Ordered today lid to my d max from aeroclas ( Transformer) , paid 21,500 baht including labor and paint job .

http://www.deck-cover.com/product/tranformer.php

Sorry to say you cant compare it to a carry Boy one although more expensive your one is just what it say's a lid.

Sorry to say you cant compare it to a carry Boy one although more expensive your one is just what it say's a lid.

I think the Areoclass lid can definitely be compared to the carryboy one.

Sorry to say you cant compare it to a carry Boy one although more expensive your one is just what it say's a lid.

I think the Areoclass lid can definitely be compared to the carryboy one.

I was thinking more of their Aerodynamic design one, at about 30,000bt I paid 25thou for my one some 5years ago, not cheap but look's the part and solid as a rock. Sorry no snap but someone must be able to put one in.

I have an Aeroklas lid, the best fitting one out there.

Sorry to say you cant compare it to a carry Boy one although more expensive your one is just what it say's a lid.

Have compared all three and have not found much difference in them more than that price is the major difference. carryboy smx , topup and aeroclas.

So if you want to take a Trail Bike around, do you leave the Lid behind.?. Rope n Sheet seems better value, but they dont put those useful roping points down the sides anymore i notice.

So if you want to take a Trail Bike around, do you leave the Lid behind.?. Rope n Sheet seems better value, but they dont put those useful roping points down the sides anymore i notice.

Definitely won't get a big bike under a lid, maybe a scooter though.

So if you want to take a Trail Bike around, do you leave the Lid behind.?. Rope n Sheet seems better value, but they dont put those useful roping points down the sides anymore i notice.

Definitely won't get a big bike under a lid, maybe a scooter though.

Dam_n Spoonman,you must be one un-happy Rrr-n-ger owner...with your mishap... ...this set-up looks(ed) good

Sold the bike a long time ago, Ranger still in bits.

This is how I roll these days.

I have an Aeroklas lid, the best fitting one out there.

I paid a little more for the superup, all 4 lifts motorized hydrolics, no hand locking to keep in place and can do all from inside or outside. I checkecked a lot out and this has a super tight fit, you get what you pay for, I see a lot going down the road with gaps and wobbling, and I checked several trucks that them all installed and I went to superup and never looked back!

I have a CBoy on my dmax came with it when i bought the truck. Biggest pos i have owned. New motors, rams, gears wiring and still doesnt work right. Maybe its the pattaya service places fault but they a representing the mfg.

I have an Aeroklas lid, the best fitting one out there.

I paid a little more for the superup, all 4 lifts motorized hydrolics, no hand locking to keep in place and can do all from inside or outside. I checkecked a lot out and this has a super tight fit, you get what you pay for, I see a lot going down the road with gaps and wobbling, and I checked several trucks that them all installed and I went to superup and never looked back!

Difference between superup and aeroklass is that you can open it from the inside feel I have no need for it but the quality between these two is probably the same. what did you pay for superup? and you can remove the cover if you have a need for it? what time does it take? . Think that most people with wobbling lid´s took the lid off and they did not install it properly.

I have an Aeroklas lid, the best fitting one out there.

I paid a little more for the superup, all 4 lifts motorized hydrolics, no hand locking to keep in place and can do all from inside or outside. I checkecked a lot out and this has a super tight fit, you get what you pay for, I see a lot going down the road with gaps and wobbling, and I checked several trucks that them all installed and I went to superup and never looked back!

Difference between superup and aeroklass is that you can open it from the inside feel I have no need for it but the quality between these two is probably the same. what did you pay for superup? and you can remove the cover if you have a need for it? what time does it take? . Think that most people with wobbling lid´s took the lid off and they did not install it properly.

I have had a SuperUp on a Triton for the last two years. Very solid and the opening from the inside is useful when arriving at golf courses. I paid about 29k then but have never removed it - apparently it is not difficult but you would probably need at least 3 people. Also has a light inside but have hardly ever used it.

Very secure as no way to open it from the outside if the switch to juice it up is not on.

Took 4 blokes about 4 hours to fit mine . Then at home I had to dismantle it all to line it up properly.

I have an Aeroklas lid, the best fitting one out there.

I paid a little more for the superup, all 4 lifts motorized hydrolics, no hand locking to keep in place and can do all from inside or outside. I checkecked a lot out and this has a super tight fit, you get what you pay for, I see a lot going down the road with gaps and wobbling, and I checked several trucks that them all installed and I went to superup and never looked back!

Difference between superup and aeroklass is that you can open it from the inside feel I have no need for it but the quality between these two is probably the same. what did you pay for superup? and you can remove the cover if you have a need for it? what time does it take? . Think that most people with wobbling lid´s took the lid off and they did not install it properly.

Paid 28,000 for superup. Can't say about removal as I never intendto do so never ask. I think you are right though, I thing the Super Up and the Aeroclass are built same place, I like the inside remote!