Precision Machining On A Lathe

[Quickmill]

Hi,

I'm seeking to get advise about a workshop in Bangkok ( any area) who can do precision machining on a lathe.

My need it's related to realize a single special part for a coffee machine as prototype.

If somebody had already direct positive experience with some of them or any good advice, I will appreciate your suggestion.

Thank you.

Giampiero

[SimonD]

No direct experience but an idea or two...

Find a university or college with an engineering department.

Metalex trade show coming up at BITEC, 21st - 24th November. You'll need to register.

This topic would be better off in the Bangkok forum.

[mogandave]

Good, cheap shops are all over, I would not mess with a school.

What kind of tolerance and what kind of material?

[Quickmill]

Hi and thank you for suggestion.

Material is brass, tolerance between 0,05 to 0,2 mm.

I need to machining the parts in both axes with a specific angle.

What I'm looking for it's a place where they can even read and understand properly the technical drawing, or if not just with proved experience to carry as well the job.

In effect to contact some technical school such as Don Bosco could be useful and maybe they could be find my project even interesting for a school internal project, the Metalex trade show date it's to far.

Anyway more suggestion are welcome as the first one already gave to me some idea.

Thank you.

Giampiero