch or two of the back of the truck before it hit the bridge?! Link to comment Share on other sites More sharing options...
georgemandm Posted October 3, 2016 Share Posted October 3, 2016 1 minute ago, CGW said: I am not a truck driver though I have worked with Hydraulic systems for 40 years, in this instance I would guess that it was driver error! There is a vague possibility of a leak having caused it? if a valve bypasses due to "leakage" strange things can happen! as you state you have to "engage" the pump manually to give pressure to the Hydraulic system, to engage the system manually would entail opening a valve - would it not? if this valve was bypassing due to leakage or whatever, the system would be pressurized, also having seen the standard of maintenance on Thai trucks I seriously doubt the system perfect - I could off course be completely wrong! No you have engage the PTO before anything will work POT not on then it can't work , it is in possible for it to go up with out the POT pump turned on . Link to comment Share on other sites More sharing options...
georgemandm Posted October 3, 2016 Share Posted October 3, 2016 3 minutes ago, MichaelJohn said: I've heard of Hydraulic Bounce before, where bumps in the road cause the bed of a tipper to raise as fluid seeps past the closed (faulty) valve . I guess the driver was already within and inch or two of the back of the truck before it hit the bridge?! No hydraulics work with out a pump , you have to understand a pump drives the hydraulic System and trucks have POT to drive them I had a truck like that for 15 years I should know would you think . Link to comment Share on other sites More sharing options...
impulse Posted October 3, 2016 Share Posted October 3, 2016 In fairness to the van driver, a safe following distance gives you reaction time and a little bit of difference in braking distance. If you're at the recommended safe following distance and the truck hits a bridge and stops in a meter or so, all bets are off. On a city highway, you can't leave enough distance between you and the truck in front of you for this kind of contingency. If you did, a dozen other cars would be in that space before you could blink. That's not to say he was, but he could have been driving safely and still gotten caught out. Any of us could. Link to comment Share on other sites More sharing options...
anon4637435435 Posted October 3, 2016 Share Posted October 3, 2016 6 hours ago, ChrisY1 said: I doubt it....the hydraulic pump, which runs off the PTO, would need to be engaged....my guess is the truck bin was not lowered, or only partially lowered. Operator error. Thats my thoughts. The tray wasnt lowered. Failing hydraulics could be as simple as a leaking seal. Enough force will move it but unlikely considering the angles and weight. My guess is its a combination and could be put down to poor maintenance and negligence. Link to comment Share on other sites More sharing options...
hansnl Posted October 3, 2016 Share Posted October 3, 2016 6 hours ago, colinneil said: Is this just another piece of bs? Usually when the hydraulics fail the ram would not push up. Or am i missing something. TIT Things might work the other way? Link to comment Share on other sites More sharing options...
metisdead Posted October 3, 2016 Share Posted October 3, 2016 Nonsense posts have been removed. Link to comment Share on other sites More sharing options...
Grubster Posted October 3, 2016 Share Posted October 3, 2016 7 hours ago, jackspratt498 said: "As he approached the scene there was a lot of dust and he could not see anything..." So, at this point of course he stops right? Because, if you're driving a minivan with a bunch of people, of course you're not going to just keep driving forward right? Because you can't see what's in front of you and that's really, reeeaallly important right? If you can't outright stop you're going to slow waaay down as safely and as quickly as possible because, what's causing all that dust right? Right? Ahh <deleted> it! Just keep going. So back to the story where of course " ...he smacked into the back of the truck." Correct any good driver would slow down hard and then pump your brakes to warn those behind, should be a natural reflex really, no thinking involved, just automatic. Sad isn't it. Link to comment Share on other sites More sharing options...
SOTIRIOS Posted October 3, 2016 Share Posted October 3, 2016 ...will probably be the least of their worries at the end..... ...let them go walking in Pattaya especially...or snorkeling...or even checking into any hotel....they will be potentially risking their lives... ...oh yeah...forgot to mention 'VIP' vans and buses ..... ...and hope they keep away from Bridge....Bingo and Dominoes.... Link to comment Share on other sites More sharing options...
Grubster Posted October 3, 2016 Share Posted October 3, 2016 1 hour ago, CGW said: I am not a truck driver though I have worked with Hydraulic systems for 40 years, in this instance I would guess that it was driver error! There is a vague possibility of a leak having caused it? if a valve bypasses due to "leakage" strange things can happen! as you state you have to "engage" the pump manually to give pressure to the Hydraulic system, to engage the system manually would entail opening a valve - would it not? if this valve was bypassing due to leakage or whatever, the system would be pressurized, also having seen the standard of maintenance on Thai trucks I seriously doubt the system perfect - I could off course be completely wrong! I know in the US they also have a lock down lever that locks the bed down, its normally a pretty hard lever to pull and takes considerable force to release. Link to comment Share on other sites More sharing options...
dieseldave1951 Posted October 3, 2016 Share Posted October 3, 2016 7 hours ago, CGW said: If a "valve" in the hydraulic system failed it would allow fluid to bypass and and lift the back? i thought you had to engage the power take off that supplies the hyd pump, also there is a fail safe while the vehicle is moving the PTO is locked out ???? ops sorry we are in Thailand fail safe does not apply or has been bypassed PTO engaged all the time silly me Link to comment Share on other sites More sharing options...
oldsailor35 Posted October 3, 2016 Share Posted October 3, 2016 Always something 'Failed' if it is'nt the brakes its the steering, this time its the Hydraulics. Nothing to do with the drivers of course. Link to comment Share on other sites More sharing options...
Si Thea01 Posted October 3, 2016 Share Posted October 3, 2016 2 hours ago, georgemandm said: Tell me are you a truck driver if you are like I was that is impossible to happen ok like you say ok number 1 the drive forgot to drop it at his last job ok , that is more likely for it to be up . Because you have to put the p t o pump on manually for it to go up I drive those trucks for 15 years. I was just wondering, seeing he was asking a question, whether or not there was a word out of place. He initially asked, Quote > "If a "valve" in the hydraulic system failed it would allow fluid to bypass and and lift the back? I can see a question here but being worded in this manner it would solicit a different response. If it read, " If a "valve" in the hydraulic system failed would it allow fluid to bypass and and lift the back? This makes more sense, however one should consider the alternatives when noting he ended the initial sentence with a question mark. Don't know if I'm correct, maybe he'll let us know. Link to comment Share on other sites More sharing options...
oldsailor35 Posted October 3, 2016 Share Posted October 3, 2016 1 hour ago, georgemandm said: I seen the Sydney one as well it is driver era that makes the try go up , impossible to go up for by it self . Yes but that's Sydney. In Thailand there is no such a thing as 'driver error' Link to comment Share on other sites More sharing options...
CGW Posted October 3, 2016 Share Posted October 3, 2016 ^^ I should have written "could" instead of "would. which I said later - without looking at the system I have no idea, how it operates, given the expertise of Thai specialist mechanics who knows if the system is as built, most Hyd systems are fairly complex and are "fail safe" but they have to be maintained correctly, which can be costly! An example of cost cutting on a hydraulic system which ended up costing billions!! was the BOP hydraulic system that wouldn't close on the Deepwater Horizon as it had not been maintained to OEM standards - to put it politely! Would poor maintenance happen here? at least the driver didn't do a runner as is usually the norm! Link to comment Share on other sites More sharing options...
spacelord Posted October 3, 2016 Share Posted October 3, 2016 The fact that he could not see anything certainly did not cause him to slow down or drive with any sort of caution. Rather, in true Thai fashion he probably said "mai pen rai," closed his eyes, and stepped on the gas!!! Link to comment Share on other sites More sharing options...
kiwikeith Posted October 3, 2016 Share Posted October 3, 2016 9 hours ago, jackspratt498 said: "As he approached the scene there was a lot of dust and he could not see anything..." So, at this point of course he stops right? Because, if you're driving a minivan with a bunch of people, of course you're not going to just keep driving forward right? Because you can't see what's in front of you and that's really, reeeaallly important right? If you can't outright stop you're going to slow waaay down as safely and as quickly as possible because, what's causing all that dust right? Right? Ahh <deleted> it! Just keep going. So back to the story where of course " ...he smacked into the back of the truck." And the truck driver fell asleep and hit the hydraulic switch ------ The car driver behind thought, get out of my way , come on hurry up , smack. Link to comment Share on other sites More sharing options...
msg4869 Posted October 3, 2016 Share Posted October 3, 2016 Most likely operator error Link to comment Share on other sites More sharing options...
rollrunna Posted October 3, 2016 Share Posted October 3, 2016 But not as good as the lechie monk story ...... Link to comment Share on other sites More sharing options...
gemguy Posted October 3, 2016 Share Posted October 3, 2016 Hmmm...And no one tried to conveniently blame the Foreigners involved..... Cheers Link to comment Share on other sites More sharing options...
Xircal Posted October 3, 2016 Share Posted October 3, 2016 8 hours ago, klauskunkel said: 'What does this button do? Should I press it? I know all the other buttons, but this one is shiny! I'm just going to touch it a little bit, real quick...hmm, nothing... try again. Soo shiny...' It's the button for the ejector seat which will catapult you to kingdom come. Link to comment Share on other sites More sharing options...
tomyumchai Posted October 3, 2016 Share Posted October 3, 2016 13 hours ago, jackspratt498 said: "As he approached the scene there was a lot of dust and he could not see anything..." So, at this point of course he stops right? Because, if you're driving a minivan with a bunch of people, of course you're not going to just keep driving forward right? Because you can't see what's in front of you and that's really, reeeaallly important right? If you can't outright stop you're going to slow waaay down as safely and as quickly as possible because, what's causing all that dust right? Right? Ahh <deleted> it! Just keep going. So back to the story where of course " ...he smacked into the back of the truck." Days of thunder..... see that smoke n just floor it through to victory....... or the back of a truck that caused the cloud....oh hum.... Link to comment Share on other sites More sharing options...
tomyumchai Posted October 3, 2016 Share Posted October 3, 2016 13 hours ago, colinneil said: Is this just another piece of bs? Usually when the hydraulics fail the ram would not push up. Or am i missing something. 13 hours ago, colinneil said: Is this just another piece of bs? Usually when the hydraulics fail the ram would not push up. Or am i missing something. 13 hours ago, colinneil said: Is this just another piece of bs? Usually when the hydraulics fail the ram would not push up. Or am i missing something. Yup. Just ask hundreds of famalies all over the world that have lost loved ones after hydraulic rams have failed and crushed people while working under them. I personally know of 3 victims. Of course, in thailand the rams would raise on their own when they fail and only the bridges get hurt. Link to comment Share on other sites More sharing options...
surangw Posted October 3, 2016 Share Posted October 3, 2016 does insurance cover removing the skid marks off the passenger seats ? Link to comment Share on other sites More sharing options...
whaleboneman Posted October 3, 2016 Share Posted October 3, 2016 6 hours ago, dieseldave1951 said: i thought you had to engage the power take off that supplies the hyd pump, also there is a fail safe while the vehicle is moving the PTO is locked out ???? ops sorry we are in Thailand fail safe does not apply or has been bypassed PTO engaged all the time silly me I guess you've never seen a dump truck driving forward and tipping his load at the same time? Link to comment Share on other sites More sharing options...
matador007 Posted October 3, 2016 Share Posted October 3, 2016 This happens in "1st World" Countries too, like Canada. http://www.cbc.ca/news/canada/hamilton/trucker-who-crashed-dump-truck-in-burlington-skyway-sentenced-to-jail-time-1.3683838 The driver was drunk, and somehow blood/breath tests ruled inadmissable. Probably something similar for both accidents -- lack of training (and drunk). Link to comment Share on other sites More sharing options...
Golden Triangle Posted October 3, 2016 Share Posted October 3, 2016 8 hours ago, cumgranosalum said: It's nice to see what superb drivers some TV members are as they assert their superiority over Thai people based on a 4 line translated post from the local press....hard to imagine what it's like to be such a perfect driver.......... Maybe you need some lessons then, I have driven everything fro motorcycles to HGV 1 and coaches all over the world, every bend, every corner, every junction, every other road user and pedestrian equates to a hazard that needs to be recognised evaluated and taken into consideration. Something the idiot drivers over here don't comprehend. Sample of Thai driving thought processes = Oh bugger it's raining, I know, if I go faster with no lights on I will get home more quickly, oh poo where did that other car with no lights on doing 140 KM in this weather come from. Hello Buddha. And you have the temerity to defend them.................... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now