Gweiloman Posted February 28, 2015 Share Posted February 28, 2015 UK MOT requirement is 60-120 flashes per minute http://www.motuk.co.uk/manual_140.htm Good to know there are standards, so 1-2 bpm seems to be the norm. Wonder what it is in Thailand or if it differs from a country to country. What about my blinking brakes? Is that legal? Almost certainly (would be in the UK). I find them incredibly distracting, in poor visibility is he turning or stopping (particularly when the BDI has a non-standard rear light)? What is wrong with yellow flashers going at 1-2Hz, red tail lights on constantly at about 2 Watts, red stop lights on bright at 21W when braking? These are globally recognised vehicle illumination (EDIT OK maybe not in the US), anything non-standard causes confusion and potential delay in reacting to the situation. My 2 tons of pickup up the rear of your 100kg motorcycle because I didn't understand your intention to turn right across my path (at least with a yellow flasher I might be on the brakes when I flatten you). If we were living anywhere else in the world except Thailand, I would agree with you. But here in the LOS, we know what the drivers are like. Anything that would wake them up out of their reverie is better than nothing. We have seen how motorcyclists and even motorists ride/drive by riding their brakes causing the stop light to be continuously on (as opposed to merely "covering" them which does not make the stop light come on unless you are riding at 200 mph in which case you should have slots in your brake lever so that the wind does not force the lever back making the brake light come on but then again, if you are riding at 200 mph, you don't need to worry much about anyone up your posterior). Naturally, I would not be worried about your 2 ton pickup up the rear of my bike as you are a western trained driver and would have been able to realise in a split second that I'm slowing down, whether it be to turn or to stop and you would be keeping your 2 second distance by hovering your feet over your brakes in any case. What I used to do to get rid of tailgaters (when driving a car) is to depress the brake pedal ever so slightly with my left foot while still having my right foot on the accelerator. Wouldn't risk doing this on a bike. Instead, I will ride ever so slightly faster than them because riding at the same speed as the rest of the traffic is, IN MY OPINION, dangerous. Having said that though, some experts state that it's safer to be amongst other cars, SUV's, pickups, trucks and buses so I'm confused. 1 Link to comment Share on other sites More sharing options...
Gonsalviz Posted February 28, 2015 Share Posted February 28, 2015 How much wood could a woodchuck chuck if a woodchuck could chuck wood? 1 Link to comment Share on other sites More sharing options...
Gonsalviz Posted February 28, 2015 Share Posted February 28, 2015 Google could be your friend. Since I don't care, I didn't check. Link to comment Share on other sites More sharing options...
Hopho Posted February 28, 2015 Share Posted February 28, 2015 It also comes down to location of manufacture. Chinese manufactured blinkers blink more incorrectly. 1 Link to comment Share on other sites More sharing options...
Gweiloman Posted February 28, 2015 Share Posted February 28, 2015 How much wood could a woodchuck chuck if a woodchuck could chuck wood? A woodchuck could chuck as much wood as a woodchuck could chuck if a woodchuck could chuck wood Link to comment Share on other sites More sharing options...
JonnyF Posted March 1, 2015 Share Posted March 1, 2015 40:1 on my 2 stroke. My 4 stroke only blinks every other revolution, which is good as my girlfriend is epileptic. Totally different story once I switch to fully synthetic though... Link to comment Share on other sites More sharing options...
papa al Posted March 2, 2015 Share Posted March 2, 2015 OP: 1-2Hz. Rate can be slowed with a resistor in series, increased with more load in parallel. Post 25: An Italian what? Bend her over? And 'winker' [unilateral] is more accurate terminology than 'blinker' [bilateral], right? 1 Link to comment Share on other sites More sharing options...
dave_boo Posted March 2, 2015 Share Posted March 2, 2015 OP: 1-2Hz. Rate can be slowed with a resistor in series, increased with more load in parallel. Post 25: An Italian what? Bend her over? And 'winker' [unilateral] is more accurate terminology than 'blinker' [bilateral], right? Both my front and rear lights blink... Link to comment Share on other sites More sharing options...
papa al Posted March 2, 2015 Share Posted March 2, 2015 I close one eye to wink. I blink with two. Sure, I can set just one to blinking, but can't wink with two. papa can wink at two if they are close together. Link to comment Share on other sites More sharing options...
Shurup Posted March 2, 2015 Author Share Posted March 2, 2015 Of course you can wink with 2. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now